TASCAM DA-6400 DA-6400dp Owners Manual Addendum V2.10
TASCAM DA-6400 Manual
 |
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
TASCAM DA-6400 manual content summary:
- TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 1
...24 New functions in firmware version 1.40...26 TASCAM IF-AN16/OUT analog output interface card support added...26 New functions in firmware version 1.30...28 TASCAM DA-6400 Control iPad remote control app support added...28 TASCAM IF-AE16 AES/EBU interface card support added...28 Function added - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 2
DA-6400/DA-6400dp New functions in firmware version 2.10 The following new functions have been added in firmware version 2.10. 00A cascade function that allows simultaneous recording/playback operations on two units is now supported working properly for N number of units. 2 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 3
DA-6400/DA-6400dp NOTE ii The cascade status is also shown on the INFORMATION screen. ii If the status is anything other than Cascade OFF any other device. Option MASTER (default) SLAVE-01 Meaning Sets this unit as the cascade master. Sets this unit as cascade slave 1. 3 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 4
DA-6400/DA-6400dp Home Screen in cascade mode When CASCADE MODE is on, the top right of the Home Screen will appear as follows. : Name according to REC FILE FORMAT screen FILE NAME setting. : Characters that show cascade ID (M/S1) TTT: Number tt: Channel number 4 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 5
on the front of the unit, RS-422, NETWORK (including TASCAM DA-6400 Control) or PARALLEL control, or a USB keyboard 00When the following settings are made on multiple units, see "Support for timecode synchronized playback of all takes in the current folder" on page 19. 5 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 6
units to the same network. When connecting to a network that has a DHCP server or when only the DA-6400 and a hub are connected in a network that does not have a DHCP server, set the IP SETUP SLAVE-01 unit WORD THRU WORD IN 6 TASCAM DA-6400/DA-6400dp Connections for audio clock synchronization - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 7
DA-6400/DA-6400dp 5. If you want to conduct recording operations using timecode, the same timecode can also be provided to cascade slave unit " to match the CASCADE ID setting. cascade status added to INFORMATION screen The INFORMATION screen now shows the cascade status. 7 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 8
DA-6400/DA-6400dp New functions in firmware version 2.00 The following new functions have been added in firmware version 2.00. 00A playlist function is now supported. This allows takes to be assigned in any order and playback areas for each one to be set, for example. 00A theater play function - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 9
being created. For details about how to input names, see "Editing text" in "4 - Recording" of the Owners Manual. 5. After editing the playlist name, select ENTER, and press the MULTI JOG dial to open a confirmation pop-up Take List Mode, the unit switches to Playlist Mode. 9 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 10
DA-6400/DA-6400dp Deleting, copying and editing the names of playlist files For details about how to delete, copy and edit the names the name of the playlist being saved. For details about how to input names, see "Editing text" in "4 - Recording" of the Owners Manual. 10 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 11
as follows. Icon Meaning Current entry (entry is currently set for playback) Normal entry with no problems INFO pop-up example Entry that cannot be played back (take does not match the current REC Fs without assigned take This entry does not have a take assigned to it. TASCAM DA-6400/DA-6400dp 11 - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 12
DA-6400/DA-6400dp Assigning takes to playlist entries (ASSIGN) 1. Load the playlist to which you want to assign takes, and open the playlist entry press the MULTI JOG dial to return to the playlist entry list screen and assign the selected take to the selected entry. 12 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 13
DA-6400/DA-6400dp Copying playlist entries (COPY) The selected entry can be copied to a designated position. 1. Open the playlist entry list screen. 5. . 4. Turn the MULTI JOG dial to select the position to which you want to copy the entry (copy destination entry). TASCAM DA-6400/DA-6400dp 13 - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 14
DA-6400/DA-6400dp Moving playlist entries (MOVE) The selected entry can be moved to a designated position. 1. Open the playlist entry list screen. Clearing ] button to close the pop-up message. 5. Press the MULTI JOG dial to move the selected entry to that position. 14 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 15
DA-6400/DA-6400dp Deleting playlist entries (DELETE) The selected entry can be deleted, moving following entries forward. 1. Open the playlist entry list red. The green b shows the current playback position. The white b icons show marks have been added to the entry. TASCAM DA-6400/DA-6400dp 15 - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 16
DA-6400/DA-6400dp 4. Operations on the START/END POINT screen are somewhat different than on other screens. Control assignments are shown at the top right of the screen. 1 When the frame cause the following pop-up message to appear. Recording will not be possible. 16 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 17
DA-6400/DA-6400dp Theater play function added A theater play function has been added. This allows the addition of marks for the playback starting pause s$STANDBY s$END If REPEAT MODE is ON, return to $START or $STANDBY in the first take. If REPEAT MODE is OFF, stop . TASCAM DA-6400/DA-6400dp 17 - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 18
DA-6400/DA-6400dp Inputting names for theater play playback range marks Use the following procedures to easily input the names of marks AUTO READY function operation mode. Option OFF: ON: This disables the AUTO READY function. This enables the AUTO READY function. 18 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 19
DA-6400/DA-6400dp Support for timecode synchronized playback of all takes in the current folder Timecode synchronized playback of all takes in the current folder is now supported * *Supported from firmware version 2.10. (See "Function explanation additions and changes" on page 35.) Support for - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 20
DA-6400/DA-6400dp Home Screen menu functions added When the Home Screen is open, pressing the MENU button while pressing the SHIFT button now opens a pop-up message will appear and the menu will not open. ii Menu items that cannot be used are shown with gray characters. 20 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 21
