Symphonic SC724FDF Owner's Manual
Symphonic SC724FDF Manual
 |
View all Symphonic SC724FDF manuals
Add to My Manuals
Save this manual to your list of manuals |
Symphonic SC724FDF manual content summary:
- Symphonic SC724FDF | Owner's Manual - Page 1
'S MANUAL COLOR TV/VCR/DVD TRIPLE COMBO SC724FDF (24 inch) INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional operating assistance after reading this owner's manual or to order replacement accessories, please call TOLL FREE : 1-800-242-7158. Or visit our WEB SITE at http://www.Symphonic.us - Symphonic SC724FDF | Owner's Manual - Page 2
is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. Power Sources - This unit should - Symphonic SC724FDF | Owner's Manual - Page 3
C SERVICE EQUIPMENT NEC - NATIONAL ELECTRICAL CODE S2898A GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CL AMPS POWER SERVICE GROUNDING ELECTRODE operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may - Symphonic SC724FDF | Owner's Manual - Page 4
expressly approved in the instruction manual. The user could TV technician for help. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS Model No. Serial No. -4- EN - Symphonic SC724FDF | Owner's Manual - Page 5
(in the TV/VCR mode). DVD-V : Description refers to playback of DVD video discs (in the DVD mode). CD : Description refers to playback of Audio CDs (in the DVD mode). QUICK : Description refers to the items to be set by the QUICK mode (in the DVD mode). SUPPLIED ACCESSORIES Remote Control Unit - Symphonic SC724FDF | Owner's Manual - Page 6
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) . .14 TV/VCR SECTION C TV OPERATION AND SETTINGS .15 WATCHING A TV PROGRAM . . .15 DEGAUSSING 15 PICTURE CONTROL 15 SLEEP TIMER 16 CLOSED CAPTION SYSTEM . . . .16 CHANNEL SET UP 17 CLOCK SET UP (AUTO / MANUAL 18 DAYLIGHT-SAVING TIME . . . . . .19 - Symphonic SC724FDF | Owner's Manual - Page 7
program at slower than normal speed. • Infrared remote control • Trilingual on screen TV/VCR setup display selectable in English, Spanish or French using timer recording.) • Smooth mode change - TV/VCR mode and DVD mode automatically changes without control. • 2 Step picture search operation - You - Symphonic SC724FDF | Owner's Manual - Page 8
if the loaded disc is DVD or Audio CD. ¡On-screen display Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control. ¡Search Chapter search / Title search - Symphonic SC724FDF | Owner's Manual - Page 9
16 17 18 19 20 21 - REMOTE CONTROL - [Fig. 2] 1 22 23 24 25 26 (DVD) 3 (TV/VCR) 14 4 13 27 28 29 TV/VCR P.30] Hit to start manual recording. Hit repeatedly to start One Touch Recording. RECORD Button (Remote Control) [TV/VCR P.29] Hit to start manual recording. 14. E REW Button (for TV/VCR) [TV/VCR - Symphonic SC724FDF | Owner's Manual - Page 10
- Hit to enter the desired numbers which are higher than 9. 24. PAUSE F Button [TV/VCR P.25 / DVD P.37] Pauses the current disc or tape operation. 25. SPEED Button [TV/VCR P.29] Hit to choose the desired recording speed: SP/SLP. 26. C.RESET Button [TV/VCR P.27] Hit to reset counter to "0:00:00". Hit - Symphonic SC724FDF | Owner's Manual - Page 11
. 44. SLEEP Button [TV/VCR P.16] Sets the Sleep DVD Audio only). NOTE: • We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code - Symphonic SC724FDF | Owner's Manual - Page 12
From Cable System [Fig. 4] *Some cable TV systems use scrambled signals and require a special /DESCRAMBLER BOX OR SATELLITE BOX If your cable service supplies you with a converter box or if This means that channels cannot be changed using the remote control of this unit. NOTE: • For your safety - Symphonic SC724FDF | Owner's Manual - Page 13
L CHANNEL K REC/OTR E REW B PLAY F.FWD D C STOP A EJECT DVD TV/VCR HEADPHONE VIDEO L - AUDIO - R To the Audio output jacks Audio Cable (commercially the system before connecting another component. • Refer to the Owner's Manuals for the components to be connected to the unit. • Set "DOLBY - Symphonic SC724FDF | Owner's Manual - Page 14
(right) Subwoofer (IN) To AUDIO OUT COAXIAL jack (Only DVD AUDIO OUT) Audio coaxial digital cable (commercially available) [Fig. all components in the system before connecting another component. • Refer to the Owner's Manuals for the components to be connected to the unit. • If connected to a - Symphonic SC724FDF | Owner's Manual - Page 15
in the DVD mode, you can change the TV channels. Even if you turn off the unit in the DVD mode, when you turn it on again, it will go into the TV/VCR mode. time the TV screen is accidentally magnetized or when the TV is moved or relocated. PICTURE CONTROL TV/VCR The unit's picture controls - BRIGHT - Symphonic SC724FDF | Owner's Manual - Page 16
