TP-Link Archer AX3000 Pro Archer AX3000 ProUS V1.6 Quick Installation Guide
TP-Link Archer AX3000 Pro Manual
 |
View all TP-Link Archer AX3000 Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer AX3000 Pro manual content summary:
- TP-Link Archer AX3000 Pro | Archer AX3000 ProUS V1.6 Quick Installation Guide - Page 1
service from TP-Link, bind your TP-Link ID to the router. Method TWO: Via a Web Browser 1. Connect your device to the router wirelessly or with an Ethernet cable. The default wireless network names (SSIDs) and password are printed on the label at the bottom of the router. Model: Archer AX3000 - TP-Link Archer AX3000 Pro | Archer AX3000 ProUS V1.6 Quick Installation Guide - Page 2
router to its factory default settings. For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support. · Keep the device away from water, fire when the router is hanging on a wall. Quick Installation Guide AX3000 Gigabit Wi-Fi 6 Router
-
1 -
2
 |
 |
Power
On
2.4 GHz
On
5 GHz
On
Internet
On
Internet
1
Connect the
powered-off
modem to the router’s
2.5
Gbps
WAN/LAN
port with an
Ethernet
cable.
Power on the modem, and then wait
about
2 minutes
for it to restart.
2
Set Up the Network
1. Connect your device to the router wirelessly
or with an Ethernet cable.
New Password:
Let’s Get Started
Confirm Password:
http://tplinkwifi.net
Method TWO: Via a Web Browser
2. Launch a web browser, and enter
http://tplinkwifi.net or http://192.168.0.1 in
the address bar. Create a password to log in.
3. Follow the step-by-step instructions to set
up the internet connection and register for
the TP-Link Cloud service.
Note: If the login window does not appear, please refer to
Q2
of
Need Help?
in this guide.
Method ONE: Via TP-Link Tether App
1. Download the Tether app.
To enjoy a more complete service from TP-Link,
bind your TP-Link ID to the router.
Scan for Tether
Tether
or
Choose Your Device Type
Gaming Router
Range Extender
Wireless Router
2. Open the Tether app and log in with your
TP-Link ID.
3. Tap the
button in the Tether app and
select Wireless Router > Standard
Routers. Follow the steps to complete
the setup and connect to the internet.
Note: If you don’t have an account, create one first.
The default wireless network names (SSIDs) and password
are printed on the label at the bottom of the router.
Model: Archer AX3000
AX3000 Gigabit Wi-Fi Router
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
2
Connect the power adapter to
the router and turn it on.
3
Connect the Hardware
Note: If the 2.4 GHz and 5 GHz LEDs are off, press and hold the WPS/Wi-Fi button on the back for more than 2
seconds. The LEDs should turn solid on.
If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the
router’s
2.5 Gbps WAN/LAN port
to it, then follow steps 3 and 4 to complete the hardware connection.
*Image may differ from actual product.
Unplug the power
to turn off your modem, if any, and remove
the backup battery if it has one.
Refer to
Q5
of
Need Help?
to place the router for optimal
Wi-Fi performance.
Modem
Unplug the power
Verify that the hardware connection is correct by checking the following LEDs.
4
1
Note: If you want to use the 1 Gbps WAN/LAN
port as the WAN port instead, please refer to
Q1 of Need Help? in this guide.