TEAC GB-10 GB-10 owners manual

TEAC GB-10 Manual

Get TEAC GB-10 PDF manuals and user guides View all TEAC GB-10 manuals
Add to My Manuals
Save this manual to your list of manuals

TEAC GB-10 manual content summary:

  • TEAC GB-10 | GB-10 owners manual - Page 1
    GB-10 Guitar & Bass Trainer/Recorder This device has a serial number located on the bottom panel. Please record it and retain it for your records. Serial number OWNER'S MANUAL D01128320B
  • TEAC GB-10 | GB-10 owners manual - Page 2
    the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Declaration of Conformity Model Number: Trade Name: Responsible party: Address: Telephone number: GB-10 TASCAM TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California
  • TEAC GB-10 | GB-10 owners manual - Page 3
    Install in accordance with the manufacturer's instructions. 8 Do not install near any product uses batteries (including a battery pack or installed batteries), they should problems with this product, contact TEAC for a service referral. Do not use the product until it has been repaired. TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 4
    and replace batteries. • Remove the batteries if you do not plan to use the unit for a long time. Batteries could rupture or leak, causing fire, injury or stains around them. If the battery fluid leaks, wipe away any fluid on the battery compartment before inserting new batteries. 4 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 5
    IMPORTANT SAFETY INSTRUCTIONS TASCAM GB-10 5
  • TEAC GB-10 | GB-10 owners manual - Page 6
    Parts 23 Top panel 23 Left side panel 29 Right side panel 29 Rear panel 30 Bottom panel 30 Home Screen 31 Recording batteries 40 Using USB bus power 40 Using an AC adaptor (sold separately 41 Startup and shutdown 42 Turning the power on 42 Setting the power to standby 42 6 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 7
    guitar or a bass 44 5-Recording 45 Setting the location where recorded files are saved.......... 45 Adjusting the input level 45 Recording 46 Recording a few seconds before pushing the record button (pre-recording 46 Recording )......66 Changing the speed 66 Changing the key 66 TASCAM GB-10 7
  • TEAC GB-10 | GB-10 owners manual - Page 8
    power off time 80 Adjusting the display contrast 80 Setting the battery type 80 Restoring the default values (factory settings 81 Using QUICK Troubleshooting 93 21-Specifications 95 Ratings 95 Input ratings 95 Analog audio input 95 output ratings 95 Analog output ratings 95 8 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 9
    Control input/output ratings 95 Audio performance 96 Computer compatibility 96 Other specifications 97 Dimensional drawings 97 Table of Contents TASCAM GB-10 9
  • TEAC GB-10 | GB-10 owners manual - Page 10
    SD card. This unit can use either alkaline or nickel-metal hydride (NiMH) batteries. It cannot recharge batteries. Formatting is necessary if you insert a new SD card. (Formatting will erase all the data on the card.) For details, see "Inserting and removing SD cards" on page 37. 10 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 11
    unit with a computer using the included USB cable. computer USB Quick Start Guide Using an AC adaptor (sold separately) Connect a TASCAM PS-P520 AC adaptor (sold separately), which is designed for the specifications of about power preparations, see "Powering the unit" on page 40. TASCAM GB-10 11
  • TEAC GB-10 | GB-10 owners manual - Page 12
    procedures to dismount the GB-10 drive from your computer, disconnect the USB cable. The unit should automatically turn off. For details, see Chapter 11 "Transferring songs to and from a computer" on page 72. ªª Connect a guitar or bass Connect a guitar or bass to the unit's GUITAR IN jack using
  • TEAC GB-10 | GB-10 owners manual - Page 13
    4: Tune the instrument Use the unit's tuning function to tune a connected guitar or bass. Press the TUNER button to open the TUNERscreen. Quick Start Guide Step 5: Use the effects This unit has built-in effects that you , see Chapter 12 "Using the built in effects" on page 74. TASCAM GB-10 13
  • TEAC GB-10 | GB-10 owners manual - Page 14
    Quick Start Guide Step 6: guitar input level Use the INPUT level dial on the right side panel to adjust the GUITAR IN input level. NOTE The BALANCEsetting only affects the volume when G.IN is ON ( ). When G.IN is OFF ( ), changing the BALANCE value has no effect on the volume. 14 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 15
