TEAC HS-4000 HS-4000 V1.22 Release Notes
TEAC HS-4000 Manual
View all TEAC HS-4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
TEAC HS-4000 manual content summary:
- TEAC HS-4000 | HS-4000 V1.22 Release Notes - Page 1
HS-4000 Release Notes Contents Updates 1 New functions 1 V1.22 additions 1 Maintenance items 1 V1.22 fixes 1 Checking the firmware version 2 Firmware update procedures 2 Updates Always use the most recent firmware for this unit. Please visit the TASCAM website (http://tascam.com/) to check - TEAC HS-4000 | HS-4000 V1.22 Release Notes - Page 2
one would cause the TC generator to stop. This has been fixed. 2 TASCAM HS-4000 •• In take mode, if you changed the operation mode when stopped after adding conducting a firmware update, check the firmware version currently installed in your HS-4000. 1 Turn the unit power ON. 2 Press the MENU key on - TEAC HS-4000 | HS-4000 V1.22 Release Notes - Page 3
HS-4000 Release Notes CAUTION If the above screen does not appear, turn the power off once, and then turn the power on again 9 See "Confirming the firmware version" above and confirm that the SYSTEM VERSION (firmware version) is the newest one. This completes updating the unit. 3 TASCAM HS-4000
HS-4000
Release Notes
TASCAM HS-4000
1
D01165720A
Contents
Updates
................................................................................................
1
New functions
...................................................................................
1
V1.22 additions
...........................................................................
1
Maintenance items
..........................................................................
1
V1.22 fixes
.....................................................................................
1
Checking the firmware version
...................................................
2
Firmware update procedures
.......................................................
2
Updates
Always use the most recent firmware for this unit.
Please visit the TASCAM website (http://tascam.com/) to
check for the latest firmware.
Known issues
If you load project that contains a mono folder created
by an HS-P82 or HS-8, some files might not be shown in
on air mode. To avoid this, load a project that does not
contain a mono folder or create a new project for use with
on air mode.
New functions
V1.22 additions
Playback of WAV files that are not BWF format is now
•
supported.
Automatic recognition of external files has been added.
•
Manual locating based on time code time has been
•
added to take and playlist modes.
When a new project or session is created, the take
•
name is reset to the default.
A progress bar has been added when recording in take
•
mode.
When a digital input unlock event is detected, the
•
input signal is no longer muted.
In order to allow you to confirm the status of
•
confidence monitoring on the Home Screen, a
confidence monitoring button (icon) has been added
between the transport icon and the time display on the
Home Screen.
For Playlist mode, changes have been made to the
•
operation of the
ADJUST
screen, and a rehearsal
playback function for audio monitoring has been
added.
Assignment changing has been made possible on the
•
ENTRY
list screen.
The BC$STANDBY/END range can now be changed in
•
one operation.
An on air mode that plays back files in the root folder
•
has been added.
A BC$END operation mode setting has been added.
•
SONY P2 REC commands are now supported.
•
System setting backup and preset memory functions
•
have been added.
ON/OFF settings have been added for Auto Marker
•
PRE
/
REC
/
END
.
The bounce save destination can now be selected.
•
A take copy function has been added.
•
An
•
ETHERNET
page has been added to the
REMOTE
SETUP
screen.
Network functions (FTP/Telnet/VNC) have been added.
•
NOTE
For details, see “New functions added in firmware V1.22”
in the HS-4000 addendum.
Maintenance items
V1.22 fixes
If loading a file fails during playback in timeline mode,
•
playback will continue with silence instead of stopping.
If PreRec was ON and recording was started from “00:00”,
•
recording would stop and a “
RECORD stopped. ABS
time is over 24h
” pop-up message would appear.
This has been fixed.
When recording with the
•
SYNC T/C
screen
SETUP
page
TC GEN MODE
item set to
REGEN
or
JAM SYNC
,
the precision of the start time added to the file at the
time of recording has been increased.
When the
•
SYNC T/C
screen
SETUP
page
TC GEN
MODE
item was set to
TIME OF DAY
, if the unit’s
internal clock was adjusted, the time code generator
did not chase the time after the adjustment. This has
been fixed.
When a PPL file is imported, even if there are
•
mismatched entries (entries with missing files), the
remainder of the entries are now properly registered.
In some cases, marks could not be added to files that
•
had not been created by this unit. This has been fixed.
When reconfirmation pop-up messages for various
•
operations appeared on the
CF Manage
screen, the
physical key bindings were reversed. Pressing the
ENTER
key would cancel the operation, and pressing
the
EXIT/CANCEL
would execute the operation. This
has been fixed.
Pop-up messages would not disappear in some cases.
•
This has been fixed.
In dual playlist mode, when changing operation mode,
•
for example, before the playlists had been saved, saving