Sony VPL-FX40L Operating Instructions
Sony VPL-FX40L - XGA LCD Projector Manual
 |
UPC - 027242710436
View all Sony VPL-FX40L manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony VPL-FX40L manual content summary:
- Sony VPL-FX40L | Operating Instructions - Page 1
2-687-435-13 (1) Data Projector Operating Instructions VPL-FE40/FE40L VPL-FX40/FX40L © 2006 Sony Corporation - Sony VPL-FX40L | Operating Instructions - Page 2
both. To reduce the risk of fire or electric shock, refer servicing to qualified service personnel. WARNING: THIS WARNING IS APPLICABLE FOR OTHER COUNTRIES. 1 Use if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation - Sony VPL-FX40L | Operating Instructions - Page 3
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For the State of - Sony VPL-FX40L | Operating Instructions - Page 4
Conditions 7 Overview About the Supplied Manuals 8 Features 8 Location and Function of the Picture Installing the Projector 16 Connecting the Projector 17 Connecting a Computer Lamp 40 Cleaning the Air Filter 42 Others Troubleshooting 43 Messages List 46 Specifications 47 Dimensions 53 - Sony VPL-FX40L | Operating Instructions - Page 5
look into the lens while the lamp is on. Manual for Dealers throughly for safe installation. On illumination • To obtain the best picture, the front of the screen should not be exposed to direct lighting or sunlight. • Ceiling-mounted spot lighting is recommended. Use a cover over fluorescent lamps - Sony VPL-FX40L | Operating Instructions - Page 6
as it was originally packed at the factory. On LCD projector • The LCD projector is manufactured using high-precision technology. You may, however block-up, the temperature sensor will function with the message "High temp.! Lamp off in 1 min." The power will be turned off automatically after one - Sony VPL-FX40L | Operating Instructions - Page 7
the unit. Clean the air filter whenever you replace the lamp. Usage in High Altitude When using the unit at an the unit other than on the floor or ceiling. These installations may cause malfunction. Do not in front of the lens Do not place any object just in front of the lens that may block the - Sony VPL-FX40L | Operating Instructions - Page 8
(on the CD-ROM) This Operating Instructions describes how to set up and operate the network presentation. Installation Manual for Dealers (on the CD-ROM) This manual describes the information for mounting the optional lenses on the projector and installing the projector. Note You must have Adobe - Sony VPL-FX40L | Operating Instructions - Page 9
one Remote Commander when you use two or more projectors in one room. Simple maintenance Even when the projector is mounted on the ceiling you can change the lamp or clean the air filter easily because the replacement lamp is located at the side of the projector and the air filter is located at the - Sony VPL-FX40L | Operating Instructions - Page 10
• Air Shot is a trademark of Sony corporation. • "BrightEra" is a trademark of Sony corporation. Unless otherwise specified in notes, the VPL-FE40 described in this manual refers to both the VPL-FE40 and VPL-FE40L, and the VPL-FX40 refers to both the VPL-FX40 and VPL-FX40L. Location and Function of - Sony VPL-FX40L | Operating Instructions - Page 11
of 3 flashes when the lamp has reached the end of its life or reaches a high temperature. For details, see page 45. b ON/STANDBY indicator Lights up or flashes under the following conditions: - Lights in red when the AC power cord is plugged into a wall outlet. Once the projector is in standby mode - Sony VPL-FX40L | Operating Instructions - Page 12
FOCUS keys cannot be used when you attach the optional lens VPLL-1008 to the projector. f MENU key Displays the on-screen menu. Press again to clear ?/1 key for about one second. h INPUT key Select the input signal. Each time you press the key the input signal switches. i ENTER/v/V/b/B (Arrow) keys - Sony VPL-FX40L | Operating Instructions - Page 13
long distances, for example, when the projector has been hung from the ceiling. Computer, component (R-Y/Y/B-Y), HDTV or DTV (DTV GBR, DTV YPBPR) signal can be selected. AUDIO (stereo mini-jack) Connects to the audio output on a computer. i INPUT D Digital RGB/Component connector (HDMI) (accepts - Sony VPL-FX40L | Operating Instructions - Page 14
Instructions for Network (stored on the CD-ROM). d APA (Auto Pixel Alignment) key Automatically adjusts a picture to its clearest while a signal is input distortion of the image manually. When you press this to the CONTROL S IN jack on the projector with the connecting cable (not supplied) when - Sony VPL-FX40L | Operating Instructions - Page 15
