TP-Link Archer A9 Archer C90US V6 Quick Installation Guide

Flip the page over to complete network setup.

If your internet comes from an Ethernet outlet, connect the router’s

Internet port

to it, then follow Step 4 and Step 5.

If you want to configure this new router as an access point to extend your network, refer to the

Access Point Mode

section on the back page.

Connect the Hardware

Modem

Power adapter

Power adapter

Router

Internet

Power

On / Off

Connect the power adapter to

the router and turn it on.

Note:

If the 2.4 GHz LED and 5 GHz LED are off, press and hold the

WPS/Wi-Fi button on the back for more than 2 seconds. Both the LEDs

should turn solid.

Power

On

Internet

On (Green or Orange)

2.4 GHz

On

5 GHz

On

Check for the following LEDs to confirm the

hardware connection, then refer to the next

section to set up the internet.

Power on the modem, and

then wait about

2 minutes

for it to restart.

Unplug your modem,

and remove

the backup battery if it has one.

Connect the

powered-off

modem

to the router’s

Internet

port with an

Ethernet cable.

* Images may differ from actual products.

Quick Installation Guide

Wireless Dual-Band Router

Set up with videos:

Scan the QR code or visit

to search for the setup video of your product.