TASCAM CG-2000 Owners Manual

TASCAM CG-2000 Manual

Get TASCAM CG-2000 PDF manuals and user guides View all TASCAM CG-2000 manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM CG-2000 manual content summary:

  • TASCAM CG-2000 | Owners Manual - Page 1
    D01221520A CG-2000 Master Clock Generator OWNER'S MANUAL
  • TASCAM CG-2000 | Owners Manual - Page 2
    dafür aufzukommen. DECLARATION OF CONFORMITY We, TEAC EUROPE GmbH. Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany declare in own responsibility, the TEAC product described in this manual is in compliance with the corresponding technical standards. 2 TASCAM CG-2000
  • TASCAM CG-2000 | Owners Manual - Page 3
    block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as hearing loss. • If you are experiencing problems with this product, contact TEAC for a service referral. Do not use the product until - lation. TASCAM CG-2000 3
  • TASCAM CG-2000 | Owners Manual - Page 4
    equipment, please contact your city office, waste disposal service or the shop where you purchased the equipment. 88 For China 2000m 机种 ：CG-2000 铅 品名 (Pb) 1 CHASSIS 部份 ○ 2 FRONT PANEL 部份 ○ 3 ○ 4 ○ 5 PCB Assy 部份 × 6 ○ 7 × 8 LABEL 部份 ○ 9 ○ 汞 (Hg
  • TASCAM CG-2000 | Owners Manual - Page 5
    Contents 1 - Introduction 6 Features 6 Included items 6 Conventions used in this manual 6 Trademarks 6 Precautions for placement 7 Power supplies 7 Condensation 7 Cleaning the unit 7 USB flash drives and outputs 29 Performance 29 General 30 Dimensional drawings 30 TASCAM CG-2000 5
  • TASCAM CG-2000 | Owners Manual - Page 6
    very much for purchasing a TASCAM CG-2000 Master Clock Generator. Before using this unit, please read this manual thoroughly to ensure you problems when they occur • Self-calibration function using an external oscillator (atomic/GPS 10MHz, GPS PPS)* • Word clock up to 192 kHz supported • Supports
  • TASCAM CG-2000 | Owners Manual - Page 7
    the product name in the "Search by Model Name" section to open the Downloads page for that product. 4. Select and download the Owner's Manual that are needed. User registration Customers in the USA, please visit the TASCAM website (http:// tascam.com/) to register as a user online. TASCAM CG-2000 7
  • TASCAM CG-2000 | Owners Manual - Page 8
    to show the status of the unit on the display. Lit red: Indicates trouble. Press the INFO button to show information about the error on the display. dial to adjust the brightness of the display and the various indicators. 8 TASCAM CG-2000 7 MULTI JOG dial This dial also functions as a button. Dial
  • TASCAM CG-2000 | Owners Manual - Page 9
    A/B connectors Connect the included power cords here. To operate this unit with power redundancy, connect power to both the AC IN A and AC IN B connectors. TASCAM CG-2000 9
  • TASCAM CG-2000 | Owners Manual - Page 10
    . When blue, press it to show information about the current operation status on the display. Red When trouble occurs with the unit, the INFO button indicator lights red. When red, press it to show information is on, this shows the selection status of the secondary reference clock. 10 TASCAM CG-2000
  • TASCAM CG-2000 | Owners Manual - Page 11
    one item per line. Example of current error display 88 Display of errors that occurred previously Trouble that occurred previously is shown one item per page. When an error is being shown, press *This only appears on the second page or later pages of the ERROR INFORMATION screen. TASCAM CG-2000 11
  • TASCAM CG-2000 | Owners Manual - Page 12
    27 page 24 ERROR LOG View error logs - NOTE For details about the factory default settings, see "Default setting values list" on page 28. 12 TASCAM CG-2000
  • TASCAM CG-2000 | Owners Manual - Page 13
    HOME/DISPLAY button to return to the Home Screen. NOTE Press the EXIT/CANCEL button to cancel a menu operation and return to the menu screen. TASCAM CG-2000 13
  • TASCAM CG-2000 | Owners Manual - Page 14
    example of connections. Precautions before making connections • Before making connections, read the operation manuals of the other devices carefully and connect them correctly. • Turn all devices being video recorder, digital mixer, etc. GPS receiver ALARM IN External indicator 14 TASCAM CG-2000
  • TASCAM CG-2000 | Owners Manual - Page 15
    the MULTI JOG dial to change the value. Then press the MULTI JOG dial to confirm it and move the cursor to the next item. TASCAM CG-2000 15
  • TASCAM CG-2000 | Owners Manual - Page 16
    reference clocks. 1. Press the MENU button to open the REFERENCE menu page, and turn the MULTI JOG dial to select the FORCE RELOCK item. 16 TASCAM CG-2000
