TEAC LR-10 LR-10 owners manual

TEAC LR-10 Manual

Get TEAC LR-10 PDF manuals and user guides View all TEAC LR-10 manuals
Add to My Manuals
Save this manual to your list of manuals

TEAC LR-10 manual content summary:

  • TEAC LR-10 | LR-10 owners manual - Page 1
    LR-10 Instrumental Trainer/Recorder This device has a serial number located on the bottom panel. Please record it and retain it for your records. Serial number OWNER'S MANUAL D01128520B
  • TEAC LR-10 | LR-10 owners manual - Page 2
    servicing) instructions in the literature accompanying the appliance. Declaration of Conformity Model Number: Trade Name: Responsible party: Address: Telephone number: LR-10 TASCAM TEAC installed and used in accordance with the instruction manual, may cause harmful interference to radio
  • TEAC LR-10 | LR-10 owners manual - Page 3
    block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 4
    IMPORTANT SAFETY INSTRUCTIONS ªª Cautions about Batteries This product uses batteries. Misuse of batteries could cause a leak, rupture or other trouble. Always abide by the following precautions when . For more detailed information about disposal of old electrical and electronic 4 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 5
    IMPORTANT SAFETY INSTRUCTIONS equipment, please contact your city office, waste disposal service or the shop where you purchased the equipment. Disposal of batteries and/or accumulators, please contact your city office, waste disposal service or the shop where you purchased them. TASCAM LR-10 5
  • TEAC LR-10 | LR-10 owners manual - Page 6
    Table of Contents IMPORTANT SAFETY INSTRUCTIONS 2 Quick Start Guide 10 Step 1: Prepare the SD card and power 10 Step 2: Copy audio files 19 Main functions and features 19 Included items 20 About this manual 20 Intellectual property rights 21 About SD cards 22 Precautions for 6 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 7
    Overdubbing 52 Starting and pausing recording automatically (AUTO REC 53 Track incrementation 54 Manual track incrementation during recording 54 Automatic track incrementation by file size 55 Dividing (2 66 Playlist 67 Adding files to the playlist 67 Editing the playlist 67 TASCAM LR-10 7
  • TEAC LR-10 | LR-10 owners manual - Page 8
    80 Chromatic tuner mode (AUTO 81 Oscillator mode 81 14-Using the Metronome 82 8 TASCAM LR-10 Setting the metronome 82 Starting and stopping the metronome 82 15-System settings 83 System settings 89 System information page 90 18-Messages 91 19-Troubleshooting 95 20-Specifications 97
  • TEAC LR-10 | LR-10 owners manual - Page 9
    Ratings 97 Input ratings 97 Analog audio input 97 Output ratings 97 Analog output ratings 97 Control input/output ratings 97 Audio performance 98 Computer compatibility 98 Other specifications 98 Dimensional drawings 99 Table of Contents TASCAM LR-10 9
  • TEAC LR-10 | LR-10 owners manual - Page 10
    Quick Start Guide Step 1: Prepare the SD card and power ªª Install the SD card Insert the SD card into the SD card slot, which is inside the you insert a new SD card. (Formatting will erase all the data on the card.) For details, see "Inserting and removing SD cards" on page 39. 10 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 11
    unit with a computer using the included USB cable. Computer USB Quick Start Guide Using an AC adaptor (sold separately) Connect a TASCAM PS-P520 AC adaptor (sold separately), which is designed for the specifications of about power preparations, see "Powering the unit" on page 42. TASCAM LR-10 11
  • TEAC LR-10 | LR-10 owners manual - Page 12
    Quick Start Guide ªª Setting the date and time Use the DATE/TIMEitem from the audio files using the functions of the computer operating system or other computer software applications. 12 TASCAM LR-10 Step 3: Select the input Set INPUTto MICto use the built-in microphone to practice singing or
  • TEAC LR-10 | LR-10 owners manual - Page 13
    If the line input is OFF ( ), press the ¶/MIC button to turn it ON ( ). Quick Start Guide ªª Connect headphones or speakers Connect headphones or a monitoring system (such as powered speakers or an amplifier and speakers) . For details, see Chapter 13 "Using the tuner" on page 80. TASCAM LR-10 13
  • TEAC LR-10 | LR-10 owners manual - Page 14
    Quick Start Guide Step 6: Use the effects This unit has built-in effects. You can use these effects on the input signal and on the playback signal. Press to adjust the built-in microphones and LINE IN input level. For details, see Chapter 12 "Using the built in effects" on page 78. 14 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 15
    Quick Start Guide For details, see "Adjusting the input level" on page 49. ªª Adjusting the mix Press the BALANCE button to adjust the volume of the file the point where you want to stop loop playback to set the OUT point and start loop playback of the interval between the points. TASCAM LR-10 15
