TP-Link Archer AX3200 Archer AX3200US V1 User Guide

TP-Link Archer AX3200 Manual

Get TP-Link Archer AX3200 PDF manuals and user guides View all TP-Link Archer AX3200 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link Archer AX3200 manual content summary:

  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 1
    User Guide AX3200 Tri-Band Wi-Fi 6 Router Archer AX3200 ©2020 TP-Link REV1.0.0 1910012844
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 2
    Contents About This Guide 1 Chapter 1. TP-Link Tether App 13 4. 3. Manually Set Up Your Internet Connection 14 4. 4. Set Up the Router as an Access Point 17 4. 5. Set Up an IPv6 Internet Connection 17 Chapter 5. TP-Link Cloud Service 21 5. 1. Register a TP-Link ID 22 5. 2. Change Your TP-Link
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 3
    13. Customize Your Network Settings 66 13. 1. Change the LAN Settings 67 13. 2. Configure to Support IPTV Service 67 13. 3. Specify DHCP Server Settings 69 13. 4. Set Up a Dynamic DNS Service Account 70 13. 5. Create Static Routes 71 13. 6. Specify Wireless Settings 73 13. 7. Schedule Your
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 4
    13. 9. Advanced Wireless Settings 77 Chapter 14. Manage the Router 79 14. 1. Upgrade the Firmware 80 14. 1. 1.Auto Update 80 14. 1. 2.Online Upgrade 80 14. 1. 3.Local Upgrade 81 14. 2. Backup and Restore Configuration Settings 82 14. 3. Change the Login Password 83 14. 4. Password Recovery
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 5
    Guide This guide is a complement of Quick Installation Guide. The Quick Installation Guide instructs you on quick internet setup, and this guide Download Center at https://www.tp-link.com/support/download/. The Quick Installation Guide can be found where you find this guide or inside the package of
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 6
    client condition. *Use of Wi-Fi 6 (802.11ax), and features including OFDMA, MU-MIMO, 1024-QAM, and HT160 require clients to also support the corresponding features. 1024-QAM is only available on 5 GHz-1 band and 2.4 GHz band. *2.5 Gbps internet speeds require compatible service plans and equipment
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 7
    Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It chapter contains the following sections: • Product Overview • Appearance
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 8
    Chapter 1 Get to Know About Your Router 1. 1. Product Overview TP-Link AX router, with next-generation 802.11ax Wi-Fi Technology, achieves WiFi performance at its ultimate level. The revolutionary combination of OFDMA and 1024QAM improve throughput by 4 times and dramatically increase the whole
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 9
    be used as the WAN port at the same time. If you choose to use 2.5 Gbps WAN/LAN port as the WAN port for internet service, the 1 Gbps WAN/LAN port will be used as LAN port by default. It's recommended to use 2.5 Gbps WAN/LAN port as the WAN port
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 10
    Get to Know About Your Router The following parts are located on the side panel. Button and Port Explanation Item USB 3.0 Port (WPS Button) (Wi-Fi Button) Description For connecting your USB storage devices to the router. Press this WPS button, and immediately press the WPS button on your client
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 11
    Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Router • Connect Your Router
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 12
    Chapter 2 Connect the Hardware 2. 1. Position Your Router • The product should not be located in a place where it will be exposed to moisture or excessive heat. • Place the router in a location where it can be connected to multiple devices as well as to a power source. • Make sure the cables and
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 13
    < Settings Wi-Fi Wireless Network Connection Wi-Fi TP-Link_XXXX CHOOSE A NETWORK... TP-Link_XXXX_5G_1 TP-Link_XXXX_5G_2 OR TP-Link_XXXX TP-Link_XXXX_5G_1 Connect automatically Connect TP-Link_XXXX_5G_2 Other... • Method 3: Use the WPS button Wireless devices that support WPS, including
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 14
    Chapter 3 Log In to Your Router
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 15
    click Let's Get Started to log in. Note: • If the login window does not appear, please refer to the FAQ Section. • If you have registered a TP-Link ID and bound your cloud router to it, the login password you created here will be invalid. Please log in to the cloud router using
