TASCAM DA-6400 TELNET protocol specifications

TASCAM DA-6400 Manual

Get TASCAM DA-6400 PDF manuals and user guides View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals

TASCAM DA-6400 manual content summary:

  • TASCAM DA-6400 | TELNET protocol specifications - Page 1
    TASCAM DA-6400/DA-6400dp CONTROL I/O connector TELNET protocol specifications Ver. 1.00 April 2016 TEAC Corporation
  • TASCAM DA-6400 | TELNET protocol specifications - Page 2
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications CAUTION TEAC Corporation (hereafter, "TEAC") the customer in order to develop devices (including software) that are compatible with the covered TASCAM products. 3. The acquisition of this document by the customer does not mean that the customer
  • TASCAM DA-6400 | TELNET protocol specifications - Page 3
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications 1. Overview The ETHERNET (TELNET) connector built into the DA-6400/DA-6400dp can be used to control the DA-6400/DA-6400dp from a computer or another external device. In this document, the DA-6400/DA-6400dp is called the "controlled device".
  • TASCAM DA-6400 | TELNET protocol specifications - Page 4
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications Command list The list of commands is as follows. Control/Preset/Sense Command Return Command 0F INFORMATION REQUEST 8F INFORMATION RETURN 10 STOP 12 PLAY 13 RECORD 14 PAUSE 16 SEARCH 1A SKIP 23 DIRECT
  • TASCAM DA-6400 | TELNET protocol specifications - Page 5
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications Vender command list The list of vender commands (Command 7F/FF) is as follows. Their command codes are indicated as a combination
  • TASCAM DA-6400 | TELNET protocol specifications - Page 6
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications 7F0860 FILE NAME SELECT FF08E0 FILE NAME RETURN 7F1001 MEDIA REMAIN FF42B0 TAKE ERASE ACK 7F4252 TAKE COPY FF42D2 TAKE COPY ACK Caution: If no supported version is indicated in the "Adopted F/W Ver." column, ver. 1.30 or later are
  • TASCAM DA-6400 | TELNET protocol specifications - Page 7
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications Command sequence Most of the time, the controlled device does not send ACK in response to transport control and data preset commands sent by the controlling device. The controlled device sends return commands in response to data sense
  • TASCAM DA-6400 | TELNET protocol specifications - Page 8
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications Command details The commands, data other than the above, it will send ILLEGAL [F2]. Return none PAUSE This pauses playback of the controlled device. Use RECORD (Record Pause) to pause recording. Command 14 Machine ID 0 Data 2 bytes
  • TASCAM DA-6400 | TELNET protocol specifications - Page 9
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications SEARCH This starts search playback on the controlled device. Search playback will continue until STOP, PLAY, PAUSE or another command is received. Command 16 Machine ID 0 Data 2 bytes Data 1 Data 2 Meaning Notes 0 0 Search
  • TASCAM DA-6400 | TELNET protocol specifications - Page 10
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications DIRECT TRACK SEARCH PRESET Specify a take number to search for it directly. After a direct search, the operation of the controlled device depends on the data format (length) of this command. When the Data length is 4-byte When this
  • TASCAM DA-6400 | TELNET protocol specifications - Page 11
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications CLOCK DATA PRESET This sets date and time information on the controlled device. A return command is only sent when Sense [FF] is specified for Data 1 and Data 2. Command 27 Machine ID 0 Data 10 bytes or 2 bytes Meaning
  • TASCAM DA-6400 | TELNET protocol specifications - Page 12
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TIME SEARCH PRESET Search by designating a take number or time. After searching, the operation of the controlled device depends on the data format (length) of this command. When the Data length is 12-byte If this command is received when
  • TASCAM DA-6400 | TELNET protocol specifications - Page 13
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications REPEAT MODE SELECT This sets the repeat mode of the controlled device. A return command is only sent when Sense [FF] is specified. Command 37 Machine ID 0 Data 2 bytes Data 1 Data 2 Meaning Notes 0 0 Repeat Off Repeat playback
  • TASCAM DA-6400 | TELNET protocol specifications - Page 14
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications MECHA STATUS SENSE This requests that operation status information for the controlled device be returned. Command 50 Machine ID 0 Data none Return MECHA STATUS RETURN [D0] TRACK No. STATUS SENSE This requests that the number of the
  • TASCAM DA-6400 | TELNET protocol specifications - Page 15
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TOTAL TRACK No. / TOTAL TIME SENSE RETURN [DD] KEYBOARD TYPE SENSE This requests that the type of the keyboard connected to the controlled device be returned. Command 5F Machine ID 0 Data none Return KEYBOARD TYPE RETURN [DF] ERROR
  • TASCAM DA-6400 | TELNET protocol specifications - Page 16
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications INFORMATION RETURN This is a return command in response to an "INFORMATION REQUEST [0F]" command. This returns the software version of the controlled device. Command 8F Machine ID 0 Data 4 bytes Data 1 Software version tens digit
  • TASCAM DA-6400 | TELNET protocol specifications - Page 17
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications REMOTE/LOCAL SELECT RETURN This is a return 0 Data 2 bytes Data 1 Data 2 Meaning Notes 0 0 Remote Only remote operation through the CONTROL I/O (TELNET, RS-422, PARALLEL) is enabled. Operation using the keys on the unit itself is
  • TASCAM DA-6400 | TELNET protocol specifications - Page 18