  • TEAC LR-10 | LR-10 owners manual - Page 16
    Quick Start Guide Press and hold the LOOP button to open the LOOP SET pop-up screen where you can make fine adjustments to the IN and OUT and gradually increase it as you become more proficient. Press the SPEED button to show the speed setting at the bottom of the display. 16 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 17
    Quick Start Guide Step 10: Record over a song (overdub) Use the VALUE (+/-) buttons to change the setting value. For details, see "Changing the speed" on page 70 , the unit will be put in recording standby with the pre-record function enabled, and overdubbing will not be possible. TASCAM LR-10 17
  • TEAC LR-10 | LR-10 owners manual - Page 18
    Quick Start Guide Step 11: Use other functions This unit has other functions, including a convenient playlist and the ability to divide files, which you can use power To turn the power off (put the unit in standby), press the [ª] button and hold it until the shutdown screen appears. 18 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 19
    1-Introduction Thank you very much for purchasing the TASCAM LR-10 Instrumental Trainer/Recorder. Please read this Owner's Manual carefully in order to maximize your use of all the unit's features. We hope that you will enjoy using this trainer/ recorder for many years
  • TEAC LR-10 | LR-10 owners manual - Page 20
    manual 1 About this manual In this manual, we use the following conventions: •• "SD memory card" is sometimes abbreviated as "SD card." •• The names of keys and controls are given in the following bold typeface: MENU •• Messages shown on the unit's display are written like this: ON 20 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 21
    and supplement. CAUTION Instructions that should be followed to avoid injury, damage to the unit or other equipment, and loss of data. Intellectual property rights •• TASCAM is a trademark of TEAC Corporation, registered in with or related to the use of such data and/or information. TASCAM LR-10 21
  • TEAC LR-10 | LR-10 owners manual - Page 22
    . If you are uncertain about your rights, contact your legal advisor. Under no circumstances will TEAC Corporation be responsible for the consequences of any illegal copying performed using the recorder. About SD Do not put things on top of them or twist them. •• Do not hit them. 22 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 23
    the unit with a chemically treated cloth or substances such as benzene, thinner and alcohol because they might cause damage to the surface of the unit. TASCAM LR-10 23
  • TEAC LR-10 | LR-10 owners manual - Page 24
    and Functions of Parts Top panel 1 Display This shows a variety of information. 2 PEAK indicator This lights if the input signal level is too high. 24 TASCAM LR-10 3 Cursor control Press up to use the §/BROWSE button, down to use the ¶/MIC button, left to use the  button and right to use the
  • TEAC LR-10 | LR-10 owners manual - Page 25
    from the FILE INFORMATIONpop-up message when using the browse function. Press and hold to turn the power ON or put the unit into standby. TASCAM LR-10 25
  • TEAC LR-10 | LR-10 owners manual - Page 26
    + to increase the volume or - to decrease the volume. q HOME button Press to return to the Home Screen from one of the setting screens. 26 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 27
    . For details, see "Changing the speed" on page 70. For details, see "Changing the key" on page 70. t TUNER button Press to tune the instrument. TASCAM LR-10 27
  • TEAC LR-10 | LR-10 owners manual - Page 28
    volume when MIC or LINE is ON ( or ). When MIC or LINE is OFF ( or ), changing the BALANCEvalue has no effect on the volume. 28 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 29
    again to change the IN/OUT point. Use the Á and Ô/ buttons to find the location in the track where you want to set each point. TASCAM LR-10 29
  • TEAC LR-10 | LR-10 owners manual - Page 30
    computer using the included USB cable. (See "Connecting with a computer" on page 46.) s REMOTE jack Connect a TASCAM RC-3F foot switch (sold separately), which is designed for use with this unit, to this 2.5-mm TRS jack stereo 3.5-mm (1/8") mini jack to connect another audio device. 30 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 31
    Rear panel 2-Names and Functions of Parts Front panel h DC IN 5V jack Connect a TASCAM PS-P520 AC adaptor (sold separately), which is designed for the power requirements of this unit. speaker is disabled when headphones are connected, when recording and when in recording standby. TASCAM LR-10 31
  • TEAC LR-10 | LR-10 owners manual - Page 32
