TP-Link Archer BE550 Archer BE550US V1.6 User Guide

TP-Link Archer BE550 Manual

Get TP-Link Archer BE550 PDF manuals and user guides View all TP-Link Archer BE550 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link Archer BE550 manual content summary:

  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 1
    User Guide BE9300 Tri-Band Wi-Fi 7 Router Archer BE550 © 2023 TP-Link 1910013423 REV1.0.0
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 2
    Contents About This Guide 1 Chapter 1. Get to Know About Your Router 3 Quick Setup Via TP-Link Tether App 13 4. 3. Manually Set Up Your Internet Connection 14 4. 4. Set Up Set Up an IPv6 Internet Connection 17 Chapter 5. TP-Link Cloud Service 23 5. 1. Register a TP-Link ID 24 5. 2. Change
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 3
    7. 3. 1.Connect via the Client's PIN 37 7. 3. 2.Connect via the Router's PIN 38 7. 3. 3.Push the WPS Button 38 7. 4. Advanced Wireless Settings 39 Chapter 8. Guest Network 41 8. 1. Create a Network for Guests 42 8. 2. Customize Guest Network Options 43 Chapter 9. IoT Network 44 Chapter 10.
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 4
    Settings 108 16. 3. Set Up Link Aggregation 108 16. 4. Flow Controller 109 16. 5. Configure to Support IPTV Service 110 16. 6. Specify DHCP Server Settings 111 16. 7. Set Up a Dynamic DNS Service Account 112 16. 8. Create Static Routes 114 Chapter 17. Manage the Router 117 17. 1. Update the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 5
    Guide This guide is a complement of Quick Installation Guide. The Quick Installation Guide instructs you on quick internet setup, and this guide Center at https://www.tp-link.com/support/download. The Quick Installation Guide can be found where you find this guide or inside the package of the router
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 6
    . Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported by the network cable, internet service provider factors, and other environmental conditions. * Significantly Lower Latency refers to the latency improvement of Wi-Fi 7 routers compared
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 7
    Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It chapter contains the following sections: • Product Overview • Appearance
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 8
    Chapter 1 Get to Know About Your Router 1. 1. Product Overview TP-Link Wi-Fi 7 router, with the 802.11be Wi-Fi technology and the brand-new 6 GHz band, achieves Wi-Fi performance at its ultimate level. The new features of Wi-Fi 7 and 4k QAM dramatically improve throughput and increase the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 9
    Chapter 1 Get to Know About Your Router Status Blinking Top 10 LEDs Solid LED Exclamation Point Blinking LED Exclamation Point Blinking All LEDs Off Indication Establishing a WPS connection. The router is disconnected from the internet. The router is disconnected from the internet, and Wi-Fi is
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 10
    Chapter 1 1. 2. 2. Back Panel Get to Know About Your Router The following parts are located on the back panel. Item Description Power On/Off Button Press this button to power on or off the router. Power Port For connecting the router to a power socket via the provided power adapter. USB 3.0
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 11
    Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Router • Connect Your Router
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 12
    Chapter 2 Connect the Hardware 2. 1. Position Your Router • The product should not be located in a place where it will be exposed to moisture or excessive heat. • Place the router in a location where it can be connected to multiple devices as well as to a power source. • Make sure the cables and
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 13
    Chapter 2 Connect the Hardware 1 ) Find the SSIDs (Network Names) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network. Computer Smart Device
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 14
    Chapter 3 Log In to Your Router
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 15
    Chapter 3 Log In to Your Router With a web-based utility, it is easy to configure and manage the router. The web-based utility can be used on any Windows, Mac OS or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. Follow the steps below to log in to
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 16
    successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provides IPv6 service. It contains the following sections: • Use Quick Setup Wizard • Quick Setup Via TP-Link Tether App • Manually Set Up Your Internet Connection • Set Up the Router as an Access Point • Set Up
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 17
    4. 1. Use Quick Setup Wizard The Quick Setup Wizard will guide you to set up your router. Tips: If you need router to the internet. Then follow the step-by-step instructions to connect your router to the internet. 3. To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS, and
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 18
    and enjoy the internet! 4. 3. Manually Set Up Your Internet Connection In this modify the settings according to the service information provided by your ISP. Follow connection type from the drop-down list. 4. Follow the instructions on the page to continue the configuration. Parameters on the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 19