    Quick Start Guide Step 7: Play along with the music This unit will output the sound of a connected guitar even when recording is not enabled. This allows you to play along on your guitar or bass just by selecting the setting, press the HOME button to return to the Home Screen. TASCAM GB-10 15
  • TEAC GB-10 | GB-10 owners manual - Page 16
    [-] button to enable the pre-record function and put the unit into recording standby. Press the RECORD [-] button to start recording, capturing sound up to 2 seconds before pressing the button. Press the [ª] button to stop recording. For details, see "Recording" on page 46. 16 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 17
    Guide Step 9: Record over a song (overdub) Step 10: Use other functions You can also record your performance together with the music that is playing back. Use the  and ¯ buttons to select the song. Press the Á button while pressing and holding the RECORD shutdown screen appears. TASCAM GB-10 17
  • TEAC GB-10 | GB-10 owners manual - Page 18
    1-Introduction Thank you very much for purchasing the TASCAM GB-10 Guitar & Bass Trainer/Recorder. Please read this Owner's Manual carefully in order to maximize your use of all the unit's features. We hope that you will enjoy using this trainer/ recorder for many years to come. Please keep a copy
  • TEAC GB-10 | GB-10 owners manual - Page 19
    1 •• AA alkaline battery 2 •• USB cable (0.8 m 1 •• A warranty card 1 •• Owner's manual (this manual 1 About this manual In this manual, we use the following CAUTION Instructions that should be followed to avoid injury, damage to the unit or other equipment, and loss of data. TASCAM GB-10 19
  • TEAC GB-10 | GB-10 owners manual - Page 20
    of such data and/or information and not as the specifications for such data and/or information. TEAC Corporation disclaims any warranty that any use of such data and/or information shall be free from infringement connected with or related to the use of such data and/or information. 20 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 21
    SD cards This unit uses SD cards for recording and playback. You can use 64 MB-2 GB SD cards and 4 GB-32 GB SDHC cards with this unit. A list of SD cards that have been tested with this unit can be found on the TASCAM web site (www.tascam.com/). Use of cards that have not
  • TEAC GB-10 | GB-10 owners manual - Page 22
    unit with a chemically treated cloth or substances such as benzene, thinner and alcohol because they might cause damage to the surface of the unit. 22 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 23
    2 - Names and Functions of Parts Top panel 1 Display This shows a variety of QUICK DELETEpop-up menu. ¶/ button (DOWN/GUITAR INPUT) When the Home Screen is open, press this button to turn the input from the GUITAR IN jack ON/OFF. When one of the the beginning of the previous file. TASCAM GB-10 23
  • TEAC GB-10 | GB-10 owners manual - Page 24
    2-Names and Functions of Parts When one of the setting screens is . On the BROWSEscreen, press this to enter the lower folder level. Press during recording to start recording to a new file without interruption (track incrementation). 4 Ô button (REW) Press put the unit into standby. 24 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 25
    2-Names and Functions of Parts 7 Á button (PLAY) When the Home Screen maximum) and start recording standby. When in recording standby, the indicator blinks. Press during recording standby to start recording. When recording, the indicator Home Screen from one of the setting screens. TASCAM GB-10 25
  • TEAC GB-10 | GB-10 owners manual - Page 26
    2-Names and Functions of Parts w Trainer buttons In addition to the MENU button, which opens the MENU screen, this section has seven buttons that allow the speed" on page 66. For details, see "Changing the key" on page 66. t TUNER button Press to tune the connected guitar/bass. 26 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 27
    2-Names and Functions of Parts First, set the tuner mode to AUTOor OSCusing the [ª]button (AUTO) and Á button (OSC). Then, press the TUNER button again and only affects the volume when G.IN is ON ( ). When G.IN is OFF ( ), changing the BALANCE value has no effect on the volume. TASCAM GB-10 27
  • TEAC GB-10 | GB-10 owners manual - Page 28
    2-Names and Functions of Parts o METRONOME button Press to use the metronome. Press this ending point) and start loop playback. Press briefly again to turn the loop playback function OFF. 28 TASCAM GB-10 When the playback area is set to playlist, press and hold this button to show the loop screen.