    .) z SD card slot Use to insert and remove SD cards. (See "Inserting and removing SD cards" on page 39.) l Battery compartment cover ; Battery compartment 32 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 33
    being operated on battery power, a battery ( ) icon is shown. The amount of remaining battery charge is shown by the number of bars in the icon ( , , ). TASCAM LR-10 33
  • TEAC LR-10 | LR-10 owners manual - Page 34
    remaining, the empty battery ( ) icon blinks. When this happens, the unit will soon switch to standby. When using a TASCAM PS-P520 AC adaptor (sold separately) or USB bus power, the AC ( ) icon is shown. NOTE Even when in the selected folder P.LIST All files added to the playlist 34 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 35
    and the unit is in recording standby, "PRE"( ) appears here. When the auto record function is enabled and the unit is recording, "A.REC" ( )appears here. TASCAM LR-10 35
  • TEAC LR-10 | LR-10 owners manual - Page 36
    (hours: minutes: seconds). 8 Remaining recording time This shows the remaining amount of recording time available (hours: minutes: seconds) on the current SD card 36 TASCAM LR-10 9 Level meter When MIC or LINE is ON ( or volume level of the input signals. When MIC or LINE is OFF ( or here. ), this
  • TEAC LR-10 | LR-10 owners manual - Page 37
    §/BROWSE and ¶/MIC buttons to select the desired setting item. (When selected, the ":" becomes "∑" and the setting value appears as light letters on a dark background.) TASCAM LR-10 37
  • TEAC LR-10 | LR-10 owners manual - Page 38
    . [ª] Button Use to respond "NO" to a pop-up confirmation message. Use this also to return from the FILEINFORMATIONpopup message when using the browse function. 38 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 39
    until it clicks into the place. 3. Insert the card and close the cover. If you are using batteries, insert them first before closing the cover TASCAM LR-10 39
  • TEAC LR-10 | LR-10 owners manual - Page 40
    www.tascam. com/). 3. Press the Á button to start formatting. Remove the SD card if you do not wish to format it. CAUTION Formatting will erase all the data on the card. 4. After formatting completes, the Home Screen opens. You can also reformat a card with this unit at any time. 40 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 41
    insert an SD card that has been formatted by a device other than another LR-10, the FORMAT ERRORscreen will appear. In this case, format the card to use it with this unit. SD cards that have been formatted by a TASCAM DR series device, however, are compatible with this model. •• If the system file
  • TEAC LR-10 | LR-10 owners manual - Page 42
    be powered by two AA batteries, USB bus power or a TASCAM PS-P520 AC adaptor (sold separately). This unit can use either using the included USB cable as shown in the illustration below. computer USB 42 TASCAM LR-10 The USBSELECTscreen appears if the power is ON when you make the USB connection or
  • TEAC LR-10 | LR-10 owners manual - Page 43
    the unit's storage to the computer (STORAGE). 3-Preparation Using an AC adaptor (sold separately) Connect a TASCAM PS-P520 AC adaptor (sold separately), which is designed for the power requirements of this unit, to the connected, power will be supplied from the AC adaptor. TASCAM LR-10 43
  • TEAC LR-10 | LR-10 owners manual - Page 44
    damage speakers or harm your hearing. Turning the power on When the unit is in standby mode, press and hold the [ª] button until the TASCAM LR-10startup screen opens. The Home Screen opens after the unit completes startup. ® Startup Screen Home Screen Setting the power to standby When the power
  • TEAC LR-10 | LR-10 owners manual - Page 45
    format" on page 85.) CAUTION The date and time setting can only be maintained for a few minutes when the unit is not powered by batteries, TASCAM LR-10 45
  • TEAC LR-10 | LR-10 owners manual - Page 46
    minimize the volume. Failure to do so could cause the sudden output of loud sounds, which might lead to hearing damage or other harm. 46 TASCAM LR-10 When connected, the USB SELECTpop-up screen appears on the unit. To exchange data with the computer, use the §/BROWSE or ¶/MIC button to select
  • TEAC LR-10 | LR-10 owners manual - Page 47
    to dismount the LR-10 drive from your computer, disconnect the USB cable. The unit should automatically turn off. Please refer to the operation manual for your computer system for instructions about the to an effect pedal or other device that has a headphones/line level output. TASCAM LR-10 47
  • TEAC LR-10 | LR-10 owners manual - Page 48
    MENUScreen. 2 Use the §/BROWSE and ¶/MIC buttons to select INPUT SETTING, and press the Á or ¯ button to open the INPUT SETTINGscreen. 48 TASCAM LR-10 This screen has the following setting items. Use the §/BROWSE and ¶/MIC buttons to select the desired item. (When selected, the ":" becomes "∑" and
