TASCAM CD-RW901MKII S-232C documentation
TASCAM CD-RW901MKII Manual
View all TASCAM CD-RW901MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
TASCAM CD-RW901MKII manual content summary:
- TASCAM CD-RW901MKII | S-232C documentation - Page 1
TASCAM CD-RW901MKⅡ CONTROL I/O connector RS-232C Protocol Specification Ver.1.00 December 2014 TEAC Corporation - TASCAM CD-RW901MKII | S-232C documentation - Page 2
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification 1. Overview The CD-RW901MKⅡ's REMOTE connector can be used to control the CD-RW901MKⅡ from a computer or other external device. In this document, the CD RS-422A used in professional VTR units) Impedance at Data speed (baud rate) 4800/9600/19200 - TASCAM CD-RW901MKII | S-232C documentation - Page 3
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification RXD 2 TXD 3 RTS 7 CTS 8 GND 5 Controlled device (CD-RW901 MKⅡ) RXD TXD RTS CTS GND External controller 2 TEAC Corporation - TASCAM CD-RW901MKII | S-232C documentation - Page 4
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification 3. Command format Command format overview The command t CR HEX 0Ah 30h 32h 39h 32h 33h 30h 30h 54h 65h 73h 74h 0Dh Machine ID The CD-RW901 MKⅡ uses Machine ID=0 to receive commands and transmit returns. Commands and returns using Machine ID=0 - TASCAM CD-RW901MKII | S-232C documentation - Page 5
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification List of commands A list of commands is given below. Control/Preset/Sense Command 0F INFORMATION REQUEST 10 STOP 12 PLAY 13 RECORD 14 READY 16 SHUTTLE 18 TRAY 1A TRACK/INDEX SKIP 1D CALL 20 AUTO CUE LEVEL PRESET 21 AUTO TRACK LEVEL PRESET 23 DIRECT - TASCAM CD-RW901MKII | S-232C documentation - Page 6
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification 78 ERROR SENSE 79 CAUTION SENSE F0 ERROR SENSE REQUEST F1 CAUTION SENSE REQUEST F2 ILLEGAL STATUS F4 POWER ON STATUS F6 CHANGE STATUS F8 ERROR SENSE RETURN F9 CAUTION SENSE RETURN 5 TEAC Corporation - TASCAM CD-RW901MKII | S-232C documentation - Page 7
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification Command sequence In most cases the be determined. This example shows how to check the record-ready status of the controlled device and then initiate recording.. External controller Command Controlled device State of controlled device Stopped - TASCAM CD-RW901MKII | S-232C documentation - Page 8
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification MECHA STATUS SENSE RECORD (Record) - TASCAM CD-RW901MKII | S-232C documentation - Page 9
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification READY Puts the controlled device in PLAY-READY mode or RECORD-READY mode. Command 14 Machine ID 0 Data 2 bytes Data 1 Data 2 Description Remarks 0 0 invalid The command will be ignored in the case of this data. ILLEGAL - TASCAM CD-RW901MKII | S-232C documentation - Page 10
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification SHUTTLE Puts the controlled device in SHUTTLE transmit ILLEGAL [F2]. Return none TRAY Opens or closes the tray of the controlled device (CD-RW901MKⅡ). Command 18 Machine ID 0 Data none Return none SKIP Causes the controlled device to - TASCAM CD-RW901MKII | S-232C documentation - Page 11
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification AUTO CUE LEVEL PRESET Sets the Auto Cue Level of the controlled device. A return command is returned only if Sense [ - TASCAM CD-RW901MKII | S-232C documentation - Page 12
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification DIRECT TRACK SEARCH PRESET units. The adjustable range is ±16.0%. This can be set independently of the step that is specified by the CD-RW901 MKⅡ's PITCH STEP? setting. A return command is returned only if Sense [FF] is specified.. If Sense - TASCAM CD-RW901MKII | S-232C documentation - Page 13
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification Data 1 Data 2 Description Remarks N1 N2 Minutes N1: Tens digit of minutes, N2: Ones digit of minutes F F Sense Requests that - TASCAM CD-RW901MKII | S-232C documentation - Page 14
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification SYNC REC LEVEL PRESET Sets the Sync Rec Level of the controlled device. A return command is returned only if Sense [ - TASCAM CD-RW901MKII | S-232C documentation - Page 15
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification TIME SEARCH PRESET Searches for the specified track number and time. If this command is received while in STOP mode - TASCAM CD-RW901MKII | S-232C documentation - Page 16
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification FADE IN/OUT TIME PRESET Specifies the fade-in/out time used for the fade-in/out recording function of the controlled device. A range of 1 to 30 seconds can be specified. A return command is returned only if Sense [FF] is specified. If Sense [ - TASCAM CD-RW901MKII | S-232C documentation - Page 17
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification ・ If data other than the above is received, the controlled device will transmit ILLEGAL [F2]. Return AUTO CUE SELECT RETURN [B0] 16 TEAC Corporation - TASCAM CD-RW901MKII | S-232C documentation - Page 18
