TP-Link Archer A5 Archer A5US V5 Quick Installation Guide
TP-Link Archer A5 Manual
 |
View all TP-Link Archer A5 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer A5 manual content summary:
- TP-Link Archer A5 | Archer A5US V5 Quick Installation Guide - Page 1
Quick Installation Guide Wireless Dual Band Router Images may differ from actual products. Router Mode If your internet connection network name) and Wireless Password printed on the label at the bottom of the router. Wireless Password/PIN:XXXXXXXX SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G 2. Launch a - TP-Link Archer A5 | Archer A5US V5 Quick Installation Guide - Page 2
page at http://tplinkwifi.net to configure these functions. For instructions, please refer to the user guide at http://www.tp-link.com. Support For technical support, the user guide and more information, please visit http://www.tp-link.com/support, or simply scan the QR code. FAQ (Frequently Asked
-
1 -
2
 |
 |
Modem
Router
Power adapter
Connect to the power socket
Connect to the internet
Turn off the modem, and remove
the backup battery if it has one.
Turn on the modem and then wait
about
2 minutes
for it to restart.
http://tplinkwifi.net
admin
admin
Log In
2.
Launch a web browser, and enter
http://tplinkwifi.net
or
in the address bar. Use
admin
for both username
and password to log in.
Note:
If the login window does not appear, please refer to
FAQ
>
Q1
.
3.
Run the
Quick Setup
, select
Wireless Router
and follow the
step-by-step instructions to set up the internet connection.
1.
Connect your computer to the router (Wired or Wireless)
Configure the router
Wired
Turn off the Wi-Fi on your computer and connect it to the router
via an Ethernet cable.
Wireless
Connect your device to
the router’s Wi-Fi using
the
SSID
(network name)
and
Wireless Password
printed on the label at
the bottom of the router.
Quick Installation Guide
Wireless Dual Band Router
Images may differ from actual products.
If your internet connection is through an Ethernet cable
directly from the wall instead of through a DSL / Cable /
Satellite modem, connect the Ethernet cable to the
router’s Internet port, then follow step 4 and 5 to
complete the hardware connection.
Router Mode
Power
Internet
2.4GHz
On
5GHz
On
On
Internet
Power
On
Note:
If the 2.4GHz LED
and 5GHz LED
are off, press and hold the WPS/Wi-Fi button
on the rear panel for about 3 seconds
, then
release the button. Both LEDs will turn on.
Verify that the following LEDs stay solid on to confirm
the hardware is connected correctly.
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Connect the power adapter to
the router and turn on the router.
Power On/Off
Connect the modem to the router’s
Internet
port
via an Ethernet cable.