DA-6400/DA-6400dp My MENU function added A My MENU function has been added that can be used to show only selected menu pages. You can decrease MENU MODE to FULL MENU, you can show all the menu pages while retaining the My MENU page visibility settings to use again later. TASCAM DA-6400/DA-6400dp 21 - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 22
supported. As a result, network connection with the DA-6400 can be achieved easily from Mac OS and Telnet, VNC and FTP apps that support mDNS. The DA-6400 name that is shown on Mac OS and apps that support Editing text" in "4 - Recording" of the Owners Manual. NOTE ii The " . " character cannot be - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 23
DA-6400/DA-6400dp Two types of VNC server compressed transmission formats supported Two types of compressed transmission formats are now supported with the VNC server function, enabling transmission volumes to be and other metadata will now be added to BWF files. TASCAM DA-6400/DA-6400dp 23 - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 24
DA-6400/DA-6400dp New functions in firmware version 1.50 The following new functions have been added in firmware how to edit names, see "Editing text" in "4 - Recording" of the Owners Manual. The following types of track names can be input. oo "-01": Hyphen with a two TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 25
one file. If you want to play back takes that include files with track names update that DA-6400 unit to firmware version 1.50 or later. Do not add track names to take file names if you want to play back takes on a DA-6400 unit using a firmware version earlier than 1.50. TASCAM DA-6400/DA-6400dp 25 - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 26
DA-6400/DA-6400dp New functions in firmware version 1.40 The following new functions have been added in firmware version 1.40. 00The TASCAM IF-AN16/OUT analog output interface card is now supported. TASCAM IF-AN16/OUT analog output interface card support added The TASCAM IF-AN16/OUT analog - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 27
DA-6400/DA-6400dp 4. Adjust the output levels. Options: 0.0dB (default value) − -14.0dB (0.5dB/step) 4.1 EDIT MODE: When EDIT MODE is Individual The the end of the output level value. If the setting values of all the channels being adjusted match, no * will be shown. TASCAM DA-6400/DA-6400dp 27 - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 28
the button to stop recording TASCAM DA-6400 Control iPad remote control app support added The TASCAM DA-6400 Control iPad remote control app is now supported. TASCAM IF-AE16 AES/EBU interface card support added The TASCAM IF-AE16 AES/EBU interface card is now supported. If installed in SLOT 1 or - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 29
DA-6400/DA-6400dp SRC This turns the sample rate converter on/off for each signal line off automatically and the INFO indicator will set to ON, rechasing will start when the synchronization inaccuracy exceeds the threshold level set on the TC RECHASE THRESH screen. TASCAM DA-6400/DA-6400dp 29 - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 30
the current take to its end. * In addition to the front panel button, parallel, serial, or network control can be used to start playback. ii While waiting to move to the next take (when is blinking), will continue to repeat playback. In this case, the will stop blinking. 30 TASCAM DA-6400/DA-6400dp - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 31
INPUT ROUTING setting list. oo 8ch BLOCK selected INPUT ROUTING settings list NOTE When an interface card with less than 64 input signal channels is installed, the names of unavailable input connectors appear gray the MULTI JOG dial to open a pop-up confirmation message. TASCAM DA-6400/DA-6400dp 31 - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 32
BLOCK selected OUTPUT ROUTING settings list NOTE When an interface card with less than 64 output signal channels is installed, the Set a group of multiple channels to be changed at the same time. 32 TASCAM DA-6400/DA-6400dp RANGE SELECT appears to the left of the selection area. Press the MULTI - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 33
function. REC OPTIONS page NOTE This function only affects STOP/PAUSE operations from the following control sources. oo Front panel oo USB keyboard oo Parallel connector oo Keyboard via VNC viewer seconds, recording will continue and the following message will appear. TASCAM DA-6400/DA-6400dp 33 - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 34
DA-6400/DA-6400dp New functions in firmware version 1.21 The following new functions have been added in firmware version 1.21. 00Support for the TASCAM IF-DA64 Dante interface card Support for the TASCAM IF-DA64 Dante interface card The TASCAM IF-DA64 Dante interface card is now supported. If you - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 35
required for formatting appears as shown below. 00The following has been added to "Settings for IF-MA64/EX and IF-MA64/BN cards" of "4 - Recording" in the DA-6400/DA6400dp Owner's Manual. When IF-MA64/EX installed MADI COAXIAL EQUALIZER (same for both IF-MA64/EX and IFMA64/BN) Set the equalizer for - TASCAM DA-6400 | DA-6400dp Owners Manual Addendum V2.10 - Page 36
value correction Incorrect: STATIC (default), AUTO Correct: STATIC, AUTO (default) 00The NOTE under "Remote control (Telnet)" of "7 - Internal Settings" in the DA-6400/DA-6400dp Owner's Manual contained an error that has been fixed. Correction of second NOTE item Incorrect: Telnet connection is
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
TASCAM
DA-6400/DA-6400dp
1
DA-6400/DA-6400dp
D01283920F
Contents
New functions in firmware version 2.10
...................................................................................................................................................
2
Cascade function support
....................................................................................................................................................................................................................
2
cascade status added to INFORMATION screen
...........................................................................................................................................................................
7
New functions in firmware version 2.00
...................................................................................................................................................
8
Playlist function supported
..................................................................................................................................................................................................................
8
Theater play function added
