TASCAM DA-6400 DA-6400dp Owners Manual

TASCAM DA-6400 Manual

Get TASCAM DA-6400 PDF manuals and user guides View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM DA-6400 manual content summary:

  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 1
    D01249320A DA-6400 DA-6400dp Digital Multitrack Recorder OWNER'S MANUAL
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 2
    to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. aufzukommen. 2 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 3
    any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as loss. • If you are experiencing problems with this product, contact TEAC for a service referral. Do not use the product until lation. 3 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 4
    and/or accumulators, please contact your city office, waste disposal service or the shop where you purchased them. 88 For China 2000m 机种 ：DA-6400 铅 品名 (Pb) 1 CHASSIS 部份 ○ 2 FRONT PANEL 部份 ○ 3 ○ 4 ○ 5 PCB Assy 部份 × 6 ○ 7 × 8 LABEL 部份 ○ 9 ○ 汞 (Hg
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 5
    manually when recording 28 Adding marks when recording 28 Setting the pause mode function 28 Setting input signal routing 28 Making I/O card settings 28 Settings for IF-MA64/EX and IF-MA64/BN cards the SNTP function 40 Network functions (FTP server/telnet/VNC 42 5 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 6
    51 INFO button and indicator appearance 51 Checking the firmware version 51 Firmware update procedures 52 Viewing media information 52 Setting peak hold Troubleshooting 57 13 - Specifications 58 General 58 Analog output 58 Control input/output 58 Other 58 6 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 7
    in the future. Please contact TASCAM Customer Support (see back cover) if any of these items are missing or have been damaged during transportation. • Main unit 1 • Power cord (DA-6400 1 • Power cord (DA-6400dp 2 • AK-CC25 (SSD/HDD case 1 • TASCAM TSSD 1 • USB 3.0-compatible cable (with
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 8
    , thinner, alcohol or other chemical 8 TASCAM DA-6400/DA-6400dp agents. Doing so could damage the Please check this site or contact TASCAM customer support. (http://teac-global.com/) Precautions TEAC Global Site You can download the Owner's Manual necessary for this unit from the TEAC Global Site
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 9
    Front panel 88 DA-6400 front panel 2 - Names and Functions of Parts 88 DA-6400dp front panel 1 STANDBY/ON switch Use to turn the unit on and to put it into standby. the HOME [METER] button, press and turn this dial to adjust the brightness of just the color display. 9 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 10
    could harm your hearing or result in other trouble. e USB2.0 port Connect (and disconnect) USB names, for example as well as for external control. By default, the unit is set to use 2.0 port, only USB 2.0 transfer speeds are supported. y Security screw hole You can use the TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 11
    This is a 15-pin D-sub parallel control terminal. Connect an external controller here. z Heat dissipation fan This fan is to prevent the unit from overheating. Do not allow anything to block the fan and prevent the dispersion of heat. x AC IN connector (DA-6400 only) Plug the included power cord in
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 12
    TALLY) I INPUT AUX5 (F.FWD) I STOP I PLAY I INPUT AUX6 (PAUSE) +5V I: For command input and transport control Internal circuit with +5V pull-up Operates with low signal input of 50 msec or longer When INPUT AUX is set to the timecode time of the recording/ playback take. 12 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 13
    shows the name of the mark at or immediately before the current time. u Level meter guide This level meter guide can be used to evaluate input and output levels. This line is shown at −18 dB. The position , the solo selection frame cannot be moved to channels 33-64. TASCAM DA-6400/DA-6400dp 13
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 14
    with media. Make preference settings. Make system settings. 14 TASCAM DA-6400/DA-6400dp The various menu items are as follows. Menu item 64 SLOT 1 page Set various functions for the card loaded in SLOT 1 page 28 SLOT 2 page Set various functions for the card loaded in SLOT 2 page 28 TC SETUP
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 15
    and time page 44 page 19 Menu item VERSION INFO F/W UPDATE Function Show system version information Update the firmware Page page 51 page 52 NOTE The settings for all menu items, except the oscillator on/off setting, are retained even when the unit is turned off. TASCAM DA-6400/DA-6400dp 15
