TP-Link Archer AX3000 Archer AX3000US V1 User Guide

TP-Link Archer AX3000 Manual

Get TP-Link Archer AX3000 PDF manuals and user guides View all TP-Link Archer AX3000 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link Archer AX3000 manual content summary:

  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 1
    User Guide AX3000 Gigabit Wi-Fi 6 Router Archer AX3000 REV1.0.0 1910012593
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 2
    Setup Wizard 14 4. 2. Quick Setup Via TP-Link Tether App 14 4. 3. Manually Set Up Your Internet Connection 15 4. 4. Set Up the Router as an Access Point 19 4. 5. Set Up an IPv6 Internet Connection 20 Chapter 5. TP-Link Cloud Service 24 5. 1. Register a TP-Link ID 25 5. 2. Change Your TP-Link
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 3
    Your Network Settings 65 12. 1. Change the LAN Settings 66 12. 2. Set Up Link Aggregation 66 12. 3. Configure to Support IPTV Service 67 12. 4. Specify DHCP Server Settings 68 12. 5. Set Up a Dynamic DNS Service Account 69 12. 6. Create Static Routes 71 12. 7. Specify Wireless Settings 73 12
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 4
    the Firmware 83 13. 4. 1.Online Upgrade 83 13. 4. 2.Manual Upgrade 84 13. 4. 3.Restore Interrupted Upgrade After Power Failure 84 13. 5. Backup and Restore Configuration Settings 85 13. 6. Set the Router to Reboot Regularly 86 13. 7. Change the Administrator Account 87 13. 8. Password
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 5
    . *Use 1024-QAM requires clients to also support those functions. More Info The latest software, management app and utility can be found at Download Center at https://www.tp-link.com/support. The Quick Installation Guide can be found where you find this guide or inside the package of the router. 1
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 6
    can be found on the product page at https://www.tp-link.com. The TP-Link Community is provided for you to discuss our products at https://community.tp-link.com. Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support. 2
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 7
    Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It chapter contains the following sections: • Product Overview • Appearance
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 8
    capacity and efficiency. It's also backwards compatible with 802.11a/b/g/n/ac. Moreover, it is simple and convenient to set up and use the TP-Link router due to its intuitive web interface and the powerful Tether app. 1. 2. Appearance 1. 2. 1. Top Panel The router's LEDs (view from left to right
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 9
    ) Flashing slowly Flashing quickly The system is starting up or the firmware is being upgraded. Do not disconnect or power off your router. disabled. Green On Internet service is available. (Internet) Orange On The router's WAN port is connected, but the internet service is not available.
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 10
    the wireless function of your router. Reset Button Press and hold the button until all LEDs turn on to reset the router to its factory default settings. LED Button Press the button for 1 second to turn on or off the LEDs of your router. Antennas Used for wireless operation and data
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 11
    Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Router • Connect Your Router
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 12
    Chapter 2 Connect the Hardware 2. 1. Position Your Router • The product should not be located in a place where it will be exposed to moisture or excessive heat. • Place the router in a location where it can be connected to multiple devices as well as to a power source. • Make sure the cables and
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 13
    1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. TP-Link_XXXX TP-Link_XXXX_5G CHOOSE A NETWORK... OR TP-Link_XXXX Connect automatically Connect TP-Link_XXXX_5G Other... • Method 3: Use the WPS button Wireless devices that support
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 14
    Chapter 2 WLAN On TP-Link MyHome David HomeNetwork TP-Link_Home TP-Link_Router Test close to Connect the Hardware 10
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 15
    Chapter 3 Log In to Your Router
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 16
    click Let's Get Started to log in. Note: • If the login window does not appear, please refer to the FAQ Section. • If you have registered a TP-Link ID and bound your cloud router to it, the login password you created here will be invalid. Please log in to the cloud router using your
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 17
    successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provides IPv6 service. It contains the following sections: • Use Quick Setup Wizard • Quick Setup Via TP-Link Tether App • Manually Set Up Your Internet Connection • Set Up the Router as an Access Point • Set Up
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 18
    .net, and log in with the password you set for the router. 2. Click Quick Setup on the top of the page. Then follow the step-by-step instructions to connect your router to the internet. 3. To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS, and more), log in with
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 19
    to complete the setup and connect to the 4. 3. Manually Set Up Your service information provided by your ISP. Follow the steps below to check or modify your internet connection settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password Follow the instructions on the
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 20
    Chapter 4 Set Up Internet Connection 2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields. 3 ) If you choose PPPoE, enter the username and password provided by your ISP. PPPoE users usually have DSL cable modems. 16
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 21
    ISP. Different parameters are needed according to the Secondary Connection you have chosen. 5 ) If you choose PPTP, enter the username and password, and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection you have chosen. 17
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 22
    Chapter 4 Set Up Internet Connection 5. Click Save. 6. To check your internet connection, click Network Map on the left of the page. After the connection succeeds, the screen will display as follows. Here we take PPPoE as an example. Note: It may take 1-2 minutes to make the settings valid. Tips:
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 23
    instructions. 4. 4. Set Up the Router as an Access Point The router can work as an access point, transforming your existing wired network to a wireless one. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password Setup. 5. Configure your wireless settings and click Next. 19
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 24
    Tips: • Functions, such as Parental Controls, Qos and NAT Forwarding, are not supported in the Access Point mode. • Functions, such as Guest Network, are the (Bridge). 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > IPv6. 3.
