TP-Link Archer AX3200 Archer AX3200US V1 Quick Installation Guidel
TP-Link Archer AX3200 Manual
View all TP-Link Archer AX3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer AX3200 manual content summary:
- TP-Link Archer AX3200 | Archer AX3200US V1 Quick Installation Guidel - Page 1
Quick Installation Guide Tri-Band Wi-Fi 6 Router Images may differ from actual products. 1 Connect the 1 Gbps WAN/LAN port as the WAN port instead, please refer to Q1 of Need Help? in this guide. Internet 3 Connect the power adapter to the router and turn on the router. 4 Verify the LED is - TP-Link Archer AX3200 | Archer AX3200US V1 Quick Installation Guidel - Page 2
Need Help? in this guide. http://tplinkwifi.net New Password: Confirm Password: Let's Get Started 3. Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service. LED Explanation LED Description Solid Orange The Wi-Fi is off. Pulsing Orange
If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect
the Ethernet cable to the router’s 2.5 Gbps WAN/LAN port and follow step 3 and 4 to complete the hardware connection.
Modem
Unplug the power
Unplug the power
to turn off your modem, if any, and remove the backup battery if it has one.
Place the router horizontally and orient the antennas vertically.
Connect the Hardware
1
Tri-Band Wi-Fi 6 Router
Quick Installation Guide
Internet
Connect the power adapter to
the router and turn on the router.
3
Power on the modem, and then wait
about
2 minutes
for it to restart.
2
Verify the LED is solid on (red or blue)
before moving on.
4
Connect the
powered-off
modem to the
2.5 Gbps
WAN/LAN
port with an Ethernet cable.
Note: If you want to use the 1 Gbps WAN/LAN port as the WAN port instead,
please refer to
Q1
of
Need Help?
in this guide.
1
Images may differ from actual products.