  • TEAC GB-10 | GB-10 owners manual - Page 29
    playback with the playlist" on page 69. Left side panel 2-Names and Functions of Parts Right side panel a USB port Use this port to connect the unit to a computer of the GUITAR IN jack signal. g GUITAR IN jack Use this standard mono 6.3-mm (1/4") jack to connect a guitar or bass. TASCAM GB-10 29
  • TEAC GB-10 | GB-10 owners manual - Page 30
    2-Names and Functions of Parts Rear panel Bottom panel h DC IN 5V jack Connect a TASCAM PS-P520 AC adaptor (sold separately), which is designed for the power requirements of this unit. j Battery compartment cover 30 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 31
    and Functions of Parts k Battery compartment Install batteries (2 AA) in this compartment to power the unit. (See "Using AA batteries" on page ON 5 GUITAR input ON/OFF status This shows whether input through the GUITAR IN jack is ON or OFF. : GUITAR input OFF : GUITAR input ON TASCAM GB-10 31
  • TEAC GB-10 | GB-10 owners manual - Page 32
    status Depending on the recorder operation status, one of the following icons appears. Stopped Paused Playing back Searching forward Searching backward Skipping to the beginning of the next file Skipping to the beginning of the previous file 32 TASCAM GB-10 8 Playback position This bar
  • TEAC GB-10 | GB-10 owners manual - Page 33
    Functions of Parts Recording screen When recording or when in recording standby, record function status When prerecording is enabled and the unit is in recording standby, "PRE"( ) appears here. When the auto record function is enabled and the unit is recording, "A.REC" ( )appears here. TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 34
    Parts 3 Key adjustment status This shows whether key adjustment is ON or OFF. Key adjustment is disabled during recording : Key adjustment OFF 4 Recorder operation status Depending on the recorder operation status, one of the following icons appears. ª Recording 83. See on page 80. 34 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 35
    change the repeat function. 1. Press the MENU button to open the MENU screen. 2-Names and Functions of Parts 4. Use the VALUE (+/-) buttons to change the setting. 2. Use the §/BROWSE and ¶/ buttons to select "∑" and the setting value appears as light letters on a dark background.) TASCAM GB-10 35
  • TEAC GB-10 | GB-10 owners manual - Page 36
    2-Names and Functions of Parts Basic operations Use the following buttons to use TASCAM GB-10 §/BROWSE and ¶/ buttons Use this button to move the cursor (change the highlighted item) and to change the value of the selected item. VALUE (+/-) buttons Use to change value of the selected item. RECORD
  • TEAC GB-10 | GB-10 owners manual - Page 37
    remove them. 2. Insert the SD card into the SD card slot in the back of the battery compartment in the direction shown in the illustration until it clicks into the place. 3. Insert the card and close the cover. If you are using batteries, insert them first before closing the cover TASCAM GB-10 37
  • TEAC GB-10 | GB-10 owners manual - Page 38
    www.tascam. com/). 3. Press the Á button to start formatting. Remove the SD card if you do not wish to format it. CAUTION Formatting will erase all the data on the card. 4. After formatting completes, the Home Screen opens. You can also reformat a card with this unit at any time. 38 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 39
    slide the protect switch to the "LOCK" position, file recording and editing will not be possible. Move the switch to the unlocked position in order to record,erase and otherwise edit data on the card. In this case, press the Á button to format the card again. Card write protection TASCAM GB-10 39
  • TEAC GB-10 | GB-10 owners manual - Page 40
    recharger. •• The included alkaline batteries are provided for confirming the operation of the unit and might not last very long. Using USB bus power Connect the unit with a computer using the included USB cable as shown in the illustration below. computer USB 40 TASCAM GB-10 The USB SELECT screen
  • TEAC GB-10 | GB-10 owners manual - Page 41
    separately), because it is designed for the power requirements of this unit. Use of a different adaptor could cause malfunction, fire or electric shock. NOTE If batteries are installed and the AC adaptor is connected, power will be supplied from the AC adaptor. TASCAM GB-10 41
  • TEAC GB-10 | GB-10 owners manual - Page 42