.............................................................................................................................................................................................................
17
AUTO READY function added
............................................................................................................................................................................................................
18
Support for timecode synchronized playback of all takes in the current folder
............................................................................................................
19
Support for playback of WAV files in 32-bit PCM and 32-bit floating formats
.................................................................................................................
19
Take list sorting functions added
.....................................................................................................................................................................................................
19
Home Screen menu functions added
............................................................................................................................................................................................
20
My MENU function added
..................................................................................................................................................................................................................
21
mDNS (Multicast DNS) supported for easy network connection
.........................................................................................................................................
22
Two types of VNC server compressed transmission formats supported
...........................................................................................................................
23
“None” added to REC FILE FORMAT menu FILE NAME setting
..............................................................................................................................................
23
SNTP menu page now shows current date and time
...............................................................................................................................................................
23
Current folder name added to INFORMATION screen
..............................................................................................................................................................
23
Marks added automatically at buffer overflows during recording
......................................................................................................................................
23
Change in display when Master Clock is not locked.
................................................................................................................................................................
23
Track Names and other metadata added to BEXT chunk data of BWF files
.....................................................................................................................
23
iXML chunk data of Track Names and other metadata added to BWF files
......................................................................................................................
23
New functions in firmware version 1.50
.................................................................................................................................................
24
TRACK NAMES function added
.........................................................................................................................................................................................................
24
New functions in firmware version 1.40
.................................................................................................................................................
26
TASCAM IF-AN16/OUT analog output interface card support added
................................................................................................................................
26
New functions in firmware version 1.30
.................................................................................................................................................
28
TASCAM DA-6400 Control iPad remote control app support added
..................................................................................................................................
28
TASCAM IF-AE16 AES/EBU interface card support added
.......................................................................................................................................................
28
Function added to synchronize with SMPTE timecode and play the current take
........................................................................................................
29
VAMPING mode added to repeat playback function modes
.................................................................................................................................................
30
Function added to set the input and output signal routing for each individual channel
...........................................................................................
31
On/off setting added for NO SIGNAL error checking function
.............................................................................................................................................
33
Function added that requires pressing and holding the button to stop recording
......................................................................................................
33
New functions in firmware version 1.21
.................................................................................................................................................
34
Support for the TASCAM IF-DA64 Dante interface card
..........................................................................................................................................................
34
Owner's Manual Addendum
....................................................................................................................................................................
35
FTP connection settings note
...........................................................................................................................................................................................................
35
Function explanation additions and changes
.............................................................................................................................................................................
35
Document corrections
.........................................................................................................................................................................................................................
36
0418.MA-2475B