Sony ZS-X3CP Primary User Manual - Page 24
Specifications - dimensions
UPC - 027242594937
View all Sony ZS-X3CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 3.2-ohm loads, both channels driven from 150 - 10,000 Hz; rated 1.8 W per channelminimum RMS power, with no more than 10 % total harmonic distortion in AC operation. Other Specifications CD player section System Compact disc digital audio system Laser diode properties Material: GaAlAs Wave length: 780 nm Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Spindle speed 200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels 2 Frequency response 20 - 20 000 Hz +1/-2 dB Wow and flutter Below measurable limit Radio section Frequency range FM: 87.5 - 108 MHz AM: 530 - 1 710 kHz Antennas FM: Telescopic antenna AM: Built-in ferrite bar antenna General Speaker Full range: 10 cm (4 in.) dia., 3.2 Ω, cone type (2) Outputs Headphones jack (stereo minijack) For 16 - 68 Ω impedance headphones Power output 2.3 W + 2.3 W (at 3.2 Ω, 10 % harmonic distortion) Power requirements DC IN 9V jack accepts: Supplied AC power adaptor for use with 120 V AC, 60 Hz 9 V DC, 6 size D (R20) batteries Battery life For CD playback: Sony R20P: approx. 7.5 h Sony alkaline LR20: approx. 14 h Dimensions Approx. 430 × 172 × 287.5 mm (w/h/d) (17 × 6 7⁄8 × 11 3⁄8 inches) (incl. projecting parts) Mass Approx. 4.6 kg (7 lb. 11 oz) (incl. batteries) Supplied accessories AC power adaptor (1) Design and specifications are subject to change without notice. Optional accessories Sony MDR headphones series 24