    until the "TASCAM GB-10" startup screen opens. The Home Screen opens after the unit completes startup. ® [startup screen] [Home Screen] Setting the power to standby When the power is ON, press and hold the [ª] button until the "GUITAR & BASS TRAINER/RECORDER" screen appears. 42 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 43
    " and press the Á button. "USB connected" pop-up screen appears on the screen. (Select "BUS POWER" to power the unit from the computer USB bus.) TASCAM GB-10 43
  • TEAC GB-10 | GB-10 owners manual - Page 44
    to dismount the "GB-10" drive from your computer, disconnect the USB cable. The unit should automatically turn off. Please refer to the operation manual for your computer system for instructions about the correct procedures for dismounting an external drive. Connecting a guitar or a bass You can
  • TEAC GB-10 | GB-10 owners manual - Page 45
    as possible without making the PEAK indicator light red. CAUTION In order to hear the sound that you are recording through the GUITAR IN jack, the G.IN icon ( ) must appear highlighted (lights letters on a dark background). If it is not highlighted, press the ¶/ button to enable it. TASCAM GB-10 45
  • TEAC GB-10 | GB-10 owners manual - Page 46
    recorded starting up to 2 seconds before the button was pushed. The RECORD [º] button indicator lights when recording. 3. Press the [ª] button to stop recording. To pause recording, press the RECORD [º] button. To resume recording to the same file, press the RECORD [º] button again. 46 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 47
    an already recorded file being played back to record a new file. For example, you could record a new guitar part over an existing track. NOTE •• When overdubbing, You cannot use the auto-record or manual file is from "0" (minimum) to "20" (maximum), and the default value is "20". TASCAM GB-10 47
  • TEAC GB-10 | GB-10 owners manual - Page 48
    file being recorded. 6. Press the [ª] button to stop recording. Starting and pausing recording automatically (AUTO REC) This unit can be set to automatically start and pause recording in response pop-up message appears. 48 TASCAM GB-10 3. Use the §/BROWSE and ¶/ buttons to select the MODE item.
  • TEAC GB-10 | GB-10 owners manual - Page 49
    usual, pressing the RECORD [º] button briefly does not start recording, but does put the unit into recording standby. 9. You can press the [ª] button if you want to stop a recording that has started automatically. CAUTION When overdubbing, the auto-recording function cannot be used. TASCAM GB-10 49
  • TEAC GB-10 | GB-10 owners manual - Page 50
    hours or more, it will be displayed as 23:59:59. Dividing files (DIVIDE) You can split a recorded file into two files at any position you like. 1. Use the  button, ¯ button, or BROWSEscreen to select the file that you want to divide. 2. Press the MENU button to open the MENUscreen. 50 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 51
    open the DIVIDEscreen. 4. Use the Ô and  button to determine where the file will be divided, and press the RECORD [º] button. The following pop-up message appears. 5. Press the Á button to divide the file. Press the [ª] name that would be given to a new file created by division. TASCAM GB-10 51
  • TEAC GB-10 | GB-10 owners manual - Page 52
    are estimates. They might differ depending on the SD/SDHC card being used. •• The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card. •• This unit only records in 44.1 kHz, 16-bit WAV format. 52 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 53
    on the BROWSEScreen have the following meanings. MUSIC folder ( ) The MUSIC Folder is the highest (root) level folder in the hierarchy shown on the BROWSEScreen. TASCAM GB-10 53
  • TEAC GB-10 | GB-10 owners manual - Page 54
    to cancel deletion. Use the §/BROWSE and ¶/ buttons to select the desired item, and press the Á button to execute one of the following operations. 54 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 55
    in the folder. This folder becomes the new playback area regardless of the previous playback area setting. When recording, files are created in the folder selected using this operation. Press the Á button to create a the "Layer too Deep" message appears and the folder is not made. TASCAM GB-10 55
  • TEAC GB-10 | GB-10 owners manual - Page 56
    , press and hold the §/BROWSE button to open the QUICK DELETEscreen. 2. Press the Á button again to confirm deletion, or press the [ª] button to cancel. 56 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 57