Press again, or press the VOLUME+ key to restore the sound. n D ZOOM (Digital Zoom) +/- key This function is not provided in this projector. o ZOOM +/- keys Adjusts the picture size. p FOCUS +/- keys Adjusts the picture focus. q SHIFT +/- keys Adjusts the vertical/horizontal position of the picture - Sony VPL-FX40L | Operating Instructions - Page 16
Installing the Projector The following table gives an example of installing the standard lens supplied with VPL-FE40/ VPL-FX40. For details on installation, ceiling installation or when you use an optional lens, be sure to refer to the operating instructions of "Installation Manual for Dealers - Sony VPL-FX40L | Operating Instructions - Page 17
how to connect the projector to a computer. For more information, refer to the computer's instruction manual. to audio output projector accepts VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA signals. However, we recommend that you set the output mode of your computer to SXGA+ (VPL-FE40) or XGA (VPL-FX40 - Sony VPL-FX40L | Operating Instructions - Page 18
is not compatible with DSD (Direct Stream Digital) Signal. Connecting a VCR This section describes how to connect the projector to a VCR. For more information, refer to the instruction manuals of the equipment you are connecting. To connect to a video or S video output connector Side to DVI - Sony VPL-FX40L | Operating Instructions - Page 19
OFF ON INPUT A INPUT D INPUT B INPUT E INPUT C AIR SHOT VIDEO S VIDEO MENU APA ENTER 8 RESET FOCUS ZOOM SHIFT ASPECT KEY STONE 2 4 6,7,8 8 7 6 1 Plug the AC power cord into a wall outlet, then connect all equipment. The ON/STANDBY indicator lights in red and the projector goes into - Sony VPL-FX40L | Operating Instructions - Page 20
is effective for the input signal from a computer only. 5 Switch the equipment connected to output to the projector. Depending on the type of your computer, for example a notebook, or an all-in-one LCD type, you may have function. To adjust the focus of the picture, turn the lens ring. 20 Projecting - Sony VPL-FX40L | Operating Instructions - Page 21
Projecting the Picture To adjust the tilt of the installation surface If the projector is installed on an uneven surface, use the adjusters to keep the projector level. Turn to adjust Adjusters Notes • Be careful not to let the projector down on your fingers. • Do not push hard on the top of the - Sony VPL-FX40L | Operating Instructions - Page 22
A INPUT D INPUT B INPUT E INPUT C AIR SHOT VIDEO S VIDEO MENU APA ENTER RESET FOCUS ZOOM SHIFT ASPECT KEY STONE 2 3 4,5,6 1 Plug the AC power cord into a wall outlet. 2 Press the ?/1 key to turn on the projector. 30 5 Press the M or m key to select "Language," then press the , or ENTER - Sony VPL-FX40L | Operating Instructions - Page 23
if a key is not pressed for one minute. Security Lock The projector is equipped with a security lock function. When you turn the power of the projector on, you are required to input the previously set password. If you do not input the correct password, you will not be able to project the picture - Sony VPL-FX40L | Operating Instructions - Page 24
again to confirm. Security Lock Re-enter new password key. Note If you call the customer service center because you have forgotten the password, you will need to be able to verify the projector's serial number and your identity. (This process may differ in other countries/regions.) Once your - Sony VPL-FX40L | Operating Instructions - Page 25
certain time even after the power cord is removed. Note However, if the projector has been on for less than 15 minutes, the fan might not turn enough key is pressed. This function works when a signal from a computer is input. To restore the original screen, press the FREEZE key again. Controlling - Sony VPL-FX40L | Operating Instructions - Page 26
and Settings Using a Menu Using a MENU The projector is equipped with an on-screen menu for making Language" on page 22. Display items Input signal indicator Input signal indicator Shows the selected input channel. x is displayed when no signal is input. You can hide this indicator using "Status - Sony VPL-FX40L | Operating Instructions - Page 27
the screen. Unadjustable items The adjustable items are limited depending on the input signals. The items that cannot be adjusted or set do not are automatically stored in the projector memory when the ENTER key is pressed. If no signal is input If there is no input signal, "Cannot adjust this - Sony VPL-FX40L | Operating Instructions - Page 28
picture. Items that can be adjusted or set depend on the kind of input signals. For details, see "Input signals and adjustable/setting items" on page 38. When the video signal is input When the signal is input from a computer Setting items Picture Mode Reset Contrast Brightness Color Hue Color - Sony VPL-FX40L | Operating Instructions - Page 29