    Chapter 4 Set Up Internet Connection 2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields. 3 ) If you choose PPPoE, enter the username and password provided by your ISP. PPPoE users usually have DSL cable modems. 15
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 20
    page, please go to Advanced > Network > Internet to complete the configuration. • If you still cannot access the internet, refer to the FAQ section for further instructions. 16
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 21
    Confirm the information and click SAVE. Now, you can enjoy Wi-Fi. Tips: • Functions, such as Parental Controls, QoS and NAT Forwarding, are not supported in the Access Point mode. • Functions, such as Guest Network, are the same as those in the Router mode. 4. 5. Set Up an IPv6 Internet Connection
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 22
    Chapter 4 Set Up Internet Connection • Set up an IPv6 Internet Connection 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > IPv6. 3. Enable IPv6 and select the internet connection type provided by your ISP. Tips: If you do
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 23
    if your ISP requires. Click SAVE and then click CONNECT. Note: If your ISP provides two separate accounts for the IPv4 and IPv6 connections, manually enter the username and password for the IPv6 connection. 4 ) 6to4 Tunnel: An IPv4 internet connection type is a prerequisite for this connection type
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 24
    Chapter 4 Set Up Internet Connection 5 ) Pass-Through (Bridge): Click SAVE and skip to Step 6. 5. Configure LAN ports. Windows users are recommended to choose from DHCPv6 and SLAAC+Stateless DHCP. Fill in Address Prefix provided by your ISP, and click SAVE. 6. In MAC Clone section, set the MAC
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 25
    from the drop-down list of Service Type. The Port and Protocol will be automatically filled in. It is recommended to keep the default Port and Protocol if you are unsure about which to use. If the service is not listed, please manually enter the Service Type, and specify the Port and Protocol
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 26
    Chapter 4 Set Up Internet Connection 6. In the Internal IP field, enter a valid IPv6 address to run the service. You can click Select from clients, choose a local host device, and its IPv6 address will be automatically filled in as the Internal IP. 7. Click SAVE,
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 27
    Chapter 5 TP-Link Cloud Service TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your router with a TP-Link ID, and you can easily monitor and manage your
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 28
    Chapter 5 TP-Link Cloud Service 5. 1. Register a TP-Link ID If you have skipped the registration during the ID or click TP-Link ID on the very top of the page. 3. Click Sign Up and follow the instructions to register a TP-Link ID. 4. After activating your TP-Link ID, come back to the TP-Link ID
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 29
    Chapter 5 TP-Link Cloud Service • To change your password: 1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save. 5. 3. Manage the User TP-Link IDs
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 30
    Chapter 5 TP-Link Cloud Service from the same router as Users. All accounts can monitor and manage the router locally or remotely, but user accounts cannot: • Reset the router to
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 31
    Chapter 5 TP-Link Cloud Service 5. 4. Manage the Router via the TP-Link Tether App The Tether app runs on iOS and Android devices, such as smartphones and tablets. 1. Launch the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 32
    Chapter 6 Network Map
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 33
    Chapter 6 Network Map Network Map outlines device connectivity of your network visually and helps you manage general settings of the network. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Network Map. 3. Click each network device
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 34
    Chapter 6 Network Map • Click Mesh Devices to view the devices that form a mesh network with the router. • Click Clients to view the client devices in your network. You can block devices so they cannot access your network, or set Speed Limit to limit their upload and download speeds. 30
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 35
    Chapter 6 Network Map To limit the speeds of a device: 1. Click in the Speed Limit column. 2. Enable Speed Limit. 3. Set the download and upload speed limit according to your needs. 4. Click SAVE. The speeds of the device will be limited. 31
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 36
    Chapter 7 Wireless Settings This chapter guides you on how to configure the wireless settings. It contains the following sections: • Specify Wireless Settings • Schedule Your Wireless Function • Use WPS for Wireless Connection • Advanced Wireless Settings
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 37
    Chapter 7 Wireless Settings 7. 1. Specify Wireless Settings The router's wireless network names (SSIDs), password, and security option are preset in the factory. The preset SSIDs and password can be found on the label of the router. You can customize the wireless settings according to your needs.