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 25
    Chapter 4 Set Up Internet Connection Tips: If you do not know what your internet connection type is, contact your ISP or judge according to the already known information provided by your ISP. 4. Fill in information as required by different connection types. Red blanks must be filled in. 1 ) Static
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 26
    4 Set Up Internet Connection 3 ) PPPoE: By default, the router uses the IPv4 account to connect to connections, please untick the PPPoE same session with IPv4 connection checkbox and manually enter the username and password for the IPv6 connection. 4 ) 6to4 Tunnel: An IPv4 internet connection
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 27
    Chapter 4 Set Up Internet Connection 5. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by your ISP, and click Save. Tips: Find Help on the web management page to know more about items. 6. Click Status to check whether you have
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 28
    and gets better over time, the TP-Link Cloud will notify you when an important firmware upgrade is available. Surely you can also manage multiple TP-Link Cloud devices with a single TP-Link ID. This chapter introduces how to register a new TP-Link ID, bind or unbind TP-Link IDs to manage your router
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 29
    5 TP-Link Cloud Service 5. 1. Register a TP-Link ID If you have skipped the registration during the Quick Setup process, you can: 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Basic > TP-Link Cloud. 3. Click Register Now and follow the instructions
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 30
    Chapter 5 TP-Link Cloud Service • To change your password: 1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save. 5. 3. Manage the User TP-Link IDs The TP-Link ID used to log in to the router for the first time will be automatically bound as the
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 31
    5 TP-Link Cloud Service • Add/remove other TP-Link IDs to/from the router. 5. 3. 1. Add TP-Link ID to Manage the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID. 2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section. 3. Click , enter another TP-Link ID
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 32
    TP-Link Cloud Service 5. 4. Manage the Router via the TP-Link Tether App The Tether app runs on iOS and Android devices, such as smartphones and tablets. 1. Launch the Apple App Store or Google Play store and search "TP-Link and log in with your TP-Link ID or the password your set for the router.
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 33
    Chapter 6 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize guest network options to ensure network
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 34
    .net, and log in with your TP-Link ID or the password you set for the router. 2. manually input the SSID for guest network access. 3 ) Select the Security type. • If No security is selected, no password is needed to access your guest network. • If WAP/WPA2-Personal is selected, keep the default
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 35
    Chapter 6 Guest Network 6. 2. Customize Guest Network Options 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Guest Network. Locate the Settings section. 3. Customize guest network options according to your needs. • Allow
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 36
    the USB ports to share files and media from the USB storage devices over your home network locally, or remotely through the internet. The router supports USB external flash drives and hard drives. It contains the following sections: • Access the USB Storage Device • Media Sharing • Time Machine
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 37
    following table to access files stored on your USB storage device. • Method 1: Go to Computer > Network, then click the Network Server Name (TPSHARE by default) in the Computer section. Note: Operations in different systems are similar. Here we take Windows 7 as an example. Windows computer 33
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 38
    2 ) Type the server address smb://tplinkwifi.net. 3 ) Click Connect. Mac 4 ) When prompted, select the Guest radio box. (If you have set up a username and a password to deny anonymous access to the USB disks, you should select the Registered User radio box. To learn how to set up an account for
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 39
    not routed on the internet. Follow the steps below to configure remote access settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > USB Sharing > USB Storage Device > Access Address page. 3. Tick the FTP (Via Internet
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 40
    a Dynamic DNS Service Account to learn how to set up a domain name for you router. 7. 1. 3. Customize the Access Settings By default, all the network page. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > USB Sharing
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 41
    select specific folders that you want to share and click Save. All folders are shared by default. Tips: The Share icon appears in the Devices Settings section when more than 5 volumes are to enter username and password when accessing the USB storage device. 1. Toggle on Access Authentication. 37
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 42
    password are both admin for default administrator account, and both visit for default problems: • If the sharing password is also the same as the Windows password sharing password for device directly from DLNA-supported devices, such as the router, your DLNA-supported devices (such as your computer
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 43
    Computer Tablet • Use a third-party DLNA-supported player. 7. 3. Time Machine Time Machine backs up all files on your Mac computer to a USB storage device connected to your router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 44
    Chapter 7 4. Click Select to select a location for Time Machine backups. 5. Set the Size Limit for Backups. Note: 0 means no limit for the space. 6. Click Save. USB Settings 40
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 45
    Chapter 8 Homecare - Parental Controls, QoS TP-Link Homecare provides a kit of features to help you create a personalized network that caters for the whole family. You can ensure appropriate internet access for everyone