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications MECHA STATUS RETURN This is a return command Play Playing back 1 2 Ready On Playback paused 2 8 Cue Searching forward 2 9 Review Searching backward 8 1 Record Recording 8 2 Record Ready Recording standby (record ready) 8
  • TASCAM DA-6400 | TELNET protocol specifications - Page 19
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications CURRENT TRACK INFORMATION RETURN This is a return command in response to a "CURRENT TRACK INFORMATION SENSE [57]" command. Command D7 Machine ID 0/1
  • TASCAM DA-6400 | TELNET protocol specifications - Page 20
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TITLE RETURN This is a return command in response to a "TITLE SENSE [59]" command. The name of the specified take is returned
  • TASCAM DA-6400 | TELNET protocol specifications - Page 21
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications ERROR SENSE REQUEST This command is returned when the error status changes. Send ERROR SENSE [78] from the controlling device to check the error details. Command F0 Machine ID 0 Data none Request/Preset none CAUTION SENSE REQUEST
  • TASCAM DA-6400 | TELNET protocol specifications - Page 22
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications ERROR SENSE RETURN This is a return command in response to an "ERROR SENSE [78]" command. This returns the last error status.
  • TASCAM DA-6400 | TELNET protocol specifications - Page 23
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications VENDER COMMAND RETURN This is a return command in response to COMMAND [7F]. For details, see "Vender command details" below. Vender command details DA-6400/DA to media Setting related to external control Setting related to inputs and outputs
  • TASCAM DA-6400 | TELNET protocol specifications - Page 24
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications PROJECT SKIP This changes the project. If the current project is the last project, specifying "00" will move to the first
  • TASCAM DA-6400 | TELNET protocol specifications - Page 25
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications CREATE PROJECT This creates a new project. During creation, the Project Name set using "CREATE PROJECT NAME PRESET [7F024001]" (described below) will be used. At the beginning and end of execution, the controlled device will return "CREATE
  • TASCAM DA-6400 | TELNET protocol specifications - Page 26
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications DELETE PROJECT This deletes a project. Specify "0000" for Data 5-8. Data 9-12 specifies the project number. At the beginning and end of
  • TASCAM DA-6400 | TELNET protocol specifications - Page 27
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TOTAL PROJECT No. SENSE This Parameter none Return TOTAL PROJECT No. RETURN [FF02DE] MARK SET This sets a mark on the controlled device. Set a mark at the current time counter position. Command 7F Category Code 03 Sub Command
  • TASCAM DA-6400 | TELNET protocol specifications - Page 28
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications MARK TIME PRESET Specify a mark number and change its time. The mark number is the number counted from the beginning in
  • TASCAM DA-6400 | TELNET protocol specifications - Page 29
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications MARK NAME PRESET Specify a mark from Data 9 on, the unit will send ILLEGAL [F2]. Return none DELETE MARK Delete a mark on the controlled device. A mark number can be specified to delete a mark. If no mark number is specified, the nearest
  • TASCAM DA-6400 | TELNET protocol specifications - Page 30
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications MARK No. STATUS SENSE This requests that the number of the nearest mark before the current position be returned. The mark
  • TASCAM DA-6400 | TELNET protocol specifications - Page 31
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TOTAL MARK No SENSE This requests that the total number of marks in the current take be returned. Command 7F Category Code 03 Sub Command 5D Machine ID 0 Parameter none Return TOTAL MARK No. RETURN [FF03DD] 31 TEAC Corporation
  • TASCAM DA-6400 | TELNET protocol specifications - Page 32
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications CHASE SELECT This turns the chase mode of the controlled device on/off. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 06 Sub Command 00 Machine ID 0 Parameter 2 bytes
  • TASCAM DA-6400 | TELNET protocol specifications - Page 33
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TC START TIME PRESET Change the TC START TIME on the controlled device. A return TIME RETURN [FF0690] TC USER BITS PRESET Change the TC USER BITS on the controlled device. A return command is only sent when Sense [FF] is specified for
  • TASCAM DA-6400 | TELNET protocol specifications - Page 34
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TC GENERATOR MODE SELECT This sets the TC GENERATOR mode of the controlled device. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 06 Sub Command 20 Machine ID 0 Parameter 2 bytes Data 5 Data 6
  • TASCAM DA-6400 | TELNET protocol specifications - Page 35
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TC OUTPUT MODE SELECT This sets the TC mode output by the TC output connector of the controlled device. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 06 Sub Command 30 Machine ID 0 Parameter 2
  • TASCAM DA-6400 | TELNET protocol specifications - Page 36
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications RECORD FUNCTION SELECT This turns the record function of the controlled device channel number thousands digit Start channel number hundreds Start channel number Example: "6400" is channel 64 0000: all channels digit Data 9 ・ ・ Record
  • TASCAM DA-6400 | TELNET protocol specifications - Page 37