the menu. NOTE: • Even if there is a power failure of any kind, the unit will retain its memory for this feature. TV/VCR You can view specially labeled (cc) TV programs, movies, news and pre-recorded tapes with either a dialogue caption or text display. CAPTION mode: You can watch dramas, movies - Symphonic SC724FDF | Owner's Manual - Page 17
only available channels into the memory. 1 Select "CHANNEL SET UP" Hit [SETUP]. Press [K / L] to point to "CHANNEL SET UP", then hit [ENTER]. - TV/VCR SETUP - TIMER PROGRAMMING SETTING CLOCK B CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX - Symphonic SC724FDF | Owner's Manual - Page 18
CLOCK SET UP (AUTO / MANUAL) TV/VCR The unit clock must be set correctly so that VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the unit, then set to [ON] the auto clock setting which will periodically correct the setting if necessary. NOTE: • - Symphonic SC724FDF | Owner's Manual - Page 19
box is being used, make sure it is powered on. • You must use the remote control to perform the clock setting procedure. • If the unit is connected directly to a Manual Clock Setting on page 18. NOTE: • During AUTO CLOCK CH SEARCH, the picture may be distorted. DAYLIGHT-SAVING TIME TV/VCR Select - Symphonic SC724FDF | Owner's Manual - Page 20
[K / L] to select "V-CHIP SET UP", then hit [ENTER]. - TV/VCR SETUP - TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP B V-CHIP enter the default code of 0000. ACCESS CODE _ _ _ _ 3 Select the desired item Press [K / L] to select "TV RATING", "MPAA RATING" or "CHANGE CODE", then hit [ - Symphonic SC724FDF | Owner's Manual - Page 21
. MENU LANGUAGE TV/VCR 1 Select "LANGUAGE" Hit [SETUP]. Press [K / L] to point to "LANGUAGE". - TV/VCR SETUP - TIMER code NEW CODE Press the Number buttons to enter X X X X your desired access code in the "NEW CODE" space, then enter CONFIRM CODE _ _ __ the same code in the "CONFIRM CODE - Symphonic SC724FDF | Owner's Manual - Page 22
while the unit is set in "HIFI", "HIFI" will disappear from the TV screen and the unit will play automatically in monaural. MTS RECORDING/MONITOR MODE TV/VCR Type of broadcast Display on the TV screen Regular -None- (monaural audio) Stereo broadcast STEREO Bilingual broadcast SAP STEREO - Symphonic SC724FDF | Owner's Manual - Page 23
Hit [AUDIO] repeatedly to select the MTS output mode. • The output mode changes as described below every time you hit the button. STEREO SAP MONO TV/VCR WHEN IN THE EXTERNAL INPUT MODE ("AUX") Hitting [AUDIO] does not affect the audio output mode and the current audio output mode does not appear - Symphonic SC724FDF | Owner's Manual - Page 24
back edge of the cassette. Tab If you decide to record on the tape again, cover the hole with plastic tape. Plastic Tape NOTE: • In DVD mode, whether the cassette is with tab or without tab you insert, it doesn't start playing until you hit [B PLAY]. In - Symphonic SC724FDF | Owner's Manual - Page 25
DVD mode, you can start the VCR playback if you hit [B PLAY] (of the TV/VCR side). • VCR playback will stop and the mode will change to the DVD mode by pressing [SELECT], [B PLAY] (DVD side) or [A OPEN/CLOSE]. TRACKING ADJUSTMENT TV/VCR stop mode. VERTICAL HOLD CONTROL TV/VCR In the pause/still mode - Symphonic SC724FDF | Owner's Manual - Page 26
back worn cassettes such as rented tapes. 1 Select "USER'S SET UP" Hit [SETUP]. Press [K / L] to point to "USER'S SET UP", then hit [ENTER]. - TV/VCR SETUP - TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP B USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX - Symphonic SC724FDF | Owner's Manual - Page 27
" Hit [SETUP]. Press [K / L] to point to "ZERO RETURN", then hit [ENTER]. The unit will begin rewinding and the counter will appear on the TV - TV/VCR SETUP - TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] B ZERO RETURN TIME SEARCH INDEX - Symphonic SC724FDF | Owner's Manual - Page 28
tape or blank portions on the tape.) The "-" indication will appear when the tape has rewound further than "0:00:00" on the tape counter. TV/VCR • When the end of a tape is reached during record- ing, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding - Symphonic SC724FDF | Owner's Manual - Page 29
: • This unit will ONLY record and view the same channel. • This unit cannot record the contents from the built-in DVD. NORMAL RECORDING TV/VCR You can ONLY watch the same TV program that is being recorded. 1 Select the channel to be recorded Press the Number buttons or [CH. K / L]. CH 10 NOTE - Symphonic SC724FDF | Owner's Manual - Page 30