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 46
    during bed time (10 PM to 6 AM) on weekdays. How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Parental Controls. 3. Click to create a profile for a family member. 4. Add basic profile information
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 47
    Chapter 8 Homecare - Parental Controls, QoS Note: Only devices that have previously been connected to your router's network are listed here. If you are unable to find the device you want to add, connect it to your network and then try again. 4 ) Click Next. 5. Customize the Blocked Content
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 48
    that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Parental Controls clicking to create a profile. Refer to Setting Up Access Restrictions for detailed instructions. , then follow the steps 4. Use the drop-down menu to
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 49
    Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2 ) Go to Advanced > QoS. 3 ) Select Enable QoS. 4 ) Input the maximum upload and download bandwidth provided by your internet service provider. 1Mbps equal s to 1000Kbps. 5 ) Click Save. 2. In the
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 50
    Chapter 8 Homecare - Parental Controls, QoS Done! You can now enjoy using your computer for the next 2 hours. 46
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 51
    Chapter 9 Network Security This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can block or
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 52
    and validates the traffic that is passing through the router based on the protocol. This function is enabled by default. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > Firewall. 3. It's recommended to keep the
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 53
    Chapter 9 1 ) Select Blacklist and click Save. Network Security 2 ) Select the device(s) to be blocked in the Online Devices table by ticking the checkbox(es). 3 ) Click Block above the Online Devices table. The selected devices will be added to Devices in Blacklist automatically. To allow
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 54
    address. I want to: Prevent ARP spoofing and ARP attacks. How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > IP & MAC Binding. 3. Enable IP & MAC Binding. 4. Bind your device(s) according to your
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 55
    Chapter 9 Network Security 3 ) Tick the Enable This Entry checkbox and click OK. Done! Now you don't need to worry about ARP spoofing and ARP attacks! 51
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 56
    IP addresses of the devices. However, it also brings about the problem that an external host cannot initiatively communicate with a specified device on on the local network, thus realizing some special functions. The TP-Link router supports four forwarding rules. If two or more rules are set, the
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 57
    192.168.0.100. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > NAT Forwarding > Virtual Servers. 4. Click Add. Click View Existing Services and select HTTP. The External Port, Internal Port and Protocol will be automatically
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 58
    default settings of Internal Port and Protocol if you are not clear about which port and protocol to use. • If the service you want to use is not in the Service Type, you can enter the corresponding parameters manually log in with your TP-Link ID or the password you set for the router. 2. Go
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 59
    • The triggering ports can not be overlapped. • If the application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify the external ports the application uses first and enter them into External Port field according to the format the page
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 60
    with other players. To solve this problem, set your PC as a DMZ host with all ports open. How can I do that? 1. Assign a static IP address to your PC, for example 192.168.0.100. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 61
    Internet XBOX Router If necessary, you can follow the steps to change the status of UPnP. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your needs. 56
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 62
    internet when you are out of home. The router offers two ways to setup VPN connection: OpenVPN and PPTP (Point to Point Tunneling Protocol) VPN. its speed is faster, it's compatible with most operating systems and also supports mobile devices. Its security is poor and your packets may be cracked
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 63
    http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > OpenVPN, and select Enable VPN Server. Note: • Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 64
    below to set up a PPTP VPN connection. Step 1. Set up PPTP VPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > PPTP VPN, and select Enable VPN Server. 59
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 65
    Chapter 11 VPN Server Note: Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time with internet. 3. In the Client IP Address filed, enter the
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 66
    Chapter 11 VPN Server 1 ) Click Add. 2 ) Enter the Username and Password to authenticate devices to the PPTP VPN Server. 3 ) Click OK. Step 2. Configure PPTP VPN Connection on Your Remote Device The remote device can use the
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 67
    Chapter 11 VPN Server 4. Select Use my Internet connection (VPN). 5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 62
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 68
    Chapter 11 VPN Server 6. Enter the User name and Password you have set for the PPTP VPN server on your router, and click Connect. 7. The PPTP VPN connection is created and ready to use. 63
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 69
    Chapter 11 VPN Server 64
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 70
    Network Settings This chapter guides you on how to configure advanced network features. It contains the following sections: • Change the LAN Settings • Set Up Link Aggregation • Configure to Support IPTV Service • Specify DHCP Server Settings • Set Up a Dynamic DNS Service Account • Create Static