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications INPUT MONITOR FUNCTION SELECT This turns the input monitoring function of the controlled device on/off. This turns the input monitoring function on/off for the channel number specified by Data 5-8. If 0 is specified for the channel number,
  • TASCAM DA-6400 | TELNET protocol specifications - Page 38
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications BIT LENGTH SELECT This sets the bit length used by the controlled device. A return command RETURN [FF08A2] MAX FILE SIZE SELECT Set the maximum file size of the controlled device. A return command is only sent when Sense [FF] is specified
  • TASCAM DA-6400 | TELNET protocol specifications - Page 39
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications USER WORD PRESET This sets the FILE NAME USER WORD of the controlled device. A TIME INTERVAL MARKER TIME PRESET This sets the TIME INTERVAL MARKER TIME of the controlled device. A return command is only sent when Sense [FF] is specified
  • TASCAM DA-6400 | TELNET protocol specifications - Page 40
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TIME INTERVAL MARKER SELECT This sets the TIME INTERVAL MARKER of the controlled device. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 08 Sub Command 42 Machine ID 0 Parameter 2 bytes Data 5
  • TASCAM DA-6400 | TELNET protocol specifications - Page 41
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications USER WORD SENSE This requests that the USER WORD be returned. Command 7F Category Code 08 Sub Command 5A Machine ID 0 Parameter none Return USER WORD RETURN [FF08DA] FILE NAME SELECT This sets the FILE NAME used by the controlled
  • TASCAM DA-6400 | TELNET protocol specifications - Page 42
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications MEDIA FORMAT This formats the specified media of the controlled device. At the beginning and end of execution, the controlled device will return "MEDIA FORMAT ACKNOWLEDGE [FF10C4]". Command 7F Category Code 10 Sub Command 44 Machine ID
  • TASCAM DA-6400 | TELNET protocol specifications - Page 43
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications AUX ASSIGN KEY SELECT This sets the AUX KEY ASSIGN of the controlled device. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 11 Sub Command 10 Machine ID 0 Parameter 4bytes Meaning Notes
  • TASCAM DA-6400 | TELNET protocol specifications - Page 44
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications INPUT ROUTING SELECT This sets the INPUT ROUTING used by the controlled device. This sets the INPUT ROUTING from the start channel number specified by Data 5-8. A return command is only sent when Sense [xxFF] is specified for
  • TASCAM DA-6400 | TELNET protocol specifications - Page 45
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications OUTPUT ROUTING SELECT This sets the OUTPUT ROUTING used by the controlled device. This sets the setting for channel 1 higher than start channel digit Example: "6400" is channel 64 Data14 Source channel number ones digit Data15 Always
  • TASCAM DA-6400 | TELNET protocol specifications - Page 46
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications METER PEAK HOLD TIME PRESET This sets the METER PEAK HOLD TIME used by the controlled device. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 13 Sub Command 21 Machine ID 0 Parameter 2 bytes Data
  • TASCAM DA-6400 | TELNET protocol specifications - Page 47
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications DIGITAL REFRENCE LEVEL PRESET This sets the DIGITAL REFERENCE LEVEL used by the controlled device. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 14 Sub Command 20 Machine ID 0 Parameter 2 bytes
  • TASCAM DA-6400 | TELNET protocol specifications - Page 48
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TAKE RENAME Change the name of a specified take in the current project on the controlled unit. A maximum of 117 bytes in UTF-8 format can be sent from Data 9 on. At the beginning and end of execution, the controlled device will return "TAKE
  • TASCAM DA-6400 | TELNET protocol specifications - Page 49
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TAKE COPY Copy a specified take in the current project on the controlled unit to a by the folder name. At the beginning and end of execution, the controlled device will return "TAKE COPY ACKNOWLEDGE [FF42D2]". Command 7F Category Code 42
  • TASCAM DA-6400 | TELNET protocol specifications - Page 50
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications CREATE PROJECT ACKNOWLEDGE This is a return command in response to a "CREATE PROJECT [7F024000]" command. This is returned at the start of
  • TASCAM DA-6400 | TELNET protocol specifications - Page 51
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications PROJECT No. RETURN This is a return command in returned by Data 9 and later in UTF-8 format. Command FF Category Code 02 Sub Command DA Machine ID 0 Parameter 5-119 bytes Meaning Notes Data 5 Project number tens digit Data 6
  • TASCAM DA-6400 | TELNET protocol specifications - Page 52
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TOTAL PROJECT No. RETURN This is a return command in response to a "TOTAL PROJECT No. SENSE [7F025E]" command. This returns the total
  • TASCAM DA-6400 | TELNET protocol specifications - Page 53
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications MARK No. RETURN This is a return command in response to a "MARK No. STATUS SENSE [7F0355]" command. This sends the number of
  • TASCAM DA-6400 | TELNET protocol specifications - Page 54
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications MARK NAME RETURN This is a return command in response to a "MARK NAME SENSE [7F0359]" command. Command FF Category Code 03 Sub
  • TASCAM DA-6400 | TELNET protocol specifications - Page 55
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications CHASE RETURN This is a return command in response to a "CHASE SELECT [7F0600]" command. This returns the chase mode on/off status.