recording mode. • To stop the OTR operation, hit [C STOP] on the unit or on the remote control. • To show the remaining time, hit [DISPLAY] on the remote control so that "OTR" appears on the TV screen. (It will show up momentarily then dis- appear.) • Recording stops when the display shows 0:00 - Symphonic SC724FDF | Owner's Manual - Page 31
hit [ENTER]. • If you have not yet set the clock, - TV/VCR SETUP - B TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH "MANUAL - Symphonic SC724FDF | Owner's Manual - Page 32
begins. To watch the currently recorded TV program or to play a DVD disc, hit [POWER] and [SELECT] to choose the TV/VCR mode or the DVD mode. • If the tape runs If you want to cancel while setting, hit [PAUSE F] on the remote control. The recording time returns to the original time. NOTE: • When you - Symphonic SC724FDF | Owner's Manual - Page 33
program(s) can be searched for automatically. 1 Select "USER'S SET UP" Hit [SETUP]. Press [K / L] to point to "USER'S SET UP", then hit [ENTER]. - TV/VCR SETUP - TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP B USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH - Symphonic SC724FDF | Owner's Manual - Page 34
37 38 39 40 41 42 43 44 45 CATV channel W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24 TV Display 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 CATV channel W+25 W+26 W+27 W+28 W+29 W+30 W+31 - Symphonic SC724FDF | Owner's Manual - Page 35
case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder. *8: Only the discs recorded in the video , malfunction may result! DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal computers - Symphonic SC724FDF | Owner's Manual - Page 36
are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. DISC MENU DVD-V 4 Hit [PLAY O]. ¡The tray will close automatically and playback will then start from the first chapter or track of the disc. ¡Closing the disc tray manually or by hitting - Symphonic SC724FDF | Owner's Manual - Page 37
C]. ¡Resume message will appear on the TV screen. 2 Hit [PLAY O], playback will resume from the point at which playback was stopped. ¡To cancel resume, hit [STOP C] twice. ¡The resume information stays on even when the power is turned off. PAUSE DVD-V CD 1 During playback, hit [PAUSE F]. ¡Playback - Symphonic SC724FDF | Owner's Manual - Page 38
display. 3 When you reach the desired point, hit [ENTER]. ¡The Title or Track and elapsed playing time will appear in the TV screen. TITLE / CHAPTER SEARCH DVD-V 1 Hit [SEARCH MODE] once for the Chapter search, twice for the Title search during playback. _/2 2 Enter the desired chapter/title number - Symphonic SC724FDF | Owner's Manual - Page 39
[A-B] again at your chosen end point. ¡" A-B" appears briefly on the TV screen, and the repeat sequence begins. 3 To exit the sequence, hit [A-B]. NOTES: ¡The A-B repeat section can only be set within the cur- rent title (for DVDs) or current track (for Audio CDs). ¡A-B repeat is not available with - Symphonic SC724FDF | Owner's Manual - Page 40
on some DVDs with multiple subtitle languages. In this case, set it on the disc menu. (Operation varies between discs. Refer to the manual of the TV screen, it NOT AVAILABLE means no subtitle is recorded on the scene. ¡If you choose a language that has a 3 letter lan- guage code, the code - Symphonic SC724FDF | Owner's Manual - Page 41
icon appears on the screen. 1 Hit [ANGLE] during playback. ¡The selected angle will be displayed on the display bar at the top of the screen. 1 / 8 DVD-V CD You can enjoy surround-sound effect over two speakers on this unit. 1 Hit [MODE] twice (CD: once) during play- back. OFF 2 Hit [ENTER] to - Symphonic SC724FDF | Owner's Manual - Page 42
THE ON-SCREEN INFORMATION You can check the information about the current disc by hitting [DISPLAY]. DVD-V CD For DVD-Vs 1 Hit [DISPLAY] during playback to show cur- rent Chapter. ¡The elapsed and remaining playing time of the current 9/49 0:00:00 -0:03:30 chapter - Symphonic SC724FDF | Owner's Manual - Page 43
ORIGINAL OFF ENGLISH Sets the subtitle language. DISC MENU: Sets the language for DVD menu. 4 Press [K / L] to select a setting then hit [ENTER number to enter the code for the desired language. (Refer to the language code list.) ¡Only the languages support- SETUP LANGUAGE SUBTITLE OFF - Symphonic SC724FDF | Owner's Manual - Page 44