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 71
    it. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > LAN. 3. Type in a new IP Address appropriate to your needs. And leave the Subnet Mask as the default settings. 4. Click Save. Note: If you have set the Virtual
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 72
    Network Settings 12. 3. Configure to Support IPTV Service I want to: Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP). How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 73
    Server if necessary, and you can reserve LAN IP addresses for specified client devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > DHCP Server. • To specify the IP address that the router assigns: 1. Tick the
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 74
    and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > Dynamic DNS. 3. Select the DDNS Service Provider (TP-Link, NO-IP or DynDNS). It is recommended to select TP-Link so that you can enjoy TP-Link's superior DDNS service. Otherwise, please select NO-IP
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 75
    enjoy TP-Link's DDNS service, you have to log in with a TP-Link ID. If you have not logged in with one, click Log in. 4. Click Register in the Domain Name List if you have chosen TP-Link, and enter the Domain Name as needed. If you have chosen NO-IP or DynDNS, enter the username, password and
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 76
    6. Create Static Routes Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. I want to: Visit
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 77
    function. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Router A. 3. Go to Network > Static Routing. destination network is a single IP, so here enter 255.255.255.255. Default Gateway: The IP address of the gateway device to which the data packets will
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 78
    to your needs. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. • To enable or disable the wireless function: 1. Go to Basic > Wireless. 2. The wireless radio is enabled by default. If you want to disable the wireless function of the router, just
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 79
    scan for local wireless networks on your wireless device and you need to manually join the network. • To use the smart connect function The smart 2. Enable Smart Connect. 3. Keep the default or set a new SSID and password, and click Save. This SSID and password will be applied both for 2.4GHz and
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 80
    transmit power. The default and recommended setting Devices supporting 5GHz wireless band can enjoy the Multi-User MIMO service. 1. Setup (WPS) provides an easier approach to set up a security-protected Wi-Fi connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 81
    a new one. Note: PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is printed on the label of the router. 12. 8. 3. Connect via the Client's PIN Enter the PIN
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 82
    off at a specific time when you do not need the wireless connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Wireless Schedule. 3. Enable the Wireless Off Time Schedule feature. 4. Click Add to
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 83
    : • Set Up System Time • Control LEDs • Test the Network Connectivity • Upgrade the Firmware • Backup and Restore Configuration Settings • Change the Administrator Account • Password Recovery • Local Management • Remote Management • System Log • Monitor the Internet Traffic Statistics • System
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 84
    like Parental Controls. You can choose the way to obtain the system time as needed. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Time Settings. Tips: You can toggle on to enable 24-Hour Time feature
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 85
    set the date and time: 1. In the Set Time field, select Manually. 2. Set the current Date (In MM/DD/YYYY format). 3. Set the current Time (In HH/MM/SS format). 4. Click Save. • To set up Daylight Saving
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 86
    off the LEDs either from the web management page or by pressing the LED button. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > LED Control. • To control LED: Toggle on LED Status to turn on the
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 87
    Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System packet size or the Traceroute Max TTL. It's recommended to keep the default value. The figure below indicates the proper connection between the router and the
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 88
    will inform you through the web management page if there's any update firmware available for your router. Also, the latest firmware will be released at the TP-Link official website www.tp-link.com, and you can download it from the Support page for free. Note: • Make sure you remove all attached USB
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 89
    you set for the router. You will see the Firmware Upgrade page. 13. 4. 2. Manual Upgrade 1. Download the latest firmware file for the router from www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > System
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 90
    Manage the Router 4. Click Browse and select the downloaded firmware file. 5. Click Upgrade and wait for a few minutes current settings and reset the router to the default factory settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 91
    process, do not turn off the router. • After reset, you can still use the current login password or the TP-Link ID to log in to the web management page. • To reset the router to factory default settings: 1. Click Factory Restore to reset the router. 2. Wait a few minutes for the resetting and
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 92
    log in to the web management page, the account management feature will be disabled. To manage the TP-Link ID, go to Basic > TP-Link Cloud. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > System Tools > Administration and focus on the Account
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 93