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 16
    successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provides IPv6 service. It contains the following sections: • Use Quick Setup Wizard • Quick Setup Via TP-Link Tether App • Manually Set Up Your Internet Connection • Set Up the Router as an Access Point • Set Up
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 17
    service from TP-Link (remote management, TP-Link DDNS, and more.), log in with your TP-Link ID or click Sign Up Now to get one. Then follow the instructions to bind the cloud router to your TP-Link ID. Note: • To learn more about the TP-Link Cloud service, please refer to the TP-Link Cloud Service
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 18
    4. 3. Manually Set Up Your TP-Link ID or the password you set for the router. 2. Go to Internet. 3. Select a port for internet service. Make sure the cable is securely connected to this port on your router. 4. Select your internet connection type from the drop-down list. 5. Follow the instructions
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 19
    Chapter 4 Set Up Internet Connection 2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields. 3 ) If you choose PPPoE, enter the username and password provided by your ISP. PPPoE users usually have DSL cable modems. 15
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 20
    page, please go to Advanced > Network > Internet to complete the configuration. • If you still cannot access the internet, refer to the FAQ section for further instructions. 16
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 21
    to a wireless one. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > click Save. Now, you can enjoy Wi-Fi. Tips: • Functions, such as Parental Controls, QoS and NAT Forwarding, are not supported in the Access Point mode. •
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 22
    Chapter 4 Set Up Internet Connection 2. Go to Advanced > IPv6. 3. Enable IPv6 and select the internet connection type provided by your ISP. Tips: If you do not know what your internet connection type is, contact your ISP or judge according to the already known information provided by your ISP. 4.
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 23
    the username and password for the IPv6 connection. 4 ) 6to4 Tunnel: An IPv4 internet connection type is a prerequisite for this connection type (Manually Set Up Your Internet Connection). Click Advanced to input further information if your ISP requires. Click Save and then click Connect. 5 ) Pass
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 24
    Chapter 4 Set Up Internet Connection 5. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by your ISP, and click Save. 6. Click Status to check whether you have successfully set up an IPv6 connection. Tips: Visit the FAQ section
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 25
    Chapter 5 TP-Link Cloud Service TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your router with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app. To ensure that your
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 26
    you set for the router. 2. Go to Advanced > TP-Link ID or click TP-Link ID on the very top of the page. 3. Click Sign Up and follow the instructions to register a TP-Link ID. 4. After activating your TP-Link ID, come back to the TP-Link ID page to log in. The TP-Link ID used to log in to the router
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 27
    Chapter 5 TP-Link Cloud Service • To change your password: 1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save. 5. 3. Manage the User TP-Link IDs The TP-Link ID used to log in to the router for the first time will be automatically bound as the
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 28
    Chapter 5 TP-Link Cloud Service from the same router as Users. All accounts can monitor and manage the router locally or remotely, but user accounts cannot: • Reset the router to its factory default settings either on the web management page or in the Tether app. • Add/remove other TP-Link IDs to/
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 29
    TP-Link Cloud Service 5. 4. Manage the Router via the TP-Link Tether App The Tether app runs on iOS and Android devices, such as smartphones and tablets. 1. Launch the Apple App Store or Google Play store and search "TP-Link in with your TP-Link ID. Note: If you don't have a TP-Link ID, create one
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 30
    Chapter 6 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them.
