TP-Link AC1600 Archer VR600 V1 Quick Install Guide

Quick Installation Guide

AC1600 Wireless Gigabit VDSL/ADSL Modem Router

7106505669

REV1.0.0

Connect the Hardware

Configure the Modem Router

Enjoy the Internet

If you don’t need the phone service, just directly connect the

modem router to the phone jack with the provided phone cable,

then follow steps 3 and 4 to complete the hardware connection.

Phone Jack

Power Adapter

Phone Cable

VR600

PHONE

MODEM

1

Now you can enjoy your Internet.

If you want more advanced settings, please refer to the User Guide on TP-LINK official website at www.tp-link.com.

2

3

Push in to turn on

the modem router.

Wired

Wireless

1

DSL Splitter

Phone(Optional)

Verify that the following LEDs are on

and stable before continuing with

the configuration.

4

Note: The DSL LED takes about 1 to 2 minutes to stabilize.

Power On

On

DSL

Ethernet Cable

Modem Router

Connecting your computer to the modem router via a wired or

wireless connection

Connect wirelessly by using the SSID

(network name) and Wireless Password

printed on the product label at the

bottom of the modem router.

Configuring the modem router via a web browser

http://tplinkmodem.net

High

Middle

Low

Save

Confirm Password

New Password

A

Launch a web browser and type in

http://tplinkmodem.net

or

192.168.1.1

. Create a new password (1-15 characters) and click Save.

Note: If the login page does not appear, please refer to FAQ->Q1.

Select your

Region

and

Time Zone

, then click

Next

. Follow the step-by-step

instructions of the Quick Setup to complete the initial configuration.

Note: Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S.

region

only.

C

Enter the password you set and click

Log in

.

Note: For subsequent logins, you only need to enter the password that you have set to log in.

B

DSL

USB1

USB2

LAN1

LAN2

LAN3

LAN4/WAN

Power

2

LAN1

LAN2

LAN3

LAN4/WAN

Power