    . To manage the TP-Link ID, go to Basic > TP-Link Cloud. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > System Tools > Administration and focus on the Default Password Recovery section. 3. Tick the Enable Default Password Recovery checkbox
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 94
    . 2. Click Add. 3. Click Scan and select the device to manage the router from the Existing Devices list, or enter the MAC address of the device manually. 4. Specify a Description for this entry. 5. Tick the Enable This Entry checkbox. 6. Click OK. 89
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 95
    router does not work normally, you can save the system log and send it to the technical support for troubleshooting. • To save the system log locally: 1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Log. 90
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 96
    would be great if the system logs could be sent to my mailbox at 8 a.m. every day. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Log. 3. Click Mail Settings. 4. Enter the information required: 91
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 97
    and WLAN sent and received packets, allowing you to monitor the volume of internet traffic statistics. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Traffic Monitor. 92
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 98
    of traffic transmission rules in wireless networks. It's recommended to keep the default settings if you are not sure of the proper ones in the case. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 99
    15 to determine the interval of DTIM (Delivery Traffic Indication Message). The default interval is 1, indicating the DTIM interval is the same as Beacon - Enter the number of seconds between 30 and 86400, or use the default value 0 that indicates no key interval to control the time interval for the
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 100
    Manage the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Parameters. Focus on NAT section. 3. NAT feature is enable by default and it's highly recommended. If you disable it, you may have no
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 101
    Chapter 14 Work with Alexa This chapter will show you how to configure your router to work with Alexa.
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 102
    or the password you set for the router. 2. Go to Advanced > Smart Life Assistant. 3. Follow the on-screen instructions on the Alexa section to set up smart control of your router. ≡ Or download TP-Link Tether app, open it and tap the icon, then select Smart Life Assistants to complete the setup. 97
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 103
    . Q2. What should I do if I forget my web management password? • If you are using a TP-Link ID to log in, or you have enabled the Password Recovery feature of the router, click Forgot password on the login page and then follow the instructions to reset it. • Alternatively, press and hold the Reset
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 104
    4 ) Click LAN settings and deselect the following three options and click OK. 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 99
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 105
    the technical support. Note: You'll need to reconfigure the router to surf the internet once the router is reset. Q4. What should I do if I can't access the internet even though the configuration is finished? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 106
    • Your computer might not recognize any DNS server addresses. Please manually configure the DNS server. 1 ) Go to Advanced > Network > DHCP Server. 2 ) Enter 8.8.8.8 another 1 or 2 minutes and check the internet access. • Reset the router to factory default settings and reconfigure the router. 101
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 107
    • Upgrade the firmware of the router. • Check the TCP/IP settings on the proper. • Clone the MAC address of your computer. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2 ) Go to Advanced > Network > Internet and focus on the MAC Clone
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 108
    modem and you can't access the internet. To resolve this problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168.2.1. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2 ) Go to Advanced > Network
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 109
    upgrade the firmware of the router. If you've tried every method above but still cannot access the internet, please contact the technical support. Q5. or blocked somehow. 2 ) Click Troubleshoot and windows might be able to fix the problem by itself. • On Windows XP TP-Link Utility, for example). 104
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 110
    Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK. If you can find other network but fail to connect, please follow the steps below: • Authenticating problem/password mismatch: 1 ) Sometimes you will be asked to type in a PIN
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 111
    Security Key. 3 ) If it continues to show note of Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless router. Note: Wireless Password/Network Security Key is case sensitive. • Windows unable to connect to XXXX / Can not join this network / Taking longer
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 112
    COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 113
    Archer AX3000 Component Name I.T.E. Power Model GQ24-120200-AU Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link in accordance with the instructions, may cause harmful
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 114
    co-located or operating in conjunction with any other antenna or transmitter." We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 115
    changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 116
    Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 117
    Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) NCC Notice & BSMI Notice: 注意！ 4.7.9.1 4.7.9.2 Pb Cd Hg 六價鉻 CrVI PBB PBDE PCB ○○ ○ ○ ○ ○ 外殼 ○○ ○ ○ ○ ○ ○ ○ ○ 備考1. 超出0.1 wt 0.01 wt 備考2 備考3 112
  • TP-Link Archer AX3000 | Archer AX3000US V1 User Guide - Page 118
    Safety Information • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended • Do not use the device
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
REV1.0.0
1910012593
User Guide
AX3000 Gigabit Wi-Fi 6 Router
Archer AX3000