TP-Link AC750 Archer C20i V1 Quick Install Guide
TP-Link AC750 Manual
 |
View all TP-Link AC750 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link AC750 manual content summary:
- TP-Link AC750 | Archer C20i V1 Quick Install Guide - Page 1
Quick Installation Guide AC750 Wireless Dual Band Router 7106505276 REV3.0.0 Connecting the Hardware If your Internet connection is through an On Internet On Note: If the 2.4G5G LED is o , please press the Wireless button on the side panel for 2 seconds, then check the LEDs again in a few seconds. - TP-Link AC750 | Archer C20i V1 Quick Install Guide - Page 2
the clients on your network. Block network access from specific users or devices. Set up Parental Control with access time and content restrictions. Change the basic wireless network settings easily. How to begin? 1. Scan the QR code to download the TP-LINK Tether app from the Apple App Store or
-
1 -
2
 |
 |
2.4G/5G
On
5
Quick Installation Guide
AC750 Wireless Dual Band Router
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, then follow steps 4 and 5 to
complete the hardware connection.
7106505276
REV3.0.0
Verify that the hardware
connection is correct by
checking these LEDs.
On
Internet
Power
On
Note: If the 2.4G
/
5G LED
is off,
please press the Wireless button on
the side panel for 2 seconds, then
check the LEDs again in a few seconds.
Connecting the Hardware
Modem
Power adapter
Power adapter
Router
Turn on the router.
4
Internet
Turn on the modem and
then wait about
2 minutes
for it to restart.
Connect the modem to the
Internet port on your router
with an Ethernet cable.
Turn off the modem,
and remove the backup
battery if it has one.
1
3
2