Sony VPCL212FX VPCL1 Series Hard Disk Drive Replacement Instructions
Sony VPCL212FX Manual
UPC - 027242820449
View all Sony VPCL212FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony VPCL212FX manual content summary:
- Sony VPCL212FX | VPCL1 Series Hard Disk Drive Replacement Instructions - Page 1
VPCL1 Series Hard Disk Drive Replacement Instructions IMPORTANT! PLEASE READ BEFORE YOU START These easy instructions are intended to guide incorrect handling of the computer under these procedures. The terms of your Sony limited warranty continue to apply. Step 1. Prepare the Computer. CAUTION: - Sony VPCL212FX | VPCL1 Series Hard Disk Drive Replacement Instructions - Page 2
VPCL1 Series Hard Disk Drive Replacement Instructions Step 4. Carefully lift the stand (Bottom side Step 5. Set HDD cover aside once Step 6. Identify the (4) screws securing first) to remove the HDD access cover. - Sony VPCL212FX | VPCL1 Series Hard Disk Drive Replacement Instructions - Page 3
VPCL1 Series Hard Disk Drive Replacement Instructions Step 12. All (4) screws and bracket Step 13. After the HDD is completely Step 14. Remove the (2) screws to be should now be removed from - Sony VPCL212FX | VPCL1 Series Hard Disk Drive Replacement Instructions - Page 4
VPCL1 Series Hard Disk Drive Replacement Instructions Step 20. Once connectors are properly Step 21. in power cord. Power on your computer and continue with the recovery process by following the instructions described on the back of the recovery disk's case. Step 23. Re-install the (4) screws
VPCL1 Series Hard Disk Drive
Replacement Instructions
P/N
989200672
Rev. A
1/4
Carefully lay computer down. LCD
face down.
Step
2.
Identify
the
(4)
screws
securing the HDD access cover/Rear
Stand.
(HDD Removal) Steps 3-9
Step 3.
Using the enclosed magnetic
screwdriver,
remove the two (4) screws
securing the HDD access cover.
Step 1.
Prepare the Computer.
CAUTION
:
Make sure the computer is
turned off, and the AC plug is disconnected.
Failure to do so can result in damage to the
computer.
Place the computer standing up on a
protected surface with the back portion
facing you.
These easy instructions are intended to guide you through the replacement process.
°
To avoid electric shock, please make sure product is turned off and the AC plug is disconnected from
the power source. Remove jewelry before you begin work to avoid scratching the surface of your
computer.*
°
Place your computer on a clean, stable and covered surface to avoid damage to the computer’s
case.*
°
Follow the ESD (Electrostatic Discharge) damage prevention instructions:
o
Hold parts by the edges, away from exposed circuitry when possible.
o
Do not walk around excessively as this promotes static build-up.
°
The appearance of the electronic components shown in the illustrations may be different from the
components shipped. This slight difference does not affect the accuracy of these instructions.
* Sony is not responsible for any loss of data associated with your computer or any damage caused by incorrect handling of
the computer under these procedures. The terms of your Sony limited warranty continue to apply.
IMPORTANT!
PLEASE READ BEFORE YOU START