    and that contains audio files that the unit can playback. NOTE SD cards that have been formatted by a TASCAM DR series device can also be used with this unit. Playback When the unit is stopped, press the Á "π" icon appears when playback is stopped in the middle of a track (paused). TASCAM GB-10 57
  • TEAC GB-10 | GB-10 owners manual - Page 58
    bottom of the display. NOTE If you turn the guitar input off, the playback level returns to its original level. If the guitar input is on, and you have used the BALANCE button be lower than it was when recording. In this case, use the BALANCE button to set "BALANCE" to its maximum. 58 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 59
    balance between the input sound of a connected guitar or bass being played and the playback sound of a guitar input off ( level meter area. ), "[OFF]" appears in the When the guitar input is off, the BALANCE setting is canceled and the playback level returns to its original setting. TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 60
    files in the playlist. (See "Playlist" on page 63.) If you select this, but there is no playlist defined, a "No PLAYLIST" pop-up appears. 60 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 61
    left of the Home Screen. 2. Use the §/BROWSE and ¶/ buttons to select the desired folder (light on dark). For instructions about using the BROWSEscreen, see "BROWSE screen navigation" on page 53. 3. Press the Á button to open the pop-up menu shown below. Playback area indication TASCAM GB-10 61
  • TEAC GB-10 | GB-10 owners manual - Page 62
    of that folder. 4. Use the §/BROWSE and ¶/ buttons to select the desired file (light on dark). For instructions about using the BROWSEscreen, see "BROWSE screen navigation" on page 53. 5. Press the Á button to open the playback area regardless of the previous playback area setting. 62 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 63
    MENU button to open the MENUscreen. 2. Use the §/BROWSE and ¶/ buttons to select the "PLAYLIST" menu item, and press the Á button to open the PLAYLISTscreen. TASCAM GB-10 63
  • TEAC GB-10 | GB-10 owners manual - Page 64
    is removed from the playlist, but it is not erased from the SD card. CAUTION No confirmation pop-up message appears before this operation. 64 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 65
    3rd position. 2. Press the Á button to complete the movement and return to the ordinary PLAYLIST screen. (The file number no longer appears light on dark.) TASCAM GB-10 65
  • TEAC GB-10 | GB-10 owners manual - Page 66
    You can use these playback control functions for effective practice and learning new parts. When the "SPEED" is set from x0.5-x0.9, the shown, original speed in 10% increments (default value: "x1.0"). KEY can be set in a range of ±6 semitones (â6-ã6). (The default value is "0".) 66 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 67
    light on dark). Use this to adjust the pitch up or down in cents (100 cents = 1 semitone) in a range of ±50. (The default value is 10 seconds, in one-second intervals. (Default value: "2" seconds) 6. After completing the setting, press the HOME button to return to the Home Screen. TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 68
    (VBR) MP3 files. Using loop playback (standard mode) Use this function to continuously repeat playback (loop) part of a file that you select. 1. During playback (or when paused), press the LOOP button to set the desired position. Press the  button to save the IN (starting) point. 68 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 69
    10-Loop Playback/Repeat Playback/Single Track Playback NOTE •• When the LOOP SETpop-up window is open, press the Á button to playback, press [ª]button area at the bottom of the display. The word "LOOP" is followed by a number. Use the VALUE (+/-) buttons to set the number to 1-5. TASCAM GB-10 69
  • TEAC GB-10 | GB-10 owners manual - Page 70
    10-Loop Playback/Repeat Playback/Single Track Playback 2. Press and hold the LOOP button to open the "LOOP SET" pop-up. •• Press the [ª] button during briefly to start loop playback. Turning loop playback on and off Press the LOOP button briefly to turn loop playback ON or OFF. 70 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 71