  • TASCAM DA-6400 | TELNET protocol specifications - Page 56
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TC GENERATOR MODE RETURN This is a return command in response to a "TC GENERATOR MODE SELECT [7F0620]" command. This returns the generator
  • TASCAM DA-6400 | TELNET protocol specifications - Page 57
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications CLOCK MASTER RETURN This is a return command in response to a "CLOCK MASTER SELECT [7F0640]" command. This returns the master clock setting.
  • TASCAM DA-6400 | TELNET protocol specifications - Page 58
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications INPUT MONITOR FUNCTION RETURN This is a return command in response to an "INPUT MONITOR FUNCTION SELECT [7F0801]" command. This returns the
  • TASCAM DA-6400 | TELNET protocol specifications - Page 59
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications PAUSE MODE RETURN This is a return command in response to a "PAUSE MODE SELECT [7F0824]" command. This returns the PAUSE mode setting.
  • TASCAM DA-6400 | TELNET protocol specifications - Page 60
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TIME INTERVAL MARKER RETURN This is a return command in response to a "TIME INTERVAL MARKER SELECT [7F0842]" command. This returns the AUTO
  • TASCAM DA-6400 | TELNET protocol specifications - Page 61
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications USER WORD RETURN This is a return command in response to a "USER WORD SENSE [7F085A]" command. The user word is returned in UTF-8 format. Command FF Category Code 08 Sub Command DA Machine ID 0 Parameter 31 bytes Meaning Notes
  • TASCAM DA-6400 | TELNET protocol specifications - Page 62
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications MEDIA REMAIN RETURN This is a return command in response to a "MEDIA REMAIN SENSE [7F1001]" command. This returns the remaining capacity of
  • TASCAM DA-6400 | TELNET protocol specifications - Page 63
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications AUX ASSIGN KEY RETURN This is a return command in response to an "AUX ASSIGN KEY SELECT [7F1110]" command. This returns the
  • TASCAM DA-6400 | TELNET protocol specifications - Page 64
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications INPUT ROUTING RETURN This is a return command in response to an "INPUT ROUTING SELECT [7F1250]" command. This returns the input settings
  • TASCAM DA-6400 | TELNET protocol specifications - Page 65
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications OUTPUT ROUTING RETURN This is a return command in response to an "OUTPUT ROUTING SELECT [7F1251]" command. This returns the output settings
  • TASCAM DA-6400 | TELNET protocol specifications - Page 66
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications METER PEAK HOLD TIME RETURN This is a return command in response to a "METER PEAK HOLD TIME PRESET [7F1321]" command. This returns
  • TASCAM DA-6400 | TELNET protocol specifications - Page 67
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications DIGITAL REFERENCE LEVEL RETURN This is a return command in response to a "DIGITAL REFERENCE LEVEL PRESET [7F1420]" command. This returns the digital
  • TASCAM DA-6400 | TELNET protocol specifications - Page 68
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications TAKE RENAME ACKNOWLEDGE This is a return command in response to a "TAKE RENAME [7F4200]" command. This is returned at the start of
  • TASCAM DA-6400 | TELNET protocol specifications - Page 69
    TASCAM DA-6400/DA-6400dp TELNET protocol specifications DATE Apr. 26, 2016 DOC Ver. 1.00 First edition issued CONTENTS 69 TEAC Corporation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
TASCAM DA-6400/DA-6400dp
CONTROL I/O connector
TELNET protocol specifications
Ver. 1.00
April 2016
TEAC Corporation