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 38
    means MU-MIMO can provide a faster, more efficient Wi-Fi network for multiusers. It is disabled by default. Note: Devices supporting 5GHz wireless band can enjoy the MU-MIMO service. 1. Go to Advanced > Wireless > Wireless Settings. 2. Select OFDMA+MU-MIMO or OFDMA only. • To use the Smart Connect
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 39
    . 2. Select Hide SSID, and your SSID won't display when you scan for local wireless networks on your wireless device and you need to manually join the network. • To change the security option: 1. Go to Advanced > Wireless > Wireless Settings. 2. Select an option from the Security drop-down list
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 40
    guests. 7. If you select Hide SSID, your SSID won't display when you scan for local wireless networks on your wireless device and you need to manually join the MLO network. 8. Click SAVE to save your settings. Tips: To view the MLO network information, go to Network Map and locate the Wireless
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 41
    Chapter 7 Wireless Settings 4. Click Add to specify a wireless off period during which you need the wireless off automatically, and click SAVE. Note: • The Effective Time Schedule is based on the time of the router. You can go to Advanced > System > Time & Language to modify the time. • The
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 42
    use the default PIN or generate a new one. Note: PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is printed on the label of the router. 7. 3. 3. Push the WPS Button
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 43
    Chapter 7 Wireless Settings 7. 4. Advanced Wireless Settings Check advanced wireless settings for your device. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Additional Settings. 3. Configure advanced wireless
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 44
    Chapter 7 Wireless Settings • Airtime Fairness - This function can improve the overall network performance by sacrificing a little bit of network time on your slow devices. • Beacon Interval - Enter a value between 40 and 1000 in milliseconds to determine the duration between beacon packets that
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 45
    Chapter 8 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize guest network options to ensure network
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 46
    Tick the Enable checkbox for the 2.4GHz, 5 GHz, or 6GHz wireless network. 2 ) Customize the SSID. Don't select Hide SSID unless you want your guests to manually input the SSID for guest network access. 3 ) Enable Bandwidth Control if you want to limit the network speed of your guests. Then enter the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 47
    Chapter 8 Guest Network Tips: To view guest network information, go to Network Map and locate the Guest Network section. You can turn on or off the guest network function conveniently. 8. 2. Customize Guest Network Options 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 48
    Chapter 9 IoT Network
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 49
    make sure your IoT devices can connect to a 5 GHz network. 2 ) Customize the SSID. Don't select Hide SSID unless you want your IoT devices to manually input the SSID for network access. 3 ) Select the Security type and customize your own password. If No security is selected, no password is needed to
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 50
    the USB ports to share files and media from the USB storage devices over your home network locally, or remotely through the internet. The router supports USB external flash drives and hard drives. It contains the following sections: • Access the USB Storage Device • Media Sharing • Time Machine
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 51
    Chapter 10 USB Settings 10. 1. Access the USB Storage Device Insert your USB storage device into the router's USB port and then access files stored there locally or remotely. Tips: • If you use USB hubs, make sure no more than 4 devices are connected to the router. • If the USB storage device
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 52
    Chapter 10 USB Settings • Method 2: Open the Windows Explorer (or go to Computer) and type the server address \\tplinkwifi.net or ftp://tplinkwifi.net in the address bar, then press Enter. Windows computer 1 ) Select Go > Connect to Server. 2 ) Type the server address smb://tplinkwifi.net. 3 )
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 53
    Chapter 10 USB Settings • Share photos and other large files with your friends without logging in to (and paying for) a photo-sharing site or email system. • Get a safe backup for the materials for a presentation. • Remove the files on your camera's memory card from time to time during the journey
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 54