  • TEAC LR-10 | LR-10 owners manual - Page 49
    level. Loud sounds and quiet sounds are both adjusted to the same level. Set it to LMTto have the LR-10 automatically limit the input gain so that input level of loud sounds is reduced to prevent distortion. The factory input level of the built-in microphones or the LINE IN jack. TASCAM LR-10 49
  • TEAC LR-10 | LR-10 owners manual - Page 50
    the [ª] button after pausing to complete the creation of an audio file with the music recorded up to the moment that recording was paused. 50 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 51
    a new file. For example, you could record a new instrument part over an existing track. NOTE •• When overdubbing, You cannot use the auto-record or manual file incrementation functions. •• You cannot pause during overdubbing. (The RECORD [º] button does not respond if pushed.) TASCAM LR-10 51
  • TEAC LR-10 | LR-10 owners manual - Page 52
    the name of the file being recorded. If no file that can be played back has been selected, the following pop-up message appears. 52 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 53
    standby and RECORD [º] button indicator blinks. Press and hold the RECORD [º] button to enable the pre-record function and put the unit into recording standby. TASCAM LR-10 53
  • TEAC LR-10 | LR-10 owners manual - Page 54
    function cannot be used. Track incrementation You can start recording to a new file without interruption manually. If a file reaches the maximum size (2GB), the unit will also automatically start recording . •• When overdubbing, the track incrementation function cannot be used. 54 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 55
    the MENU button to open the MENUscreen. 5. Press the Á button to divide the file. Press the [ª] button to cancel division and return to the DIVIDEscreen. TASCAM LR-10 55
  • TEAC LR-10 | LR-10 owners manual - Page 56
    rather they are the total possible recording times for the SD/SDHC card. •• This unit only records in 44.1 kHz, 16-bit WAV format. 56 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 57
    on the BROWSEScreen have the following meanings. MUSIC folder ( ) The MUSIC Folder is the highest (root) level folder in the hierarchy shown on the BROWSEScreen. TASCAM LR-10 57
  • TEAC LR-10 | LR-10 owners manual - Page 58
    appears to confirm that you want to delete the selected file. Press the Á button to delete the file and the [ª] button to cancel deletion. 58 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 59
    the operation. However, if you try to create a new folder inside a second level subfolder the Layer too Deepmessage appears and the folder is not made. TASCAM LR-10 59
  • TEAC LR-10 | LR-10 owners manual - Page 60
    , press and hold the §/BROWSE button to open the QUICK DELETEscreen. 2. Press the Á button again to confirm deletion, or press the [ª] button to cancel. 60 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 61
    and that contains audio files that the unit can playback. NOTE SD cards that have been formatted by a TASCAM DR series device can also be used with this unit. Playback When the unit is stopped, press the Á π icon appears when playback is stopped in the middle of a track (paused). TASCAM LR-10 61
  • TEAC LR-10 | LR-10 owners manual - Page 62
    , the playback monitoring level will be lower than it was when recording. In this case, use the BALANCE button to set BALANCEto its maximum. 62 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 63
    level meter area. When the MIC/LINE input is off ( or ), the BALANCE setting is canceled and the playback level returns to its original setting. TASCAM LR-10 63
  • TEAC LR-10 | LR-10 owners manual - Page 64
    the files in the playlist. (See "Playlist" on page 67.) If you select this, but there is no playlist defined, a No PLAYLISTpop-up appears. 64 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 65
    of the Home Screen. 2. Use the §/BROWSE and ¶/MIC buttons to select the desired folder (light on dark). For instructions about using the BROWSEscreen, see "BROWSE screen navigation" on page 57. 3. Press the Á button to open the pop-up menu shown below. Playback area indication TASCAM LR-10 65
  • TEAC LR-10 | LR-10 owners manual - Page 66
    file (light on dark). For instructions about using the BROWSEscreen, see "BROWSE screen navigation" on page 57. 5. Press the Á button to open the pop-up menu shown below. 2. Use the §/BROWSE and ¶/MIC buttons to select the desired folder (light on dark). 66 TASCAM LR-10 6. Use the §/BROWSE and
  • TEAC LR-10 | LR-10 owners manual - Page 67