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 31
    for Guests 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to ) Customize the SSID. Don't select Hide SSID unless you want your guests to manually input the SSID for guest network access. 3 ) Select the Security type and customize
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 32
    Chapter 6 Guest Network 6. 2. Customize Guest Network Options 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless >Guest Network. Locate the Guest Permissions section. 3. Customize guest network options according
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 33
    the USB ports to share files and media from the USB storage devices over your home network locally, or remotely through the internet. The router supports USB external flash drives and hard drives. It contains the following sections: • Access the USB Storage Device • Media Sharing • Time Machine
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 34
    Chapter 7 USB Settings 7. 1. Access the USB Storage Device Insert your USB storage device into the router's USB port and then access files stored there locally or remotely. Tips: • If you use USB hubs, make sure no more than 4 devices are connected to the router. • If the USB storage device
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 35
    Chapter 7 USB Settings • Method 2: Open the Windows Explorer (or go to Computer) and type the server address \\tplinkwifi.net or ftp://tplinkwifi.net in the address bar, then press Enter. Windows computer 1 ) Select Go > Connect to Server. 2 ) Type the server address smb://tplinkwifi.net. 3 )
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 36
    are not routed on the internet. Follow the steps below to configure remote access settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > USB > USB Storage Device. 3. Tick the Internet FTP checkbox, and then click
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 37
    party app for network files management. Tips: Click Set Up a Dynamic DNS Service Account to learn how to set up a domain name for you router. router's web management page. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced >
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 38
    Chapter 7 USB Settings 2. Now you can access the USB storage device by visiting \\MyShare (for Windows) or smb://MyShare (for Mac). • To Only Share Specific Content Focus on the File Sharing section. Specify sharing folders that you want to share and click Save. • To Set Up Authentication for
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 39
    credential mechanism may cause the following problems: • If the sharing password is settings. Please log out from the Windows and try to access again. Or you can change the supported devices, such as your computer, tablet and PS2/3/4. 1. Visit http://tplinkwifi.net, and log in with your TP-Link
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 40
    an example. Windows Computer Tablet • Use a third-party DLNA-supported player. 7. 3. Time Machine Time Machine backs up all files on your Mac computer to a USB storage device connected to your router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 41
    Chapter 7 3. Tick the checkbox to enable Time Machine. 4. Click Select to select a location for Time Machine backups. 5. Set the Size Limit for Backups. Note: 0 means no limit for the space. 6. Click Save. USB Settings 37
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 42
    Chapter 8 Parental Controls This function allows you to block inappropriate, explicit and malicious websites, and control access to specified websites at specified time. It contains the following sections: • Setting Up Access Restrictions • Monitoring Internet Usage
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 43
    on weekdays. How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Parental Controls. 3. it to your network and then try again. 4 ) Click Next. 5. Customize the Blocked Content according to your needs for
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 44
    Chapter 8 Parental Controls 1 ) Enter a keyword (for example, "Facebook") or a URL (for example, "www. facebook.com"). All websites containing the keywords will be blocked. 2 ) Click Next. 6. Set time restrictions on internet access. 1 ) Enable Time Limits on Monday to Friday and Saturday &
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 45
    I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > steps to create a profile. Refer to Setting Up Access Restrictions for detailed instructions. , then follow the 4. Use the drop-down menu to view the websites
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 46
    Chapter 8 Parental Controls Done! You can now check up on your child's online activities. 42
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 47
    Chapter 9 QoS This chapter introduces how to create a QoS (Quality of Service) rule to specify prioritization of traffic and minimize the impact caused when the connection is under heavy load.
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 48
    and set bandwidth allocation. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2 ) Go to Advanced > QoS ) Input the maximum upload and download bandwidth provided by your internet service provider. 1Mbps equal s to 1000Kbps. 5 ) Click Save. 2.