    network files management, which can resume broken file transfers. Use a third-party app for network files management. Tips: Click Set Up a Dynamic DNS Service Account to learn how to set up a domain name for you router. 10. 1. 3. Customize the Access Settings By default, all the network clients
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 55
    Chapter 10 USB Settings 2. Now you can access the USB storage device by visiting \\MyShare (for Windows) or smb://MyShare (for Mac). • To Only Share Specific Content Focus on the File Sharing section. Specify sharing folders that you want to share and click SAVE. • To Set Up Authentication for
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 56
    credential mechanism may cause the following problems: • If the sharing password is on the USB storage device directly from DLNA-supported devices, such as your computer, tablet and storage device is inserted into the router, your DLNA-supported devices (such as your computer and pad) connected to
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 57
    -share by default) in the Media Devices section. Note: Here we take Windows 7 as an example. Windows Computer Tablet • Use a third-party DLNA-supported player. 10. 3. Time Machine Time Machine backs up all files on your Mac computer to a USB storage device connected to your router. 1. Visit http
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 58
    Chapter 10 3. Tick the checkbox to enable Time Machine. 4. Click SELECT to select a location for Time Machine backups. 5. Set the Size Limit for Backups. Note: 0 means no limit for the space. 6. Click SAVE. USB Settings 54
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 59
    Chapter 11 HomeShield Customize your home network with enhanced security using a kit of features built in TP-Link HomeShield. Whether protecting your sensitive data or limiting the access of kids and guests, TP-Link HomeShield provides you the tools you need to fully manage your network. It contains
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 60
    Chapter 11 HomeShield 11. 1. Network Check Scan your whole network to help analyze and optimize your network. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > HomeShield > Network Check. 3. Click SCAN. 4. Optimize your
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 61
    Chapter 11 HomeShield 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > HomeShield > Parental Controls. 3. Click to create a profile for a family member. 4. Add basic profile information. 1 ) Enter a Name for the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 62
    Chapter 11 HomeShield 1 ) Select the content categories to block in the Content Filter list. 2 ) You can also block a specific website. Enter a keyword (for example, "Facebook") or a URL (for example, "www.facebook.com"), then click Add. 3 ) Click NEXT. 6. Set time restrictions on internet access
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 63
    Chapter 11 HomeShield 4 ) Enable Bed Time and use the up/down arrows or enter times in the fields. Devices under this profile will be unable to access the internet during this time period. 5 ) Click SAVE. 6 ) After adding a profile, you can click the Insight icon to check the detailed visited
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 64
    Chapter 11 HomeShield 11. 3. QoS QoS (Quality of Service) allows you to prioritize connection of specific devices for a set duration. Devices set as you set for the router. 2. Go to Advanced > HomeShield > More Features. 3. Follow the web instructions to get full features of HomeShield. 60
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 65
    Chapter 11 HomeShield 61
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 66
    Chapter 12 EasyMesh with Seamless Roaming This product is compatible with EasyMesh. This chapter introduces the EasyMesh feature. It contains the following sections: • Add a Router as a Satellite Device • Add a Range Extender as a Satellite Device • Manage Devices in the EasyMesh Network
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 67
    set for the router. 2. Go to Advanced > EasyMesh, and enable EasyMesh. 3. Click ADD SATELLITE DEVICES, select TP-Link Router, then click NEXT. 4. Follow the page instructions to prepare your satellite router, then click DONE. 63
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 68
    Chapter 12 EasyMesh with Seamless Roaming 5. Click ADD. When prompted "This device has been added successfully", click OK, then click FINISH. 12. 2. Add a Range Extender as a Satellite Device 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 69
    Chapter 12 EasyMesh with Seamless Roaming 3. Plug in the extender next to the main router. 4. With in 2 minutes, press the WPS button on main router and on the extender. Wait until the WPS process is complete. 5. Done! You can check the mesh device on the router's web page too. 65
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 70
