TP-Link Archer A8 Archer A8US V1 Quick Installation Guide
TP-Link Archer A8 Manual
 |
View all TP-Link Archer A8 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer A8 manual content summary:
- TP-Link Archer A8 | Archer A8US V1 Quick Installation Guide - Page 1
Quick Installation Guide MU-MIMO Wi-Fi Router Connect the Hardware If your internet comes from an Ethernet outlet, connect the router's Internet port to it, then follow Step 4 and Step 5. If you want to configure this new router as an access point to extend your network, refer to the Access Point - TP-Link Archer A8 | Archer A8US V1 Quick Installation Guide - Page 2
the setup. Let's Get Started b Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service. Need Help? Q1. What should I do if I cannot access the web management page? Reboot your router and try again. If the computer is set to a static IP
-
1 -
2
 |
 |
Flip the page over to complete network setup.
If your internet comes from an Ethernet outlet, connect the router’s
Internet
port to it, then follow Step 4 and Step 5.
If you want to configure this new router as an access point to extend your network, refer to the
Access Point Mode
section on the back page.
Connect the Hardware
Power On / Off
Connect the power adapter to
the router and turn it on.
Note:
If the 2.4 GHz LED and 5 GHz LED are off, press and hold the
WPS/Wi-Fi button on the back for more than 5 seconds. Both the LEDs
should turn solid.
Check for the following LEDs to confirm the
hardware connection, then refer to the next
section to set up the internet.
* Images may differ from actual products.
Quick Installation Guide
MU-MIMO Wi-Fi Router
Power
On
Internet
On
2.4GHz
On
5GHz
On
Modem
Power adapter
Power adapter
Router
Internet
Power
Power on the modem, and
then wait about
2 minutes
for it to restart.
Unplug your modem,
and remove
the backup battery if it has one.
Connect the
powered-off
modem
to the router’s
Internet
port with an
Ethernet cable.