TASCAM MD-CD1MKIII mkIII Release Notes V1.06
TASCAM MD-CD1MKIII Manual
 |
View all TASCAM MD-CD1MKIII manuals
Add to My Manuals
Save this manual to your list of manuals |
TASCAM MD-CD1MKIII manual content summary:
- TASCAM MD-CD1MKIII | mkIII Release Notes V1.06 - Page 1
to update the unit, then there is no need to update the firmware. 5 After you have confirmed the firmware version, turn the power off. D01157720D TASCAM MD-CD1MKIII/MD-CD1BMKIII 1 - TASCAM MD-CD1MKIII | mkIII Release Notes V1.06 - Page 2
MD-CD1@$/MD-CD1B@$ Release Notes Firmware update procedures Prepare a blank CD-R or CD for both the MD-CD1MKIII and the MD-CD1BMKIII. Use the same file for either model. Download the latest firmware (example: mdcd1mk3_ver1.02.zip for V1.02) from the TASCAM website (http://tascam.com/), and
-
1 -
2
 |
 |
TASCAM MD-CD1MKIII/MD-CD1BMKIII
1
Updates
Always use the most recent firmware for this device.
Please visit the TASCAM web site at http://tascam.com/ to
check for the latest firmware.
Maintenance items
V1.06 fix
•
When the MD auto cue function was on, if you pressed
the READY button while the MD was loading or the
“TOC Reading” message was displayed, the MD would
erroneously start playing. This has been fixed.
V1.04 fix
•
With an MD, if single playback mode and auto cue
functions were on, pressing the READY button when
stopped without a track selected could cause playback
to start. This has been fixed.
V1.03 fixes
•
In order to prevent misoperation, program deletion can
now only be executed when playback is stopped.
•
When ejecting an MD, the repeat setting would be
forgotten. This has been fixed.
•
The precision of the MD auto cue function has been
improved.
•
Operation stability has been improved.
V1.02 fixes
•
Synchronized recording did not work properly in some
cases. This has been fixed.
•
If auto ready, auto cue and program playback functions
were used in combination, the wrong track could be
played back in some cases. This has been fixed.
•
Operation stability has been improved.
Confirming the firmware version
Before beginning to update the firmware, check the
version of the firmware used by your MD-CD1MKIII/
MD-CD1BMKIII.
1
While pressing and holding the CD OPEN/CLOSE
button and MD EJECT button, turn the unit’s power
on. Continue pressing the buttons until
Test
Mode
appears on the screen.
Test Mode
2
Press the unit’s MULTI JOG dial and confirm that
DISPLAY CHK
appears on the display.
DISPLAY CHK
3
Turn the MULTI JOG dial to select
VERSION CHK
and press the MULTI JOG dial.
VERSION CHK
4
SYS Ver01.00
appears on the display,
showing the system firmware version.
SYS Ver01.00
If the system firmware version shown here is the
same or newer than the version that you plan to
use to update the unit, then there is no need to
update the firmware.
5
After you have confirmed the firmware version,
turn the power off.
MD-CD1@$/MD-CD1B@$
Release Notes
D01157720D