TASCAM CD-400U Update procedures

TASCAM CD-400U Manual

Get TASCAM CD-400U PDF manuals and user guides View all TASCAM CD-400U manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM CD-400U manual content summary:

  • TASCAM CD-400U | Update procedures - Page 1
    CD-400U / CD-400U DAB you are using. 1. Press POWER button to turn the unit on. Wait until the start-up logo will be disappeared and function (CD and so on) will be shown on the top left of the display. The MCU version will be shown on the display. Information MCU ver 1.01 TASCAM CD-400U [Start
  • TASCAM CD-400U | Update procedures - Page 2
    CD-400U / CD-400U DAB The firmware update will be finished, following message will be shown. Complete! Please Power Off REC firmware update 1. Download the button to turn the unit off. 9. Unplug the USB flash. Press the POWER button to turn the unit on if needed. 2 TASCAM CD-400U / CD-400U DAB
  • 1
  • 2
TASCAM
CD-400U / CD-400U DAB
1
CD-400U / CD-400U DAB
Checking the firmware version
Before starting firmware update procedures, check the firmware version of the CD-400U / CD-400U DAB you are using.
1.
Press
POWER
button to turn the unit on.
Wait until the start-up logo will be disappeared and func-
tion (CD and so on) will be shown on the top left of the dis-
play.
CD-400U
TASCAM
[Start-up logo]
No Disc
CD
[CD function]
2.
Press the main unit
HOME/MENU
button or remote control
MENU
button to open the Menu screen.
< APS Setting
>
Menu
[Menu-APS Setting]
3.
Select
Information
by turning the main unit
MULTI JOG
dial or using the remote control
.
/
/
[
l
]/[
;
] buttons
and press the main unit
MULTI JOG
dial or remote control
ENTER
button
The MCU version will be shown on the display.
MCU ver 1.01
Information
4.
Turn the main unit
MULTI JOG
dial clockwise or using the
remote control
/
[
;
] buttons to show SUB version.
SUB ver 0.31
Information
5.
Turn the main unit
MULTI JOG
dial clockwise or using the
remote control
/
[
;
] buttons to show REC version.
REC ver 0.10
Information
6.
Press the main unit
MULTI JOG
dial or remote control
EN-
TER
button to return to the Menu screen.
< Information
>
Menu
7.
Press the main unit
BACK [PAIRING]
button or remote con-
trol [
k
] button to return to the Home Screen.
Firmware update procedures (USB flash drive only)
ATTENTION
The firmware of CD-400U / CD-400U DAB can be updated using with USB flash.
While updating, do not turn the power OFF.
Doing so could damage the firmware, making further updating and ordinary operation impossible.
Main firmware (MCU and SUB) update
1.
Download the latest firmware from the TEAC Global Site
(
http://teac-global.com/
).
Decompress the downloaded file if it is in ZIP format or an-
other compressed file type.
2.
Copy the file of the firmware onto the root folder of an USB
flash. (Never change the file name.)
3.
Press the
POWER
button to turn the unit off if it’s on.
4.
Plug the USB flash to the USB connector on the front panel.
5.
Press the
POWER
button to turn the unit on.
The Start-up display will be shown.
CD-400U
TASCAM
Then current version will be shown for a few seconds.
CrrVer 1.01 0031
Update Mode
Version Up
will be shown.
>OK< CANCEL
Version Up
6.
Select
OK
by turning the main unit
MULTI JOG
dial or using
the remote control
.
/
/
[
l
]/[
;
] buttons and press the
main unit
MULTI JOG
dial or remote control
ENTER
button.
Current version and the version to be updated will be
shown.
Push Play
V.1.01 >> V.1.02
7.
Press
7
(
PLAY
) button to start update process.
Don't Power Off
Updating Host
ATTENTION
Never disconnect the power cable during above message is
shown or the firmware is miswritten and the unit cannot start
up.
0618.MA-2618A