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification AUTO TRACK SELECT Specifies the auto track mode of the controlled device. A return command is returned only if Sense [FF] - TASCAM CD-RW901MKII | S-232C documentation - Page 19
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification PITCH CONTROL SELECT Specifies the Pitch Control mode of the controlled device. A return command is returned only if Sens [FF] - TASCAM CD-RW901MKII | S-232C documentation - Page 20
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification SYNC REC SELECT Specifies the Sync Rec Mode setting of the controlled device. A return command is returned only if Sense [ - TASCAM CD-RW901MKII | S-232C documentation - Page 21
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification REMOTE/LOCAL SELECT Enables or disables key operations on the controlled device's own panel. A return command is returned only if - TASCAM CD-RW901MKII | S-232C documentation - Page 22
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification CURRENT TRACK INFORMATION SENSE Requests that information for the current track be returned. Command 57 Machine ID 0 Data none Return - TASCAM CD-RW901MKII | S-232C documentation - Page 23
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification Command Machine ID Data Return 5E 0 none PGM TOTAL TRACK No./TOTAL TIME RETURN [DE] 22 TEAC Corporation - TASCAM CD-RW901MKII | S-232C documentation - Page 24
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification KEYBOARD TYPE SENSE Requests the type of PS/2 keyboard connected to the controlled device. Command 5F Machine ID 0 Data none - TASCAM CD-RW901MKII | S-232C documentation - Page 25
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification INFORMATION RETURN This is the return command in response to the command "INFORMATION REQUEST [0F]." It returns the software version - TASCAM CD-RW901MKII | S-232C documentation - Page 26
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification PITCH CONTROL DATA RETURN This is the return command in response to the command "PITCH CONTROL DATA PRESET [25]." It - TASCAM CD-RW901MKII | S-232C documentation - Page 27
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification KEY CONTROL DATA RETURN This is the return command in response to the command "KEY CONTROL DATA PRESET [2D]." It - TASCAM CD-RW901MKII | S-232C documentation - Page 28
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification AUTO TRACK SELECT RETURN This is the return command in response to the command "AUTO TRACK SELECT [31]." It returns - TASCAM CD-RW901MKII | S-232C documentation - Page 29
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification Request/Preset PITCH CONTROL SELECT [35] 28 TEAC Corporation - TASCAM CD-RW901MKII | S-232C documentation - Page 30
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification AUTO READY SELECT RETURN This is the return command for the command "AUTO READY SELECT [36]." It returns the Auto - TASCAM CD-RW901MKII | S-232C documentation - Page 31
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification KEY CONTROL SELECT RETURN This is the return command for the command "KEY CONTROL SELECT [3D]." It returns the Key - TASCAM CD-RW901MKII | S-232C documentation - Page 32
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification MECHA STATUS RETURN This is the -ready mode 8 0 Monitor Input monitor status (no disc is inserted) 8 1 Record Recording 8 2 Record Ready Record-ready mode 8 3 TOC Writing Writing the TOC / Erasing or Finalizing Request/Preset MECHA - TASCAM CD-RW901MKII | S-232C documentation - Page 33
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification DISC STATUS RETURN This is the Status 00:Disc not present 01:Disc present Data 3 00:CD-DA 01:CD-R (Audio) Data 4 Disc Type 02:CD-RW (Audio) 10:CD-Data (MP3 CD) 11:CD-R (Data) 12:CD-RW (Data) Request/Preset DISC STATUS SENSE [56] CURRENT - TASCAM CD-RW901MKII | S-232C documentation - Page 34
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification CURRENT TRACK TIME RETURN This is the return command for the command "CURRENT TRACK TIME SENSE [58]." It returns the - TASCAM CD-RW901MKII | S-232C documentation - Page 35
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification TOTAL TRACK No./TOTAL TIME RETURN This is the return command for the command "TOTAL TRACK No./TOTAL TIME SENSE [ - TASCAM CD-RW901MKII | S-232C documentation - Page 36
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification Data 5 Data 6 Data 7 Data 8 Data 9 Data 10 Data 11 Data 12 Request/Preset Tens digit of the minutes Ones digit - TASCAM CD-RW901MKII | S-232C documentation - Page 37
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification POWER ON STATUS This command indicates that the controlled device has been powered-on. Command F4 Machine ID 0 Data none - TASCAM CD-RW901MKII | S-232C documentation - Page 38
TASCAM CD-RW901MKⅡ RS-232C Protocol Specification ERROR SENSE RETURN This is the return command for the command "ERROR SENSE [78]." It returns an error code. Command
TASCAM CD-RW901MK
Ⅱ
CONTROL I/O connector
RS-232C Protocol Specification
Ver.1.00
December 2014
TEAC Corporation