Sony VPCL212FX VPCL2 Series Optical Disk Drive Replacement Instructions
Sony VPCL212FX Manual
UPC - 027242820449
View all Sony VPCL212FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony VPCL212FX manual content summary:
- Sony VPCL212FX | VPCL2 Series Optical Disk Drive Replacement Instructions - Page 1
YOU START These easy instructions will guide you through the Hard Drive replacement process. Before you begin, place your notebook computer on a clean or covered surface to avoid damage to the computer's case.* Follow the ESD (Electrostatic Discharge) damage prevention instructions: o Hold parts - Sony VPCL212FX | VPCL2 Series Optical Disk Drive Replacement Instructions - Page 2
slide to the Left. Step 7. Carefully remove the ODD Assembly from the unit. Optical Drive Disassembly (Steps 8-10) Step 8. Set the Optical Drive (Label Side Down) on a clean work surface. Identify the six (6) screws which secure the brackets to the Hard Drive. Step 9. Remove two screws from each - Sony VPCL212FX | VPCL2 Series Optical Disk Drive Replacement Instructions - Page 3
Disk Drive Replacement Instructions Old Hard Drive on the Bezel with the tab holes located on the ODD. Carefully press the Bezel into place. Step 13. Position the new . Step 14. Using the ODD Screws, install the ODD Brackets onto the new ODD. FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866 - Sony VPCL212FX | VPCL2 Series Optical Disk Drive Replacement Instructions - Page 4
with the recovery process by following the instructions described on the back of the recovery disk's case. Step 20. Re-install the four (4) Hard Drive Door Screws to secure the Door. Return the old Optical Drive to Sony using the included shipping instructions. FOR TECHNICAL SUPPORT IN THE
VPCL2 Series Optical Disk Drive
Replacement Instructions
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N
989202624
Rev. B
1/4
Disconnect the AC Adapter
Step 2.
The A/C Adapter connects to the
unit under the Stand. Reach behind the
Stand to disconnect the A/C Adapter
from the unit and remove.
Prepare the Computer
CAUTION
:
Make
sure
the
computer is turned off and the AC
Adapter is disconnected. Failure to do
so can result in damage to the
computer.
Step 1.
Place the computer, with the
LCD Panel facing down, on a protected
surface with the Stand facing you.
Hard Drive Door Removal
(Steps 3-4)
Step 3.
Using the enclosed magnetic
screwdriver,
remove
the
four
(4)
screws securing the Hard Drive Door.
Put the Screws aside to re-secure
the Hard Drive Door later in the
procedure.
These easy instructions will guide you through the Hard Drive replacement process.
Before you begin, place your notebook computer on a clean or covered surface to avoid
damage to the computer's case.*
Follow the ESD (Electrostatic Discharge) damage prevention instructions:
o
Hold parts by the edges, away from exposed circuitry when possible.
o
Do not walk around excessively as this promotes static build-up.
Before you begin, remove any jewelry you may be wearing to prevent scratches to the surface
of your notebook computer.*
The appearance of the electronic components shown in the illustrations may differ from the
components shipped. This slight difference does not affect the accuracy of these instructions.
* Sony is not responsible for damage caused by incorrect handling of the notebook computer.
IMPORTANT!
PLEASE READ BEFORE YOU START
Hard Drive Door