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 16
    to the Menu Screen. • Menu items that cannot be changed are shown with gray characters and cannot be selected using the MULTI JOG dial. 16 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 17
    the included security screw kit to lock the SDD/HDD case so that cannot be removed. Use a Phillips (+) driver to install/remove the security screw. TASCAM DA-6400/DA-6400dp 17
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 18
    drive during the execution of a firmware update could result in the unit card is already installed, remove it.) 2. Insert the I/O card into the card slot. Align the edges of the I/O card with the white guides inside the slot and insert it 18 TASCAM DA-6400/DA-6400dp securely. Push the I/O card
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 19
    selected NOTE • Press the EXIT [PEAK CLEAR] button to cancel formatting. • If no SSD/HDD drive is loaded, the following pop-up message will appear. TASCAM DA-6400/DA-6400dp 19
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 20
    to do so might cause sudden loud noises, which could harm your hearing or result in other trouble. Setting headphones monitoring mode The headphones monitoring mode can be set. 1. Select the PHONES MONITOR MODE switch the headphone monitoring mode between STEREO and MONO. 20 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 21
    lock function setting screen. (See "Menu operation procedures" on page 16.) FRONT PANEL This locks the controls on the front of the unit. Options: UNLOCK (default), LOCK NOTE The following operations are possible and not allow playback. Options: Disable (default), Enable TASCAM DA-6400/DA-6400dp 21
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 22
    the master clock, noise might occur in the audio input and output. Be aware of this when choosing when to change the master clock. 22 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 23
    : Allow input monitoring to be turned on/off for specific channels individually or all at once 3. Confirm the setting and return to the Menu Screen. TASCAM DA-6400/DA-6400dp 23
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 24
    the SHIFT button to move the cursor by 4 channels at a time. Setting the first channel to be included when selecting all channels at once 24 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 25
    .1kHz, 48kHz (default), 88.2kHz, 96kHz 7. Confirm the setting selection to change the sampling frequency used by the unit and return to the Menu Screen. TASCAM DA-6400/DA-6400dp 25
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 26
    . The gray background shows characters in excess of the maximum number. These will be discarded when you select Enter and confirm the input text. 26 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 27
    this function, you can quickly search for locations where problems occurred during recording. 1. Select the AUTO MARK item setting and return to the Menu Screen. Incrementing take numbers manually You can press the 0 [SPLIT] button during recording incremented in order. TASCAM DA-6400/DA-6400dp 27
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 28
    playing back or in playback standby. (See "Adding marks" on page 45.) • A mark added manually will be named "MARKxx"*. *The "xx" is a number given to all marks that is incremented IF-MA64/EX installed NOTE No Card is shown when no I/O card (sold separately) is installed. 28 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 29
    4 - Recording Settings for IF-MA64/EX and IF-MA64/BN cards 88 MADI INPUT STATUS This shows the channel mode/frame frequency of the MADI input signal. Example: above are not continuous recording times, but rather they are the total possible recording times for the media. TASCAM DA-6400/DA-6400dp 29
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 30
    . • When a take is selected, press the 9 [CHASE] button to return to the Home Screen and enter playback standby at the beginning of that take. 30 TASCAM DA-6400/DA-6400dp Turn the MULTI JOG dial to select the desired operation, and press the MULTI JOG dial to execute it as follows. 88 ENTER/EXIT
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 31
    other than English letters, numerals and symbols, opening a text input screen will delete them. • The following symbols and punctuation marks cannot be used in text. TASCAM DA-6400/DA-6400dp 31
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 32
    the folder pop-up menu. 5. Select the COPY item, and press the MULTI JOG dial to open a confirmation pop-up message. When copying a folder 32 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 33
    press the EXIT [PEAK CLEAR] button to cancel the changes and return to the BROWSE screen. • You can also use a USB keyboard to input numbers. TASCAM DA-6400/DA-6400dp 33