: Plays a video signal in an interlace format without converting. Black Level Produces a bolder, dynamic picture. Low Adj. (Adjust) Set according to the input signal source. • High: Gives higher emphasis to the black color. • Low: Gives lower emphasis to the black color. • Off: Cancels this - Sony VPL-FX40L | Operating Instructions - Page 30
original picture. • Full 2: Displays a picture on the whole of the screen. • Normal: Displays the picture while matching one pixel of input picture element to that of the LCD. The picture will be clear but the picture size will be smaller. Hides the outline of the picture. On • On: Hides the - Sony VPL-FX40L | Operating Instructions - Page 31
, "Full 1" and "Full 2" may become the same images. About the Preset Memory No. This projector has 41 types of preset data for input signals (the preset memory). When a preset signal is input, the projector automatically detects the signal type and recalls the data for the signal from the preset - Sony VPL-FX40L | Operating Instructions - Page 32
to "Low", the power consumption in standby is lowered. Sets the power saving mode. Off When set to "On", the projector goes into power saving mode if no signal is input for 10 minutes. At that time, the ON/STANDBY indicator lights in orange, then the screen becomes dark. In power saving - Sony VPL-FX40L | Operating Instructions - Page 33
the color system of the input signal automatically from among NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, or PAL60. • "NTSC3.58"-"PAL-N": Allows you to set the color system to the selected system manually. Auto Lamp Timer Reset When replacing the lamps, reset the lamp timer. - Notes • When - Sony VPL-FX40L | Operating Instructions - Page 34
this to "Off" when you want to select an input selector with no input signal, or you want to switch the setting manually. Displays the test pattern. Off When set to "On," a test pattern appears on the screen to be used when adjusting the lens with "Focus," "Zoom," and "Shift," or correcting the - Sony VPL-FX40L | Operating Instructions - Page 35
of Off the projector so that the projector can be operated projector on when it is in standby mode, and turns the projector projector's security lock function. Off When set to "On," turns on the security lock function, which locks the projector input signal. • Adjust the "Phase," "Pitch," - Sony VPL-FX40L | Operating Instructions - Page 36
the projector. Lamp Mode Standard ID Mode All Illumination Direct Power On Setting items V Keystone Image Flip Lamp Mode Lens Off vertically. Use this item for installation for the backside projection or ceiling installation. • HV: Flips the picture horizontally and vertically. • H: - Sony VPL-FX40L | Operating Instructions - Page 37
Illumination Selects whether the SONY logo on the rear panel of the On projector lights when the projector is on. Direct Power • Depending on the picture position adjusted with the lens shift feature, the aspect ratio of the picture may necessary on Input-E may not be displayed. Adjustments and Settings - Sony VPL-FX40L | Operating Instructions - Page 38
memory number of the input signal. Displays the type of the input signal. Indicates how long the lamp has been turned on (total usage). Notes • fH (horizontal frequency) and fV(vertical frequency) may not be displayed depending on the input signal used on the projector. • You cannot change the - Sony VPL-FX40L | Operating Instructions - Page 39
- z : Adjustable/can be set - : Not adjustable/cannot be set *4: VPL-FE40: Can be set except preset memory numbers 50 and 51. VPL-FX40: Can be set except preset memory numbers 37, 38, 39, 40, 45, 46, 50 and 51. *5: Except HDMI input. Adjustments and Settings Using a Menu The Information Menu 39 - Sony VPL-FX40L | Operating Instructions - Page 40
on conditions of use. Use an LMP-F270 Projector Lamp as the replacement lamp. Use of any other lamps than the LMP-F270 may cause damage to the projector. Caution The lamp remains hot after the projector is turned off with the ?/1 key. If you touch the lamp, you may burn your finger. When you replace - Sony VPL-FX40L | Operating Instructions - Page 41
slot to avoid electrical shock or fire. Note To erase a message, press any key on the control panel of the projector or on the Remote Commander. Disposal of the used lamp For the customers in the USA This product contains mercury. Disposal of this product may be regulated if sold in the - Sony VPL-FX40L | Operating Instructions - Page 42
lamp. Remove the air filter, and then remove the dust with a vacuum cleaner. The time needed to clean the air filter will vary depending on the environment or how the projector one. For details on new air filter, consult with qualified Sony personnnel. • Be sure to attach the air filter cover firmly - Sony VPL-FX40L | Operating Instructions - Page 43
