TASCAM DM-24 Application-Specific Documents DM-24 with Digital Performer
TASCAM DM-24 Manual
View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
TASCAM DM-24 manual content summary:
- TASCAM DM-24 | Application-Specific Documents DM-24 with Digital Performer - Page 1
connected to your MIDI interface properly. Then make sure that you have made the proper settings in Free MIDI or OMS for the DM-24. This example shows the DM-24 connected to a Digi 001 as the MIDI interface. As a device: Manuf: Mackie Model: other Device ID: 0 Name HUI Receives MTC is checked Is - TASCAM DM-24 | Application-Specific Documents DM-24 with Digital Performer - Page 2
, choose TRANSMIT SYNC. This will allow you to sent MTC to your DM-24 MIDI input port. This is needed if you wish to use the DM-24 internal automation. If not, ignore this setting. In Digital Performer under BASICS, choose CONTROL SURFACE SETUP. Make sure you make the proper settings for your MIDI - TASCAM DM-24 | Application-Specific Documents DM-24 with Digital Performer - Page 3
On the DM-24 EXTERNAL CONTROL page. Add HUI EMULATE under the supported devices list. On the MACHINE CONTROL page also add HUI EMULATE. Make sure your settings are as such: ID 01 TRA checked and REC 1-8. On the OPTION-SYNC/TC page choose SYNC SOURCE and MIDI IN MTC. This allows the DM-24 automation - TASCAM DM-24 | Application-Specific Documents DM-24 with Digital Performer - Page 4
On the DM-24 EXTERNAL CONTROL page use the cursor to point to the JUMP TO SCREEN icon and press ENTER. This will take you to the HUI control screen. - TASCAM DM-24 | Application-Specific Documents DM-24 with Digital Performer - Page 5
settings for all channels viewed on the encoders on the LCD screen. Press ENTER and PAN will flash. This simply removes PAN control from the POD knobs. Moves made with the HUI emulation are recorded in Pro Tools automation, NOT with the DM-24 automation. MTC sent from Pro Tools is used to trigger
DM-24 HUI emulation with Digital Performer
Make sure that your DM-24 MIDI I/O is connected to your MIDI interface
properly.
Then make sure that you have made the proper settings in Free MIDI
or OMS for the DM-24.
This example shows the DM-24 connected to a Digi 001
as the MIDI interface.
As a device:
Manuf: Mackie
Model: other
Device ID: 0
Name HUI
Receives MTC is checked
Is Controller is checked
Receives on CH 1