    10-Loop Playback/Repeat Playback/Single Track Playback When you want to restart loop playback, press the LOOP button briefly to start loop playback if it is in a different mode. 3. Use the §/BROWSE and ¶ / buttons to select the "REPEAT" item, and use the VALUE (+/-) buttons to set TASCAM GB-10 71
  • TEAC GB-10 | GB-10 owners manual - Page 72
    from a computer You can transfer audio files from a computer by USB, and play them back for practice, to learn new parts and to overdub. Moreover, this unit can play back MP3 (32-320 kbps, 44.1 kHz) and WAV (44.1 kHz this unit can handle (the MP3 and WAV files types listed above). 72 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 73
    (Please refer to the operation manual for your computer system for instructions about the correct procedures for 10/01 00:00:00). As a result, when a list of the files is viewed on a computer, arranging them in order of date and time will probably not show them in the order recorded. TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 74
    applied to the input signal during both practice and recording. Turning the effects ON and OFF Press the 10 factory presets (PRESET 01-10) and 10 user settings (USER 01-10). AMP tab Setting the effect Press and hold the EFFECT button to open the EFFECT screen. 74 TASCAM GB-10 Make guitar/bass
  • TEAC GB-10 | GB-10 owners manual - Page 75
    shown indicate the number of speakers and the speaker diameter simulated. For example, "4x10" indicates four 10-inch speakers. REVERB Adjust the volume of the reverberation. CMP tab Make compressor settings on this tab. of the compressor. ON/OFF This turns this effect on and off. TASCAM GB-10 75
  • TEAC GB-10 | GB-10 owners manual - Page 76
    on this tab to allow easy access to them in the future. Use the VALUE (+/-) buttons to select the user preset number (USER 01-USER 10). Press the Á button to save the current settings to the selected user preset number. 76 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 77
    options are AUTO ( [ª] : chromatic tuner mode) and OSC. (Á : oscillator mode). After selecting the mode, press the TUNER button again to make settings for that mode. TASCAM GB-10 77
  • TEAC GB-10 | GB-10 owners manual - Page 78
    the signal of the instrument that you want to tune.The name of the closest pitch appears in the upper part of the meter. 2. Tune the instrument until the desired pitch is shown and the center of the meter OSC LEVEL Set the output level of the tone between 0 and 10 (default value 7). 78 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 79
    volume between 0and 10. The default value is 5. Starting and stopping the metronome When the METRONOMEscreen is open, press the Á button to start or stop the metronome. NOTE When the METRONOMEscreen is open, press the HOME button to stop the metronome and return to the Home Screen. TASCAM GB-10 79
  • TEAC GB-10 | GB-10 owners manual - Page 80
    Use the VALUE (+/-) buttons to change the setting value. 80 TASCAM GB-10 Setting the forward/backward search speed Use the CUE/REV SPEEDitem to automatically turns OFF after the last activity or operation when powered by the internal battery. Options: "OFF" (Default value), "3min", "5min", "10min",
  • TEAC GB-10 | GB-10 owners manual - Page 81
    QUICK FORMAToption. 1. Use the §/BROWSE and ¶/ buttons to select "FULL FORMAT" ("Exec" appears light on dark). 2. Press the Á button to open a confirmation pop-up window. TASCAM GB-10 81
  • TEAC GB-10 | GB-10 owners manual - Page 82
    that the batteries are sufficiently charged. If the power fails during formatting, the formatting might not occur correctly. Changing the file name prefix You can change the prefix for names given to files recorded by this characters can be used The default name prefix is "GB0000". 82 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 83
    open the FOOT SWscreen. 4. Use the VALUE (+/-) buttons to change the "MODE" item. MODE PLAY TRAINER EFFECT RECORD MINUTES L REW FLASH PRESET − OVERDUB REW FOOT SW C R PLAY/STOP FWD PLAY/STOP SPEED CHANGE PLAY pedal corresponds to the assignment shown on the FOOT SWscreen. TASCAM GB-10 83
  • TEAC GB-10 | GB-10 owners manual - Page 84
    . If an MP3 file has ID3 tag title information that information appears instead. DATE Shows the date and time that the file was created. 84 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 85
    files in the MUSIC Folder. TOTAL FOLDER Shows the number of folders in the MUSIC Folder. TOTAL SIZE Shows the total SD card memory capacity. TASCAM GB-10 85