    MENU button to open the MENUscreen. 2. Use the §/BROWSE and ¶/MIC buttons to select the PLAYLISTmenu item, and press the Á button to open the PLAYLISTscreen. TASCAM LR-10 67
  • TEAC LR-10 | LR-10 owners manual - Page 68
    want to remove all the files from the playlist. Press the Á button to remove all the files or the [ª] button to cancel this operation. 68 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 69
    the 3rd position. 2. Press the Á button to complete the movement and return to the ordinary PLAYLISTscreen. (The file number no longer appears light on dark.) TASCAM LR-10 69
  • TEAC LR-10 | LR-10 owners manual - Page 70
    : x1.0). When the SPEEDis set from x0.5-x0.9, the shown, and when it is set from x1.1-x1.5, the shown. icon is icon is 70 TASCAM LR-10 KEY can be set in a range of ±6 semitones (â6-ã6). (The default value is 0.) If you change the key to any value besides 0, the key change function
  • TEAC LR-10 | LR-10 owners manual - Page 71
    cents (100 cents 10 seconds, in one-second intervals. (Default value: 2seconds) 6. After completing the setting, press the HOME button to return to the Home Screen. During playback, press the Á button to use the flashback function. This jumps back a few seconds and continues playback. TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 72
    10-Loop Playback/Repeat Playback/Single Track Playback In ordinary playback mode, unless you do something to stop it, once playback starts, it will Use the and [ª] buttons to move the IN (starting) point to the desired position. Press the  button to save the IN (starting) point. 72 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 73
    10-Loop Playback/Repeat Playback/Single Track Playback NOTE •• When the LOOP SETpop-up window is open, press the Á button to playback, press [ª]button area at the bottom of the display. The word LOOPis followed by a number. Use the VALUE (+/-) buttons to set the number to 1-5. TASCAM LR-10 73
  • TEAC LR-10 | LR-10 owners manual - Page 74
    10-Loop Playback/Repeat Playback/Single Track Playback 2. Press and hold the LOOP button to open the LOOPSET pop-up. •• Press the [ª] button during briefly to start loop playback. Turning loop playback on and off Press the LOOP button briefly to turn loop playback ON or OFF. 74 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 75
    10-Loop Playback/Repeat Playback/Single Track Playback When you want to restart loop playback, press the LOOP button briefly to start loop icon appears on the Home Screen. NOTE If you start loop playback, the REPEATitem automatically switches to OFFif it is in a different mode. TASCAM LR-10 75
  • TEAC LR-10 | LR-10 owners manual - Page 76
    computer 1. Connect the unit to the computer. (See "Connecting with a computer" on page 46.) 2. Click the LR-10 drive that appears on the computer to open it, revealing UTILITY and MUSIC folders. 3. Drag-and-drop the desired can handle (the MP3 and WAV files types listed above). 76 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 77
    cable. (Please refer to the operation manual for your computer system for instructions about the correct procedures for dismounting an on the unit's display. Transferring audio files to a computer 1. Click the LR-10 drive that appears on the computer to open it, revealing UTILITY and MUSIC folders
  • TEAC LR-10 | LR-10 owners manual - Page 78
    Use this to set whether the effect is applied to the input signal (INPUT) or the playback signal (PLAY). The default setting is PLAY. 78 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 79
    space. This reverb is modeled on a studio-like space This is a bright plate reverb. This is a warm plate reverb. 12-Using the built-in effects TASCAM LR-10 79
  • TEAC LR-10 | LR-10 owners manual - Page 80
    guitars and other instruments that have rapid sound decay, in particular, tune the instrument as close to the left built-in microphone as possible. 80 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 81
    the setting items. OSC NOTE Set the pitch of the tuning tone (C3-B5). OSC LEVEL Set the output level of the tone between 0 and 10 (default value 7). TASCAM LR-10 81
  • TEAC LR-10 | LR-10 owners manual - Page 82
    Set the accent frequency between 0and 9. There is no accent when set to 0. The default value is 4. LEVEL Set the metronome volume between 0and 10. The default value is 5. Starting and stopping the metronome When the METRONOMEscreen is open, press the Á button to start or stop the metronome. NOTE
  • TEAC LR-10 | LR-10 owners manual - Page 83
    charge and to determine if the unit has enough power for normal operation. Options: ALKAL(alkaline batteries, default value), Ni-MH (nickel-metal hydride batteries) TASCAM LR-10 83
  • TEAC LR-10 | LR-10 owners manual - Page 84