    Chapter 12 EasyMesh with Seamless Roaming 12. 3. Manage Devices in the EasyMesh Network In an EasyMesh network, you can manage all mesh devices and connected clients on your main router's web page. • To view mesh devices and connected clients in the network: 1. Visit http://tplinkwifi.net, and
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 71
    Chapter 13 Network Security This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can protect your
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 72
    Chapter 13 Network Security 13. 1. Protect the Network from Cyber Attacks The SPI (Stateful Packet Inspection) Firewall protects the router from cyber attacks and validate the traffic that is passing through the router based on the protocol. This function is enabled by default. 1. Visit http://
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 73
    Chapter 13 Network Security 2 ) Click and select devices you want to be blocked and Click ADD. 3 ) The Operation Succeeded message will appear on the screen, which means the selected devices have been successfully added to the Deny List. To allow specific device(s): 1 ) Select Allow List and
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 74
    will appear on the screen, which means the selected devices have been successfully added to the Allow List. • Add unconnected devices 1 ) Click Add Manually. 2 ) Enter the Device Name and MAC Address of the device you want to be allowed and click ADD. 3 ) The Operation Succeeded message will
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 75
    Chapter 13 Network Security I want to: Prevent ARP spoofing and ARP attacks. How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > IP & MAC Binding. 3. Enable IP & MAC Binding. 4. Bind your
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 76
    need to worry about ARP spoofing and ARP attacks! 13. 4. ALG ALG allows customized NAT traversal filters to be plugged into the gateway to support address and port translation for certain application layer "control/data" protocols such as FTP, TFTP, H323 etc. It is recommended to keep the default
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 77
    Chapter 13 Network Security 13. 5. Device Isolation Some devices, such as IoT devices, are vulnerable to security threats. To keep your important devices and data safe, you can isolate these devices to protect your network from being infected. 1. Visit http://tplinkwifi.net, and log in with your
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 78
    IP addresses of the devices. However, it also brings about the problem that an external host cannot initiatively communicate with a specified device on the local network, thus realizing some special functions. The TP-Link router supports four forwarding rules. If two or more rules are set, the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 79
    , such as HTTP, FTP, DNS, POP3/SMTP and Telnet. Different services use different service ports. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service port number before the configuration. I want to: Share my personal
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 80
    recommended to keep the default settings of Internal Port and Protocol if you are not clear about which port and protocol to use. • If the service you want to use is not in the common services list, you can enter the corresponding parameters manually. You should verify the port number that the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 81
    IP is assigned dynamically by the ISP, it is recommended to apply and register a domain name for the WAN referring to Set Up a Dynamic DNS Service Account. Then users on the internet can use http:// domain name to visit the website. • If you have changed the default External Port, you should
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 82
    application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify the external ports the application uses first and enter them into External a team with other players. To solve this problem, set your PC as a DMZ host with all ports open. 78
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 83
    be automatically filled in. Or enter the PC's IP address 192.168.0.100 manually in the DMZ Host IP Address field. 5. Click SAVE. Done! The this router. • Only the application supporting UPnP protocol can use this feature. • UPnP feature needs the support of operating system (e.g. Windows Vista/
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 84
    Chapter 14 NAT Forwarding corresponding ports allowing the following data penetrating the NAT to transmit. Therefore, you can play Xbox online games without a hitch. *Image may differ from your actual product. INTERNET If necessary, you can follow the steps to change the status of UPnP. 1. Visit
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 85
    home network in a secured way through the internet. The router supports three types of VPN Server: OpenVPN is somewhat complex but with L2TP/IPSec VPN is more secure but slower than PPTP VPN, and may have trouble getting around firewalls. WireGuard VPN is a secure, fast and modern VPN protocol.