  • TEAC GB-10 | GB-10 owners manual - Page 86
    unit's system settings and firmware version. CUE/REV SPD Shows the speed of forward and backward searching. AUTO OFF Shows the automatic power OFF setting. BATTERY This shows the battery setting. System Ver. Shows the system firmware version. 86 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 87
    18-Effect Module Parameters List Guitar and bass effects Module Effect Parameter AMP AMP Has an effect like a guitar amp. GAIN Adjusts gain level MASTER Adjusts the output level TONE Adjusts the speed DEPTH Adjusts depth of volume change OFF/ON Turns effect ON or OFF TASCAM GB-10 87
  • TEAC GB-10 | GB-10 owners manual - Page 88
    sound. TIME F/B Adjusts delay time of effect sound Adjusts volume of repeating sound Higher values increase the repetitions LEVEL Adjusts volume of effect sound 88 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 89
    Supported The audio file is not a supported format. Please see "11-Transferring songs to and from a computer" for file formats that this unit can use. Battery Empty The battery is almost out of power. Replace the AA batteries FAT formatting erases all data currently on the card. TASCAM GB-10 89
  • TEAC GB-10 | GB-10 owners manual - Page 90
    Divide Max File Size File Full Card Error Current File MP3 90 TASCAM GB-10 Meaning and response The FAT formatting of the card is abnormal or broken of a track). The file is larger than the designated size or the recording time exceeded 24 hours. The total number of folders and files exceeds 5000.
  • TEAC GB-10 | GB-10 owners manual - Page 91
    is read only and cannot be erased. No card is in the unit, so recording is not possible. There is no file that can be played back. The file the batteries and disconnect the AC adaptor (if connected). If the error message continues to appear, please contact a TEAC Repair Center. TASCAM GB-10 91
  • TEAC GB-10 | GB-10 owners manual - Page 92
    and response If any of these errors occur, turn the unit power OFF and restart it. If the power cannot be turned OFF, remove the batteries and disconnect the AC adaptor (if connected). If the error message continues to appear, please contact a TEAC Repair Center. 92 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 93
    the connection again. •• Confirm that the recording level is not too low. •• Has guitar input been disabled (G.IN icon light on dark)? not shown •• Confirm that the SD card is not full. •• Confirm that the number of files has not reached the maximum that the unit can handle. TASCAM GB-10 93
  • TEAC GB-10 | GB-10 owners manual - Page 94
    20-Troubleshooting ªª The recording level is low. •• Confirm that the input level setting is not too low. •• Confirm that the output level connected to the computer using its USB port. •• Are you using a USB hub? •• Confirm that the unit is not recording or in recording standby mode. 94 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 95
    media SD card (64 MB - 2 GB) SDHC card (4 GB - 32 GB) Recording format WAV: 44.1kHz, 16-bit playback format WAV: 44.1 kHz, 16/24-bit MP3: 44.1/48 kHz, 32/64/96/128/192/256/320 kbps Number of input channels 1 channel (mono) Input ratings Analog audio input GUITAR IN jack Connector Input impedance
  • TEAC GB-10 | GB-10 owners manual - Page 96
    +1/-5 dB (GUITAR IN to LINE OUT , Fs=44.1kHz) Total harmonic distortion 0.07% (GUITAR IN to LINE OUT , Fs=44.1kHz) S/N ratio 70 dB (GUITAR IN) Computer USB host controller Intel chipset Supported OS Windows : Windows XP , Windows Vista , Windows 7 Macintosh : Mac OS X 10.2 or later 96 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 97
    batteries) Operating temperature range 0 - 40°C/32°F - 104°F Dimensional drawings 158mm 30mm 70mm • Illustrations and other depictions may differ in part from the actual product. • Specifications and external appearance may be changed without notification to improve the product. TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 98
    Notes 98 TASCAM GB-10
  • TEAC GB-10 | GB-10 owners manual - Page 99
    Notes TASCAM GB-10 99
  • TEAC GB-10 | GB-10 owners manual - Page 100
    GB-10 TEAC CORPORATION Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 USA TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
GB-10
Guitar & Bass
Trainer/Recorder
D01128320B
OWNER’S MANUAL
This device has a serial number
located on the bottom panel.
Please record it and retain it for
your records.
Serial number:
__________________