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 49
    Chapter 10 Network Security This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can protect your
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 50
    is passing through the router based on the protocol. This function is enabled by default. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > Firewall. It's recommended to keep the default settings. 10. 2. Access
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 51
    Chapter 10 Network Security 2 ) Click and select devices you want to be blocked and Click ADD. 3 ) The Operation Succeeded message will appear on the screen, which means the selected devices have been successfully added to the blacklist. To allow specific device(s): 1 ) Select Whitelist and
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 52
    message will appear on the screen, which means the selected devices have been successfully added to the whitelist. • Add unconnected devices 1 ) Click Add Manually. 2 ) Enter the Device Name and MAC Address of the device you want to be allowed and click ADD. 3 ) The Operation Succeeded message will
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 53
    10 Network Security I want to: Prevent ARP spoofing and ARP attacks. How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > IP & MAC Binding. 3. Enable IP & MAC Binding. 4. Bind your device
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 54
    Chapter 10 To bind the unconnected device: 1 ) Click in the Binding List section. Network Security 2 ) Enter the MAC Address and IP Address that you want to bind. 3 ) Click SAVE. Done! Now you don't need to worry about ARP spoofing and ARP attacks! 50
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 55
    IP addresses of the devices. However, it also brings about the problem that an external host cannot initiatively communicate with a specified device on on the local network, thus realizing some special functions. The TP-Link router supports four forwarding rules. If two or more rules are set, the
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 56
    services use different service ports. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced >
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 57
    are not clear about which port and protocol to use. • If the service you want to use is not in the common services list, you can enter the corresponding parameters manually. You should verify the port number that the service needs. • You can add multiple port forwarding rules if you want to provide
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 58
    register a domain name for the WAN referring to Set Up a Dynamic DNS Service Account. Then users on the internet can use http:// domain name to visit TP-Link ID or the password you set for the router. 2. Go to Advanced > NAT Forwarding > Port Triggering and click . 3. Click VIEW COMMON SERVICES
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 59
    application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify the external ports the application uses first and enter them into External a team with other players. To solve this problem, set your PC as a DMZ host with all ports open. 55
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 60
    . 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go enter the PC's IP address 192.168.0.100 manually in the DMZ Host IP Address field. 5. application supporting UPnP protocol can use this feature. • UPnP feature needs the support of
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 61
    without a hitch. INTERNET If necessary, you can follow the steps to change the status of UPnP. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your needs. 57
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 62
    as campus network and company intranet. PPTP VPN is more easily used and its speed is faster, it's compatible with most operating systems and also supports mobile devices. Its security is poor and your packets may be cracked easily, and PPTP VPN connection may be prevented by some ISP. It contains
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 63
    Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced the VPN Server. 3. Select the Service Type (communication protocol) for OpenVPN Server: UDP, TCP. 4. Enter a VPN Service Port to which a VPN device connects
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 64
    below to set up a PPTP VPN connection. Step 1. Set up PPTP VPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 60
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 65
    Go to Advanced > VPN Server > PPTP, and tick the Enable box of PPTP. Note: Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time with internet. 3. In the Client IP Address field
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 66
    Chapter 12 VPN Server 3 ) Click ADD. Step 2. Configure PPTP VPN Connection on Your Remote Device The remote device can use the Windows built-in PPTP software or a third-party PPTP software to connect to PPTP Server. Here we use the Windows built-in PPTP software as an example. 1. Go to Start >
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 67
    Chapter 12 VPN Server 4. Select Use my Internet connection (VPN). 5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 63
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 68
    Chapter 12 VPN Server 6. Enter the User name and Password you have set for the PPTP VPN server on your router, and click Connect. 7. The PPTP VPN connection is created and ready to use. 64
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 69
    Chapter 12 VPN Server 65
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 70
    Your Network Settings This chapter guides you on how to configure advanced network features. It contains the following sections: • Change the LAN Settings • Configure to Support IPTV Service • Specify DHCP Server Settings • Set Up a Dynamic DNS Service Account • Create Static Routes • Specify
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 71
