TEAC GT-R1 GT-R1 Manual Addendum v 2.00
TEAC GT-R1 Manual
 |
View all TEAC GT-R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
TEAC GT-R1 manual content summary:
- TEAC GT-R1 | GT-R1 Manual Addendum v 2.00 - Page 1
GT-R1 Addendum List of new functions The following functions were added with firmware version 2.00. 1. Digital meter display on the Home Screen A numerical display has been added to the meters. 2. Special recording functions Track incrementing Pre recording (PRE REC) Record delay (DELAY) File - TEAC GT-R1 | GT-R1 Manual Addendum v 2.00 - Page 2
GT-R1 Addendum Recording delay This function allows the start of recording from the time of pressing the REC/PAUSE key to be delayed 0.3 s (this time is fixed). This is convenient if you want to avoid recording the sound of erased. The file is divided and the Home Screen reopens. 2 TASCAM GT-R1
-
1 -
2
 |
 |
TASCAM GT-R1
1
List of new functions
The following functions were added with firmware version
2.00.
1. Digital meter display on the Home Screen
A numerical display has been added to the meters.
2. Special recording functions
Track incrementing
Pre recording (PRE REC)
Record delay (DELAY)
File division (DIVIDE)
3. New BROWSE screen functions
New file operation (INFO)
New folder operation (ALLDEL)
Additional Home Screen function
Digital display for meters
The maximum level that occurs during a fixed interval is
shown numerically on the Home Screen and Recording
Screen (*).
[Home Screen]
[Recording Screen]
Special functions during recording
Track incrementing
Incrementing the track number manually
During recording, you can create a new file that has
a number at the end of its file name that is one higher
(incremented) and continue recording.
1
Press the
≤
key during recording to create a new
file with the number at the end of the file name
incremented (increased) and continue recording in
this file from its beginning (00H00M00S).
You can increment even when paused.
CAUTION
You cannot increment if the total number of files
•
would exceed 999.
You cannot increment when the current file is only
•
two seconds or shorter.
When incrementing, if a file already exists with the
•
incremented file name, the number will be increased
again to create a new unique file name.
You cannot increment during overdub recording.
•
Automatic track incrementing according to file size
When a file reaches a designated size during recording, you
can set the unit to automatically create a new file with an
incremented file name and continue recording.
1
Press the
MENU
key to open the menu list screen.
Select
REC SETTING
and press the
Á/π
key to
open the
REC SETTING
screen.
2
Use the
SIZE
item to select the file size for
automatic incrementing.
Options: 64M, 128M, 256M, 512M, 1G, 2GB
(default setting)
CAUTION
You cannot increment if the total number of files would
exceed 999.
NOTE
The recording time differs for the same file size depend-
ing on the file format. Moreover, 23:59:59 appears if the
recording time is 24 hours or more.
Pre-recording
When the unit is in recording standby, the unit can record
the two seconds before the start of recording and include it
in the recording.
Use the following procedures to set pre-recording.
1.
Press the
MENU
key to open the menu list screen.
Select
REC SETTING
and press the
Á/π
key to
open the
REC SETTING
screen.
2
Use the
PRE REC
item to turn pre-recording ON
or OFF.
Options: ON, OFF (default setting)
CAUTION
If the unit has been in recording standby for less
•
than two seconds, only the amount of time that the
unit has been in standby will be included
Pre-recording is not possible if the remaining space
•
on the SD card is three seconds or less.
When PRE REC is set to ON, overdub recording
•
cannot be used.
NOTE
Set DELAY to OFF when you set PRE REC
to ON.
GT-R1
Addendum
D01072710A