  • TASCAM CG-2000 | Owners Manual - Page 17
    audio clock frequency setting on or off. Options: OFF (default), ON 4. Press the MULTI JOG dial to confirm the selection and return to the menu. TASCAM CG-2000 17
  • TASCAM CG-2000 | Owners Manual - Page 18
    menu page, and turn the MULTI JOG dial to select the S/PDIF item. 2. Press the MULTI JOG dial to open the S/PDIF FORMAT screen. 18 TASCAM CG-2000 3. Turn the MULTI JOG dial to set the output format for the S/ PDIF 1/2 OUTPUTS (RCA pin jacks). Options: AES3, S/PDIF (default) 4. Press the MULTI JOG
  • TASCAM CG-2000 | Owners Manual - Page 19
    two inputs each for video reference and word clock signals, and it supports redundancy in order to prevent problems caused by external clock interruptions. Furthermore, if both reference clocks are ✓: ENABLED -: DISABLED 1: Switches to primary reference clock, which has priority. TASCAM CG-2000 19
  • TASCAM CG-2000 | Owners Manual - Page 20
    pop-up. 3. Press the MULTI JOG dial to restart the reference redundancy function using the primary reference clock, and return to the menu screen. 20 TASCAM CG-2000
  • TASCAM CG-2000 | Owners Manual - Page 21
    to their factory defaults by restoring all the settings in the unit to their factory default settings. (See "Restoring factory default settings" on page 27.) TASCAM CG-2000 21
  • TASCAM CG-2000 | Owners Manual - Page 22
    number, it will not be overwritten when the new file is saved. 3. Turn the MULTI JOG dial to set the MODE item to EXPORT. 22 TASCAM CG-2000
  • TASCAM CG-2000 | Owners Manual - Page 23
    will be overwritten. This procedure cannot be reversed. If you selected SYS ALL data, the import confirmation screen shown in step 8 will appear (skip step 7). TASCAM CG-2000 23
  • TASCAM CG-2000 | Owners Manual - Page 24
    MULTI JOG dial again to export the log. Press the EXIT/CANCEL button to cancel exporting 4. After exporting or canceling, the LOG screen reopens. 24 TASCAM CG-2000
  • TASCAM CG-2000 | Owners Manual - Page 25
    analyze function for use in the unlikely event that trouble should occur. This function allows you to identify the general trouble and resolve it easily without using measurement equipment. B/AES INPUT LEVEL This shows the signal level of the reference input. Analysis results: V TASCAM CG-2000 25
  • TASCAM CG-2000 | Owners Manual - Page 26
    it to output an alarm through a dedicated connector when trouble occurs. To use this function, just connect the ALARM OUTPUTS redundancy function This unit has two power supply circuits, and supports redundancy to prevent problems related to the power supply. By default, the power TASCAM CG-2000
  • TASCAM CG-2000 | Owners Manual - Page 27
    firmware, for example. 1. Press the MENU button repeatedly to open the UTILITY 2 menu page, and turn the MULTI JOG dial to select the VERSION item. TASCAM CG-2000 27
  • TASCAM CG-2000 | Owners Manual - Page 28
    29.97 25 29.97 59.94 *3: This will not be restored to the factory default even if the FACTORY PRESET item is executed. 28 TASCAM CG-2000
  • TASCAM CG-2000 | Owners Manual - Page 29
    connector Output level: 1.0-3.5Vp-p (can set by 0.5V steps in menu) Output impedance: 75 Ω Supported frequencies: 32/44.1/48/88.2/96/176.4/192 kHz 11.2896/12.288 MHz (Super Clock, only (0 to 40 ºC) Long-term frequency stability: ±0.005 ppm (daily) ±0.5 ppm (annually) TASCAM CG-2000 29
  • TASCAM CG-2000 | Owners Manual - Page 30
    Operating temperature range 0-40°C (32-104°F) NN NN NN NN NN NN • Illustrations in this Owner's Manual might differ in part from the actual product. • Specifications and external appearance could be changed without notification to improve the product. 30 TASCAM CG-2000 NN NN
  • TASCAM CG-2000 | Owners Manual - Page 31
    instructions contained in your owner's manual. 4. Damage occurring during shipment of the product. (Claims must be presented to the carrier) 5. Damage resulting from repair or attempted repair by anyone other than TEAC or an authorized TASCAM service a defect or a problem, please contact the dealer
  • TASCAM CG-2000 | Owners Manual - Page 32
    Shennan Blvd., Futian District, Shenzhen 518040, China http://tascam.jp/ http://tascam.com/ http://teacmexico.net/ http://tascam.eu/ http://tascam.eu/ http://tascam.cn/ Printed in China ✂ WARRANTY Model/Modèle/Modell Modello/Modelo/型号 CG-2000 Serial No./No de Série/Seriennummer Numero di serie
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
D01221520A
CG-2000
Master Clock Generator
OWNER'S MANUAL