B Others Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom Cause and Remedy The power is not turned on. • The power has - Sony VPL-FX40L | Operating Instructions - Page 44
" or "Component" correctly according to the input signal (see page 33). On-screen display lamp with a new one (see page 40). The picture is not clear. • The picture is out of focus. c Adjust the focus (see page 20). • Condensation has accumulated on the lens. c Leave the projector Troubleshooting - Sony VPL-FX40L | Operating Instructions - Page 45
is 25°C. Indicators Symptom Cause and Remedy The LAMP/COVER • The lamp cover or the air filter cover is detached. projector on again. If the ON/STANDBY flashes in red and the problem persists, the electrical system has failed. c Consult with qualified Sony personnel. Others Troubleshooting - Sony VPL-FX40L | Operating Instructions - Page 46
Message Meaning and Remedy High temp.! Lamp off in 1 The internal temperature is input signal cannot be projected as the frequency is out of the acceptable range of the projector. projector are locked. Operate the projector with the keys on the Remote Commander (see page 35). 46 Troubleshooting - Sony VPL-FX40L | Operating Instructions - Page 47
shutter system LCD panel VPL-FE40: 0.79-inch SXGA+ panel, 4,410,000 pixels (1400 × 1050 × 3) VPL-FX40: 0.79-inch XGA panel, 2,359,296 pixels (1024 × 768 × 3) Lens 1.3 times zoom lens (powered) f 30.6 to 39.7 mm/F1.66 to 2.18 * The lens is not supplied with the VPL-FE40L/FX40L. Lamp 275 - Sony VPL-FX40L | Operating Instructions - Page 48
/FX40) Lens hole cover (1) (VPL-FE40L/ FX40L) AC power cord (1) CD-ROM (Operating Instructions, Application Software) (1) Quick Reference Manual (1) Safety Regulations (1) Security Label (1) Design and specifications are subject to change without notice. Optional accessories Projector Lamp - Sony VPL-FX40L | Operating Instructions - Page 49
Some of the items may not be available in some areas. For details, please consult your nearest Sony dealer. Pin assignment INPUT A/B RGB connector (HD D-sub 15-pin, female) 1 R/R-Y 9 Power supply input for DDC 2 G/Y 10 GND 3 B/B-Y 11 GND 4 GND 12 DDC/SDA 5 GND 13 HD/C.Sync 6 GND - Sony VPL-FX40L | Operating Instructions - Page 50
, V-pos H-pos, V-pos H-pos, V-pos H-neg, V-neg SIZE - - - - - - - - - - - - 800 832 848 800 832 800 864 832 840 832 1024 1056 1040 1056 1048 1152 50 Specifications - Sony VPL-FX40L | Operating Instructions - Page 51
SIZE 1344 1328 1312 1376 1800 1728 1688 1688 1728 1864 2160 1664 1664 Note When a signal other than the preset signals shown above is input, the picture may not be displayed properly. Others Specifications 51 - Sony VPL-FX40L | Operating Instructions - Page 52
Warning on power connection Use the supplied power cord when you use the projector in your country/region. Otherwise, use a proper power cord meeting the following specifications. The United States, Canada Continental Europe Plug type VM0233 290B YP-12A Female end VM0089 386A YC-13B Cord - Sony VPL-FX40L | Operating Instructions - Page 53
19 5/8) 116 (4 5/8) (5/16) 7.6 71 (2 7/8) 13 (17/32) (4) 10 0 145 (5 3/4) 87.5 (3 1/2) 47.5 (1 7/8) 24.5 (31/32) Top 133 (5 1/4) 65.4 65.4 (2 5/8) (2 5/8) 133 (5 1/4) Center of the lens 500 (19 3/4) 27.5(1 1/8) Others 40 (1 5/8) 352 (13 7/8) 532 (21) Unit: mm (inches) Dimensions 53 - Sony VPL-FX40L | Operating Instructions - Page 54
.6 (1 11/16) 27 (11/8) 279 (11) 298 (11 3/4) 352 (13 7/8) 330 (13) 128 (5 1/8) 145 (5 3/4) 89 (3 1/2) 24.5 (31/32) 77 (3 1/32) 95 (3 3/4) 80 (3 1/4) Removable panel for lamp replacement Unit: mm (inches) 54 Dimensions - Sony VPL-FX40L | Operating Instructions - Page 55
Rear 71 (2 7/8) 120 (4 3/4) 10 (13/32) 40 (15/8) 40 90 (15/8) (3 5/8) 96 (3 7/8) 16.7 (11/16) 15 (19/32) 24.3 (31/32) 82 (3 1/4) 33.6 (1 3/8) Bottom 25 (1) 25 (1) Ventilation holes (Exhaust) Speakers 52.4 (21/16) 454.8 (18) 163 (6 1/2) 124 (5) 140 (5 1/2) 76.6 (3 1/8) 99 (4) - Sony VPL-FX40L | Operating Instructions - Page 56
28 I Illumination 37 Image Flip 36 Input-C Signal Sel 33 Installation 16 Installation examples unsuitable conditions 7 unsuitable installation 6 L Lamp Mode 36 Lamp replacement 40 Lamp Timer 38 Language 32 selecting the menu language 22 Lens 10 Location and function of controls connector - Sony VPL-FX40L | Operating Instructions - Page 57
controls .........14 rear remote control detector 11 Reset 28 resetting an item 27 S Screen size 16, 47 Security Lock 35 Sharpness 28 Smart APA 34 Specifications 47 Standby Mode 32 Status 32 Supplied accessories 48 T Troubleshooting 43 V V Keystone 36 Index 57 Others - Sony VPL-FX40L | Operating Instructions - Page 58
Sony Corporation
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
 |
 |
2-687-435-
13
(1)
Data Projector
Operating Instructions
VPL-FE40/FE40L
VPL-FX40/FX40L
© 2006 Sony Corporation