    reconfigure these features. 13. 2. Configure to Support IPTV Service I want to: Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP). How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 72
    parameters, including the LAN port for IPTV connection, are predetermined. If not, select the LAN type to determine which port is used to support IPTV service. 4 ) Click SAVE. 5 ) Connect the set-top box to the corresponding LAN port which is predetermined or you have specified in Step 3. Done! Your
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 73
    the DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > DHCP Server. • To specify the IP address that the router assigns
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 74
    client device manually. 3. Enter the IP address to reserve for the client device. 4. Click SAVE. 13. 4. Set Up a Dynamic DNS Service Account Most register first by clicking Register Now. Note: To enjoy TP-Link's DDNS service, you have to log in with a TP-Link ID. If you have not logged in with one
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 75
    account. 13. 5. Create Static Routes Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. 71
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 76
    ' LAN IP addresses to two different IP addresses on the same subnet. Disable Router B's DHCP function. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Router A. 3. Go to Advanced > Network > Routing. 4. Click Add and finish the settings according to the
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 77
    on the label of the router. You can customize the wireless settings according to your needs. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 73
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 78
    you scan for local wireless networks on your wireless device and you need to manually join the network. • To use the Smart Connect function: The Smart Connect a more high-speed network by assigning your devices to best wireless bands based on actual conditions to balance network demands. 1. Go to
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 79
    do not need the wireless connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > 13. 8. Use WPS for Wireless Connection Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 80
    ://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Make sure the Wi-Fi of your router is on and go to Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 81
    Settings 13. 9. Advanced Wireless Settings Check advanced wireless settings for your device. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Additional Settings. 3. Configure advanced wireless settings. • WMM
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 82
    Chapter 13 Customize Your Network Settings • Airtime Fairness - This function can improve the overall network performance by sacrificing a little bit of network time on your slow devices. • Beacon Interval - Enter a value between 40 and 1000 in milliseconds to determine the duration between beacon
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 83
    Chapter 14 Manage the Router This chapter will show you the configuration for managing and maintaining your router. It contains the following sections: • Upgrade the Firmware • Backup and Restore Configuration Settings • Change the Login Password • Password Recovery • Local Management • Remote
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 84
    if there's any update firmware available for your router. Also, the latest firmware will be released at the TP-Link official website www.tp-link.com, and you can download it from the Support page for free. Note: • Backup your router configuration before firmware upgrade. • Do NOT turn off the router
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 85
    see the Firmware Upgrade page. 14. 1. 3. Local Upgrade 1. Download the latest firmware file for the router from www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > System > Firmware Upgrade. 4. Focus on the
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 86
    upgrade the firmware for the router, please contact our Technical Support. 14. 2. Backup and Restore Configuration Settings The configuration default factory settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced >
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 87
    rebooting. Note: • During the resetting process, do not turn off the router. • After reset, you can still use the current login password or the TP-Link ID to log in to the web management page. • To reset the router to factory default settings: 1. Click FACTORY RESTORE to reset the router. 2. Wait
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 88
    to the web management page, the Password Recovery feature will be disabled. To manage the TP-Link ID, go to Advanced > TP-Link ID. 1. Visit http://tplinkwifi.net, and log in with the password you set for click Forgot Password? on the login page and follow the instructions to set a new password. 84
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 89
    devices on your LAN from accessing the router by using the MAC address-based authentication. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Administration and complete the settings In Local Management section as
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 90
    enter the MAC address of the device manually. 4. Specify a Description for this entry. 5. Click SAVE. 14. 6. Remote Management This feature allows you to control remote devices' authority to manage the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 91
    WAN IP address of the router on Network Map > Internet. • The router's WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. • Allow a specific device to manage the router remotely: 87
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 92
    router does not work normally, you can save the system log and send it to the technical support for troubleshooting. • To save the system log locally: 1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > System Log. 3. Choose