    reason it takes a long time compared to the QUICK FORMAToption. 1. Use the §/BROWSE and ¶/MIC buttons to select FULL FORMAT(Execappears light on dark). 84 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 85
    full formatting. Press the [ª] button to cancel full formatting. CAUTION When formatting a card, use a TASCAM PS-P520 AC adapter (sold separately), USB bus power or confirm that the batteries are sufficiently charged. 's internal clock. (See "Setting the date and time" on page 45.) TASCAM LR-10 85
  • TEAC LR-10 | LR-10 owners manual - Page 86
    to change each character. NOTE In addition to the alphabet and numbers, the following characters can be used The default name prefix is "LR0000". 86 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 87
    16-Using the footswitch This unit has a REMOTE jack to which you can connect a TASCAM RC-3F footswitch-type remote control (sold separately) that can be used to operate the unit. operate the unit. The function of each pedal corresponds to the assignment shown on the FOOT SWscreen. TASCAM LR-10 87
  • TEAC LR-10 | LR-10 owners manual - Page 88
    . If an MP3 file has ID3 tag title information that information appears instead. DATE Shows the date and time that the file was created. 88 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 89
    capacity. REMAIN SIZE Shows the amount of unused memory on the SD card. USED SIZE Shows the amount of used memory on the SD card. TASCAM LR-10 89
  • TEAC LR-10 | LR-10 owners manual - Page 90
    and backward searching. AUTO OFF Shows the automatic power OFF setting. BATTERY This shows the battery setting. System Ver. Shows the system firmware version. 90 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 91
    cannot be found or a file could be damaged. Please check the file in question. Non-Supported The audio file is not a supported format. Please see "11-Transferring songs to and from a computer" for file formats that Execution of FAT formatting erases all data currently on the card. TASCAM LR-10 91
  • TEAC LR-10 | LR-10 owners manual - Page 92
    Card Protected Card Change Card Write Timeout Card Full Layer too Deep Can't Divide Max File Size File Full Card Error Current File MP3 92 TASCAM LR-10 Meaning and response The FAT formatting of the card is abnormal or broken. This message also appears if you FAT formatted the card using a computer
  • TEAC LR-10 | LR-10 owners manual - Page 93
    the power cannot be turned OFF, remove the batteries and disconnect the AC adaptor (if connected). If the error message continues to appear, please contact a TEAC Repair Center. TASCAM LR-10 93
  • TEAC LR-10 | LR-10 owners manual - Page 94
    the power cannot be turned OFF, remove the batteries and disconnect the AC adaptor (if connected). If the error message continues to appear, please contact a TEAC Repair Center. 94 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 95
    Troubleshooting If you are having trouble with the operation of this unit, please try the following before seeking repair. If these measures do not solve the problem, please contact the store where you bought the unit or a TASCAM Service that the bit rate is supported by this unit. ªª TASCAM LR-10 95
  • TEAC LR-10 | LR-10 owners manual - Page 96
    19-Troubleshooting ªª The recording level is low. •• Confirm that the input level setting is not too low. •• Confirm that the GAINsetting is not too low. computer using its USB port. •• Are you using a USB hub? •• Confirm that the unit is not recording or in recording standby mode. 96 TASCAM LR-10
  • TEAC LR-10 | LR-10 owners manual - Page 97
    : 23Ω Nominal output level : -14 dBV (10 kΩ load) Maximum output level : +2 dBV (10 kΩ load) Maximum output : 15 mW + 15 mW (32Ω load) Built-in speaker 0.4 W (monaural) Control input/output ratings USB jack Connector : Mini-B type Format : USB 2.0 HIGH SPEED, mass storage class TASCAM LR-10 97
  • TEAC LR-10 | LR-10 owners manual - Page 98
    PC, iMac, G3, G4 266 MHz or faster 98 TASCAM LR-10 64 MB or more memory USB port (USB 2.0 recommended) Recommended USB host controller Intel chipset Supported OS Windows : Windows XP , Windows Vista , Windows 7 Macintosh : Mac OS X 10.2 or later Other specifications Power Two AA batteries (Alkaline
  • TEAC LR-10 | LR-10 owners manual - Page 99
    • Illustrations and other depictions may differ in part from the actual product. • Specifications and external appearance may be changed without notification to improve the product. TASCAM LR-10 99
  • TEAC LR-10 | LR-10 owners manual - Page 100
    LR-10 TEAC CORPORATION Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 USA TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
LR-10
Instrumental
Trainer/Recorder
D01128520B
OWNER’S MANUAL
This device has a serial number
located on the bottom panel. Please
record it and retain it for your
records.
Serial number:
__________________