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 34
    In order to keep takes together on an SSD/HDD drive, there are audio folders such as "DA Files" and audio file groups called takes inside audio folders. Folder structure The folder structure is as have a 2-digit channel number, it will be recognized as a single take. 34 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 35
    the setting and return to the Menu Screen. NOTE When repeat playback is on, that area will be played back according to the playback mode. TASCAM DA-6400/DA-6400dp 35
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 36
    open the START TIME screen. START TIME item  Set the time when timecode resumes. NOTE You can also use a USB keyboard to input numbers. 36 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 37
    mode. Option Meaning Generator Out Output the timecode of the built-in timecode generator. Play Out (default) This outputs the timecode contained in the file. TASCAM DA-6400/DA-6400dp 37
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 38
    . TIME item Set the amount of time that will cause an EOM tally signal to be output. Options: OFF (default), 1sec - 99sec (1sec increments) 38 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 39
    IP ADDR, SUBNET and GATEWAY items on the IP SETUP screen manually. Set the IP ADDR, SUBNET and GATEWAY items on the DA-6400). Use up to 10 characters. For details about how to edit the text, see "Editing text" on page 26. NOTE Press the MULTI JOG dial on PRESET5 to input "DA-6400". TASCAM DA-6400/DA
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 40
    servers on the hour could result in congestion, the unit will access the SNTP server randomly during the first 10 minutes of the hour. 40 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 41
    to enable the daylight savings time function. Options Disable (default): Do not use the daylight savings time function. Enable: Use the daylight savings time function. TASCAM DA-6400/DA-6400dp 41
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 42
    support (contact information at the end of this manual). 88 Required settings for FTP connection The following settings are necessary to connect to this unit by FTP. IP address: The IP address of the unit is shown in the IP ADDRESS item on the NETWORK page. Port number: 21 User name: DA-6400
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 43
    EXTERNAL Control manual). oo To the right of the REBUILD item in the BROWSE screen pull-up menu. 5. Adding new folders to the unit Adding new folders to the unit is always possible. 6. Deleting folders on the unit The current folder can only be deleted when the unit is stopped. TASCAM DA-6400/DA
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 44
    the IP ADDRESS item on the NETWORK page. Password: DA-6400 (default) (Case-sensitive) This can be changed on the the unit's display but it cannot be used to control the unit. • If a NETWORK page setting is changed contact TASCAM customer support (contact information at the end of this manual). •
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 45
    by the automatic mark function, one take can have up to 99 marks added to it. 88 Adding marks manually Press the MULTI JOG dial to add a mark at the current playback/ recording point. The mark will be LOCATE Move to the selected mark. (See "Moving to marks" on page 45.) TASCAM DA-6400/DA-6400dp 45
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 46
    show the numbers of marks of different types in the current take. Press the EXIT [PEAK CLEAR] button to close the pop-up message. 46 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 47
    on which control was pressed. 88 If the MULTI JOG dial was pressed: Playback or playback standby is resumed according to the state before locating. 88 If the 7 button was pressed: Playback starts. 88 If the 9 [CHASE] button was pressed: The unit enters playback standby. TASCAM DA-6400/DA-6400dp 47
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 48
    audio files that meet the following conditions and play them as takes. Moreover, the unit can load audio files that were created by a TASCAM DA-6400/DA-6400dp and meet the following conditions and play them as is. • File formats: BWF, WAV • Sampling frequencies: 44.1, 48, 88.2, 96 kHz • Quantization
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 49
    of the DA-6400 to become unstable and damage files on the SSD/HDD. NOTE The expression "computer" in the explanations in this chapter refers to a Windows or Mac computer that this unit supports. Computer computer could damage all the equipment connected to the cable. TASCAM DA-6400/DA-6400dp 49
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 50
