TEAC HS-4000 HS-4000 V1.21 Release Notes
TEAC HS-4000 Manual
View all TEAC HS-4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
TEAC HS-4000 manual content summary:
- TEAC HS-4000 | HS-4000 V1.21 Release Notes - Page 1
TASCAM website (http://tascam.com/) to check for the latest firmware. New functions V1.21 additions •• Playback of WAV files that are not BWF format is now supported. •• Automatic recognition of external files has been added. •• Manual V1.21" in the HS-4000 insertion sheet. Maintenance items - TEAC HS-4000 | HS-4000 V1.21 Release Notes - Page 2
playlist mode, if you changed to take mode after adding an entry to player B, the mark list would stop being shown. This has been fixed. 2 TASCAM HS-4000 •• When using BWF/WAV files that had been edited by something other than this unit, if you edited mark information using this unit, marks would - TEAC HS-4000 | HS-4000 V1.21 Release Notes - Page 3
HS-4000 Release Notes CAUTION If the above screen does not appear, turn the power off once, and then turn the power on again 9 See "Confirming the firmware version" above and confirm that the SYSTEM VERSION (firmware version) is the newest one. This completes updating the unit. 3 TASCAM HS-4000
HS-4000
Release Notes
TASCAM HS-4000
1
D01165720A
Contents
Updates
................................................................................................
1
New functions
...................................................................................
1
V1.21 additions
...........................................................................
1
Maintenance items
..........................................................................
1
V1.21 fixes
.....................................................................................
1
Checking the firmware version
...................................................
2
Firmware update procedures
.......................................................
2
Updates
Always use the most recent firmware for this unit.
Please visit the TASCAM website (http://tascam.com/) to
check for the latest firmware.
New functions
V1.21 additions
Playback of WAV files that are not BWF format is now
•
supported.
Automatic recognition of external files has been added.
•
Manual locating based on time code time has been
•
added to take and playlist modes.
When a new project or session is created, the take
•
name is reset to the default.
A progress bar has been added when recording in take
•
mode.
When a digital input unlock event is detected, the
•
input signal is no longer muted.
In order to allow you to confirm the status of
•
confidence monitoring on the Home Screen, a
confidence monitoring button (icon) has been added
between the transport icon and the time display on the
Home Screen.
For Playlist mode, changes have been made to the
•
operation of the
ADJUST
screen, and a rehearsal
playback function for audio monitoring has been
added.
Assignment changing has been made possible on the
•
ENTRY
list screen.
The BC$STANDBY/END range can now be changed in
•
one operation.
An on air mode that plays back files in the root folder
•
has been added.
A BC$END operation mode setting has been added.
•
SONY P2 REC commands are now supported.
•
System setting backup and preset memory functions
•
have been added.
ON/OFF settings have been added for Auto Marker
•
PRE
/
REC
/
END
.
The bounce save destination can now be selected.
•
A take copy function has been added.
•
An
•
ETHERNET
page has been added to the
REMOTE
SETUP
screen.
Network functions (FTP/Telnet/VNC) have been added.
•
NOTE
For details, see “New functions added in firmware V1.21”
in the HS-4000 insertion sheet.
Maintenance items
V1.21 fixes
If loading a file fails during playback in timeline mode,
•
playback will continue with silence instead of stopping.
If PreRec was ON and recording was started from “00:00”,
•
recording would stop and a “
RECORD stopped. ABS
time is over 24h
” pop-up message would appear.
This has been fixed.
When recording with the
•
SYNC T/C
screen
SETUP
page
TC GEN MODE
item set to
REGEN
or
JAM SYNC
,
the precision of the start time added to the file at the
time of recording has been increased.
When the
•
SYNC T/C
screen
SETUP
page
TC GEN
MODE
item was set to
TIME OF DAY
, if the unit’s
internal clock was adjusted, the time code generator
did not chase the time after the adjustment. This has
been fixed.
When a PPL file is imported, even if there are
•
mismatched entries (entries with missing files), the
remainder of the entries are now properly registered.
In some cases, marks could not be added to files that
•
had not been created by this unit. This has been fixed.
When reconfirmation pop-up messages for various
•
operations appeared on the
CF Manage
screen, the
physical key bindings were reversed. Pressing the
ENTER
key would cancel the operation, and pressing
the
EXIT/CANCEL
would execute the operation. This
has been fixed.
Pop-up messages would not disappear in some cases.
•
This has been fixed.
In dual playlist mode, when changing operation mode,
•
for example, before the playlists had been saved, saving
was confirmed for the A and B playlists separately. Now
saving both A and B playlists is confirmed at the same
time.
If you use a
•
e
button on the
PROJECT
screen to load
a project with a different Sampling Rate or Timecode
setting, the values shown for the
Total Time
and the
Take Length
of the session were incorrect. This has
been fixed.