[K / L] to select the below items then hit [ENTER]. DRC (Dynamic Range Control): ¡To compress the range of soft to loud sound. ¡The default setting is SETTING FOR THE ON-SCREEN MENUS ¡You can access the TV/VCR SETUP menu by hitting [SETUP] from the DVD mode. Refer to "MENU LANGUAGE" on page 21 to - Symphonic SC724FDF | Owner's Manual - Page 45
in the stop mode so that the "INITIALIZE" menu appears. 2 Press [K / L] to select "INITIALIZE" then hit [ENTER]. SETUP QUICK CUSTOM INITIALIZE CONTROL LEVELS ¡ALL All parental lock is cancelled. ¡Level 8 DVD software of any grade (adult/general/children) can be played back. ¡Levels 7 to 2 Only - Symphonic SC724FDF | Owner's Manual - Page 46
TROUBLESHOOTING GUIDE If the unit does not perform properly when operated as instructed in this Owner's Manual, check the unit, consulting the following checklist. PROBLEM No power No operation by infrared remote control CORRECTIVE ACTION • Make sure the power plug is connected to an AC outlet. • - Symphonic SC724FDF | Owner's Manual - Page 47
the audio is OK in playback No operation by infrared remote control Video or color fades in and out when making a copy of a video tape Different color marks on screen CORRECTIVE ACTION • Try a new channel, if OK, then possible station trouble. • Check for local interference. • Make sure the timer - Symphonic SC724FDF | Owner's Manual - Page 48
plays on this unit. • Hit [SELECT] to select DVD mode, then try other DVD feature. Disc cannot be played • Insert the disc. • Clean the disc. • Place the disc correctly, with the label side up. • Cancel the parental lock or change the control level. No sound • Connect the audio cables firmly - Symphonic SC724FDF | Owner's Manual - Page 49
TV Service Center. NOTES: • Remember to read the instructions included with the video head cleaner before use. • Clean video heads only when problems occur. SERVICING TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service - Symphonic SC724FDF | Owner's Manual - Page 50
84 DVD Product type: DVD Player Discs: DVD video, Audio CD Output signal format: NTSC color ELECTRICAL SPECIFICATIONS Sound output: 2 speakers, 1W, 8 ohm OTHER SPECIFICATIONS Terminals Antenna input: Video input: Audio L/R input: Headphone: Coaxial digital audio output: Remote control - Symphonic SC724FDF | Owner's Manual - Page 51
DOLBY DIGITAL (para DVD 53 13. Botón REC/OTR (Panel frontal) Presione para empezar la grabación manual. Presione repetidamente para empezar la grabación instantánea (OTR). Botón RECORD (Mando a distancia) Presione para empezar la grabación manual. 14. Botón E REW (para TV/VCR) Presione para - Symphonic SC724FDF | Owner's Manual - Page 52
32. Botón SEARCH MODE Presione para localizar un punto deseado. 33. Botón AUDIO Modo TV/VCR: Presione para seleccionar el modo de sonido deseado cuando vea un programa de TV o reproduzca o grabe un casete. Modo DVD: Presione para seleccionar un modo de sonido o idioma de audio deseado. 34. Botón - Symphonic SC724FDF | Owner's Manual - Page 53
la página 13 Si utiliza esta unidad para reproducir un disco DVD grabado en formato de sonido envolvente Dolby Digital de 5,1 canales, la todos los componentes del sistema antes de conectar otro componente. • Consulte los manuales de instrucciones de los componentes que va a conectar a la unidad. - Symphonic SC724FDF | Owner's Manual - Page 54
L] en el modo DVD, puede cambiar los canales de TV. Incluso si apaga la unidad en el modo DVD, cuando vuelva a encender, volverá al modo TV/VCR. PARA VER CANALES el idioma deseado y presione [SETUP]. AJUSTE DEL RELOJ TV/VCR AJUSTE MANUAL DEL RELOJ Asegúrese ... • La unidad debe estar encendida - Symphonic SC724FDF | Owner's Manual - Page 55
característica para sincronizar el reloj con la hora real. GRABACIÓN GRABACIÓN NORMAL TV/VCR SOLO puede ver el mismo programa que se está grabando. 1 Seleccione el ón no comienza automáticamente, presione [PLAY O]. ¡Cuando reproduzca un DVD que tenga grabado un menú de títulos, el menú podrá - Symphonic SC724FDF | Owner's Manual - Page 56
MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP. AND ITS REPRESENTATIVES FUNAI CORPORATION, INC. SERVICE CENTER 19900 Van Ness Avenue, Torrance, CA 90501 Tel :1-800-242-7158 http://www.Symphonic.us Head Office: 100
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
 |
 |
COLOR TV/VCR/DVD TRIPLE COMBO
SC724FDF
(24 inch)
OWNER’S
MANUAL
If you need additional operating assistance after reading this owner’s
manual or to order replacement accessories, please call
TOLL FREE : 1-800-242-7158.
Or visit our
WEB SITE
at
Please read before using this equipment
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.