TASCAM DM-24 Installation and Use EPROM Replacement Instructions
TASCAM DM-24 Manual
View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
TASCAM DM-24 manual content summary:
- TASCAM DM-24 | Installation and Use EPROM Replacement Instructions - Page 1
..... TASCAM TEAC Professional Division . 7733 Telegraph Road .. Montebello, CA 90640 . Phone (323) 726-0303 ... Fax (323) 727-7632 INSTALLATION INFORMATION DM-24 V2.0 software upgrade. Installation procedure. 1. Turn the power off and remove the power cable from the wall socket before starting - TASCAM DM-24 | Installation and Use EPROM Replacement Instructions - Page 2
TASCAM TEAC Professional Division 7733 Telegraph Road Montebello, CA 90640 Phone (323) 726-0303 Fax (323) 727-7632 INSTALLATION INFORMATION 2. Raise the unit's top cover by removing 15 cover screws. (See Ex. 1) 5 SCREWS (LEFT SIDE) 5 SCREWS (RIGHT SIDE) 5 SCREWS (REAR) Ex. 1 - TASCAM DM-24 | Installation and Use EPROM Replacement Instructions - Page 3
TASCAM TEAC Professional Division 7733 Telegraph Road Montebello, CA 90640 Phone (323) 726-0303 Fax (323) 727-7632 INSTALLATION INFORMATION 3. Detach the armrest by removing the 3 - TASCAM DM-24 | Installation and Use EPROM Replacement Instructions - Page 4
TASCAM TEAC Professional Division 7733 Telegraph Road Montebello, CA 90640 Phone (323) 726-0303 Fax (323) 727-7632 INSTALLATION INFORMATION 5. Looking into the unit from the rear right side, you will see the (3) I.C.'s to be replaced. (See Ex. 4) PANEL U31 MAIN U7 MAIN U6 The EPROM can be - TASCAM DM-24 | Installation and Use EPROM Replacement Instructions - Page 5
TASCAM TEAC Professional Division 7733 Telegraph Road Montebello, CA 90640 Phone (323) 726-0303 and installed exactly as shown in the following photos. REMOVAL One hand is providing support to the PCB while the other removes the locking device To keep the PCB from flexing and possibly cracking, - TASCAM DM-24 | Installation and Use EPROM Replacement Instructions - Page 6
TASCAM TEAC Professional Division 7733 Telegraph Road Montebello, CA 90640 Phone (323) 726-0303 Fax (323) 727-7632 INSTALLATION INFORMATION Remove the EPROM by placing the - TASCAM DM-24 | Installation and Use EPROM Replacement Instructions - Page 7
TASCAM TEAC Professional Division 7733 Telegraph Road Montebello, CA 90640 Phone (323) 726-0303 Fax (323) 727-7632 INSTALLATION INFORMATION INSTALLATION Holding the EPROM firmly and parallel to the PCB, place the EPROM STRAIGHT down into the socket. Once again, provide support to the PCB while - TASCAM DM-24 | Installation and Use EPROM Replacement Instructions - Page 8
TASCAM TEAC Professional Division 7733 Telegraph Road Montebello, CA 90640 Phone (323) 726-0303 Fax (323) 727-7632 INSTALLATION INFORMATION 6. Confirm the new software version by simultaneously holding down the "2 ND F.", "HIGH" (E.Q.) and the " - " (LIBRARY) buttons while powering on the DM-24 - TASCAM DM-24 | Installation and Use EPROM Replacement Instructions - Page 9
TASCAM TEAC Professional Division 7733 Telegraph Road Montebello, CA 90640 Phone (323) 726-0303 Fax (323) 727-7632 INSTALLATION Ex. 6) CURSOR KEYS ENTER KEY 8. Secure the unit by reversing steps 1,2,3 and 4. Ex. 6 9. Return the old EPROMs to TASCAM using the pre-addressed envelope. - TASCAM DM-24 | Installation and Use EPROM Replacement Instructions - Page 10
addressed to the following location in the following manner. TEAC AMERICA, Inc. (Factory Service) ATTN: DM-24 Upgrade Program 7733 Telegraph Road Montebello, CA 90640 For Labor estimate or status, please contact Factory Service. (323) 727-7627 or e-mail to: [email protected] 2. IF ELECTING TO
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . .
INSTALLATION
INFORMATION
DM-24 V2.0 software upgrade
.
Installation procedure.
1.
Turn the power off and remove the power cable from the wall socket before starting the
installation.
TASCAM
TEAC Professional Division
7733 Telegraph Road
Montebello, CA
90640
Phone (323) 726-0303
Fax (323) 727-7632