    • Depending on the Mac OS X version, you can also eject the DA-6400 by clicking the eject icon next to its name in a Finder window or using a control key operation. 2. End the connection from the unit. Press the EXIT be connected to a computer and exchange data with it. 50 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 51
    will not appear again until recording ends. On the VERSION INFORMATION screen, information is shown about the system firmware version and build number, as well as cards installed in SLOT 1 and SLOT 2. 2. Press the EXIT [PEAK CLEAR] button to return to the Menu Screen. TASCAM DA-6400/DA-6400dp 51
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 52
    Update the firmware of the main unit Slot1: Update the firmware of the I/O card installed in SLOT 1 Slot2: Update the firmware of the I/O card installed in SLOT 2 6. When the USB flash drive and firmware update file differ. 8. Press the MULTI JOG dial to start the update. 52 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 53
    numeric keypad to the USB2.0 port on the front of the unit, and use it to control the unit. Various controls are possible, but it makes inputting text much more efficient. Setting the keyboard type Set the the beginning. Use the END/x key to move the cursor to the end. TASCAM DA-6400/DA-6400dp 53
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 54
    are assigned to the keyboard as follows. Character input and control modes switch automatically according to the unit operation. 88 " on page 53.) Open MARK INFO screen Go to previous page of menu screen 54 TASCAM DA-6400/DA-6400dp Keyboard key R key P key Shift + P key S key F key N key Shift
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 55
    appear. If the system backup data file on the connected USB flash drive does not contain valid data If importing completed, but some data with problems was not imported (part of the system backup data file is damaged) TASCAM DA-6400/DA-6400dp 55
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 56
    JOG dial to open a Loading File... pop-up and restore the unit to its factory defaults. After it completes, the Menu Screen will reopen. 56 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 57
    Troubleshooting If you are having trouble with the operation of this unit, please try the following before seeking repair. If these measures do not solve the problem, please contact the store where you bought the unit or TEAC customer support Use the included USB cable. TASCAM DA-6400/DA-6400dp 57
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 58
    or higher (THD+N 0.1% or less, when into 32 Ω load) Control input/output 88 USB port Connector: USB 2.0 A type Protocol: USB DA-6400: 3.9 kg DA-6400dp: 4.0 kg (Without I/O card (sold separately) or SSD/HDD case installed) 88 Operating temperature range 0°C - 40°C (32°F - 104°F) 58 TASCAM DA-6400/DA
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 59
    NN NN NN NN NN NN NN • Illustrations in this manual might differ in part from the actual product. • Specifications and external appearance might    TASCAM DA-6400/DA-6400dp 59
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 60
    , EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 20 Jun 2008] THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND 60 TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 61
    INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) and any portions thereof, and that both notices appear in supporting documentation. CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS TASCAM DA-6400/DA-6400dp 61
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 62
    NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR responsibilities and use of this software are controlled by the agreement found in the notice and this permission notice appear in supporting documentation, and that the name of CMU TASCAM DA-6400/DA-6400dp
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 63
    instructions contained in your owner's manual. 4. Damage occurring during shipment of the product. (Claims must be presented to the carrier) 5. Damage resulting from repair or attempted repair by anyone other than TEAC or an authorized TASCAM service a defect or a problem, please contact the das Ger
  • TASCAM DA-6400 | DA-6400dp Owners Manual - Page 64
    6021 Shennan Blvd., Futian District, Shenzhen 518040, China http://tascam.jp/ http://tascam.com/ http://teacmexico.net/ http://tascam.eu/ http://tascam.eu/ http://tascam.cn/ Printed in China ✂ WARRANTY Model/Modèle/Modell Modello/Modelo/型号 DA-6400/DA-6400dp Owner's name/Nom du possesseur/Name des
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
D01249320A
DA-6400
DA-6400dp
Digital Multitrack Recorder
OWNER'S MANUAL