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 93
    would be great if the system logs could be sent to my mailbox at 8 a.m. every day. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Log. 3. In the Save Log section, click MAIL LOG. 4. Enter
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 94
    Chapter 14 Manage the Router 1 ) Email From: Enter the email address used for sending the system log. 2 ) Select Require Password. Tips: Generally, Require Password should be selected if the login of the mailbox requires username and password. 3 ) Username: Enter the email address used for sending
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 95
    Chapter 14 Manage the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Diagnostics. 3. Enter the information: 1 ) Choose Ping or Traceroute as the diagnostic tool
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 96
    functions like Parental Controls. You can choose the way to obtain the system time as needed. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Time & Language. • To get time from the internet: 1. Enable 24-Hour Time
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 97
    Time field, select Get from Managing Device. 2. The time of your computer will then be displayed and click SAVE. • To manually set the date and time: 1. In the Set Time field, select Manually. 2. Set the current Date (In MM/DD/YYYY format). 3. Set the current Time (In HH/MM/SS format). 4. Click
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 98
    The Scheduled Reboot feature cleans the cache to enhance the running performance of the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Reboot. 3. Tick the Enable box of Reboot Schedule. 4. Specify the
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 99
    can enable the Night Mode feature to specify a time period during which the LED is off. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > LED Control. 3. Enable Night Mode. 4. Specify the LED off time, and the
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 100
    TP-Link ID to log in, or you have enabled the Password Recovery feature of the router, click Forgot password on the login page and then follow the instructions 's web management page? This can happen for a variety of reasons. Please try the methods below to log in again. • Make sure your computer is
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 101
    4 ) Click LAN settings and deselect the following three options and click OK. 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 97
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 102
    log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced> Network > Status to check internet status: If IP Address is a valid one, please try the methods below and try again: • Your computer might not recognize any DNS server addresses. Please manually configure the DNS
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 103
    particular device if all other devices can get internet from the router. As the picture below shows, if the IP Address is 0.0.0.0, please try the methods below and try again: • Make sure the physical connection between the router and the modem is proper. • Clone the MAC address of your computer. 99
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 104
    • Modify the LAN IP address of the router. Note: Most TP-Link routers use 192.168.0.1/192.168.1.1 as their default LAN IP address problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168.2.1. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 105
    learned from the ISP. 2 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3 ) Go to Advanced > of the router. If you've tried every method above but still cannot access the internet, please contact the technical support. Q5. What should I do if
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 106
    or blocked somehow. 2 ) Click Troubleshoot and windows might be able to fix the problem by itself. • On Windows XP TP-Link Utility, for example). 3 ) Select and right click on My Computer on desktop, select Manage to open Computer Management window. 4 ) Expand Services and Applications > Services
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 107
    usual to connect to this network: • Check the wireless signal strength of your network. If it is weak (1~3 bars), please move the router closer and try again. • Change the wireless Channel of the router to 1, 6 or 11 to reduce interference from other networks. • Re-install or update the driver for
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 108
    AX3200 Tri-Band Wi-Fi 6 Router Model Number: Archer AX3200 Component Name I.T.E. Power Supply Model S042-1A120330VU Responsible party: TP-Link USA Corporation, d/b/a TP-Link not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 109
    operating in conjunction with any other antenna or transmitter." We, TP-Link USA Corporation, has determined that the equipment shown as above installed and used in accordance with the instructions, may cause harmful interference to radio try to correct the interference by one or more of the
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 110
    changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 111
    for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; Avertissement: 1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux syst
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 112
    Korea Warning Statements: NCC Notice & BSMI Notice: 注意！ 4.7.9.1 4.7.9.2 Equipment name AX3200 Tri-Band Wi-Fi 6 Router Type designation (Type) Archer AX3200 單元 Ｕnit 鉛 Lead (Pb) Restricted substances and its chemical symbols 汞 Mercury (Hg) 鎘
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 113
    • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended • Do
  • TP-Link Archer AX3200 | Archer AX3200US V1 User Guide - Page 114
    Symbol Explanation Polarity of output terminals Energy efficiency Marking Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
REV1.0.0
1910012844
User Guide
AX3200 Tri-Band Wi-Fi 6 Router
Archer AX3200
©2020 TP-Link