TASCAM CG-2000 Specifications
TASCAM CG-2000 Manual
 |
View all TASCAM CG-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
TASCAM CG-2000 manual content summary:
- TASCAM CG-2000 | Specifications - Page 1
Product Spec Sheet Master Clock Generator CG-2000 CG-2000 Feb, 2015 ■ Specifications Inputs and outputs VIDEO INPUTS set to 75/50/OFF in menu) Supported frequencies WORD CLOCK: 32/44.1/48/88.2/96/176.4/192 kHz （−4/−0.1/0.0/+0.1/+4% PULL UP/DOWN supported only when 48/96/192 kHz selected） - TASCAM CG-2000 | Specifications - Page 2
CG-2000 CALIBRATION INPUT Connector type: Input level: Input impedance: Supported frequencies ATOM: GPS: BNC 0.5-5.0 Vp-p 50 Ω (can turn : 1.0-3.5 Vp-p (can set by 0.5V steps in menu) Output impedance: 75 Ω Supported frequencies: 32/44.1/48/88.2/96/176.4/192 kHz 11.2896/12.288 MHz (Super Clock - TASCAM CG-2000 | Specifications - Page 3
CG-2000 Performance Internal oscillator Type: Permitted frequency deviation: Frequency temperature characteristics: Long-term frequency stability: OCXO（oven-controlled crystal oscillator） ±0.01 ppm （Adjusted value when shipped - TASCAM CG-2000 | Specifications - Page 4
■ Dimensional drawings CG-2000 _____ ※TASCAM is trademark of TEAC CORPORATION, registered in the U.S. and other countries. ※Other company names, product names and logos are the trademarks or registered trademarks of
-
1 -
2 -
3 -
4
 |
 |
CG-2000
0005a
-
1-
TEAC CORPORATION
Feb, 2015
Product Spec Sheet
Master Clock Generator
CG-2000
■
Specifications
Inputs and outputs
VIDEO INPUTS
Connector type:
BNC
Input level:
0.5–2.0 Vp
-
p
Input impedance:
75 Ω (can turn ON/OFF in menu)
Input format
SD video black burst:
NTSC (RS-170A)
PAL (ITU-R624)
SD video composite sync:
NTSC B/W (RS-170)
HD video tri-ｌevel:
720p/50/59.94/60 (SMPTE 296M)
1080p/23.976/24/25/29.97/30/50/59.94/60 (SMPTE 274M)
1080i/23.976/24/25/29.97/30 (SMPTE 274M)
1080PsF/23.976/24/25/29.97/30 (SMPTE RP211)
Permissible frequency deviation:
±10 ppm
WORD/EXT INPUTS
Connector type:
BNC
Input level:
0.5-5.0 Vp
-
p
Input impedance:
75/50 Ω (can set to 75/50/OFF in menu)
Supported frequencies
WORD CLOCK:
32/44.1/48/88.2/96/176.4/192 kHz
（−4/−0.1/0.0/+0.1/+4% PULL UP/DOWN supported only when 48/96/192 kHz selected）
ATOM:
10.0 MHz
GPS:
10.0 MHz
Permissible frequency deviation:
±10 ppm
AES3/11 INPUT
Connector type:
XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input level:
0.2-10 Vp
-
p
Input impedance:
110 Ω
Format:
AES11-2003, AES3-2003, IEC60958-4
Supported frequencies:
32/44.1/48/88.2/96/176.4/192 kHz
（−4/−0.1/0.0/+0.1/+4% PULL UP/DOWN supported only when 48/96/192 kHz selected）
Permissible frequency deviation:
±10 ppm