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 86
    > VPN Server > OpenVPN, and tick the Enable box of OpenVPN. Note: • Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time with internet. • The first time you configure the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 87
    Chapter 15 VPN Server&Client 5. In the VPN Subnet/Netmask fields, enter the range of IP addresses that can be leased to the device by the OpenVPN server. 6. Select your Client Access type. Select Home Network Only if you only want the remote device to access your home network; select Internet and
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 88
    Go to Advanced > VPN Server > PPTP, and tick the Enable box of PPTP. Note: Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time with internet. 3. In the Client IP Address field
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 89
    Chapter 15 VPN Server&Client 2 ) Enter the Username and Password to authenticate devices to the PPTP VPN Server. 3 ) Click ADD. Step 2. Configure PPTP VPN Connection on Your Remote Device The remote device can use the Windows built-in PPTP software or a third-party PPTP software to connect to
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 90
    Chapter 15 VPN Server&Client 4. Select Use my Internet connection (VPN). 5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 86
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 91
    Chapter 15 VPN Server&Client 6. Enter the User name and Password you have set for the PPTP VPN server on your router, and click Connect. 7. Click Connect Now when the VPN connection is ready to use. 87
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 92
    VPN Server > L2TP/IPSec, and enable L2TP/IPSec. Note: • Firmware update may be required to support L2TP/IPSec VPN Server. • Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 93
    Chapter 15 VPN Server&Client 3. In the Client IP Address field, enter the range of IP addresses (up to 10) that can be leased to the devices by the L2TP/IPSec VPN server. 4. Keep IPSec Encryption as Encrypted and create an IPSec Pre-Shared Key. 5. Click SAVE. 6. Configure the L2TP/IPSec VPN
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 94
    Chapter 15 VPN Server&Client The remote device can use the Windows or Mac OS built-in L2TP/IPSec software or a third-party L2TP/IPSec software to connect to L2TP/IPSec Server. Here we use the Windows built-in L2TP/IPSec software as an example. 1. Go to Start > Control Panel > Network and Internet
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 95
    Chapter 15 4. Select Use my Internet connection (VPN). VPN Server&Client 5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field, and select the checkbox Don't connect now; just set it up so I can connect later. Click Next. 6. Enter the User name
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 96
    Chapter 15 VPN Server&Client 7. Click Close when the VPN connection is ready to use 8. Go to Network and Sharing Center and click Change adapter settings. 92
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 97
    Chapter 15 VPN Server&Client 9. Find the VPN connection you created, then double-click it. 10. Enter the User name and Password you have set for the L2TP/IPSec VPN server on your router, and click Properties. 93
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 98
    Chapter 15 VPN Server&Client 11. Switch to the Security tab, select Layer 2 Tunneling Protocol with IPsec (L2TP/ IPSec) and click Advanced settings. 12. Select Use preshared key for authentication and enter the IPSec Pre-Shared Key you have set for the L2TP/IPSec VPN server on your router. Then
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 99
    Chapter 15 VPN Server&Client 15. 4. Use WireGuard VPN to Access Your Home Network WireGuard VPN Server is used to create a Wire Guard VPN connection for remote devices to access your home network. Step 1. Set up WireGuard VPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 100
    Chapter 15 VPN Server&Client 3. Set the Tunnel IP Address and Listen Port. Do NOT change it unless necessary. 4. Select your Client Access type. Select Home Network Only if you only want the remote device to access your home network; select Internet and Home Network if you also want the remote
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 101
    Chapter 15 VPN Server&Client 8. Connect to the WireGuard server. • For mobile phones, download WireGuard App from Google Play or Apple Store, then use the App to scan the QR Code to connect to this server. • For other devices (e.g. TP-Link WireGuard VPN client), Click EXPORT to save the WireGuard
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 102
    with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Client. Note: Firmware update may be required to support VPN Client. 3. Enable VPN Client, then save the settings. 4. Add VPN servers, and enable the one you need. 1 ) In the Server List section, click Add
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 103
    the configuration file provided by your VPN provider. Note: You can also check the box of Import the CA file or edit the . ovpn file manually, then upload the CA file or
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 104
    Chapter 15 VPN Server&Client • PPTP: Enter the VPN server address (for example: 218.18.1.73) and the VPN username and password provided by your VPN provider. • L2TP/IPSec VPN: Enter the VPN server address (for example: 218.18.1.73), VPN username and password, and IPSec pre-shared key provided by
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 105
    Chapter 15 VPN Server&Client • WireGuard VPN: Give a description, and click BROWSE to import the WireGuard VPN server configuration. Then you will see the detailed parameters. Do NOT change the parameters unless necessary. 101
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 106
    Chapter 15 VPN Server&Client 4 ) Save the settings. 5 ) In the server list, enable the VPN server you need. 102
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 107
    Chapter 15 VPN Server&Client 5. Add and manage the devices that will use the VPN function. 1 ) In the Device List section, click Add. 2 ) Choose and add the devices that will access the VPN server you have configured. 6. Save the settings. 103
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 108
    Chapter 15 VPN Server&Client Done! Now the devices you specified can access the VPN server you enabled. 104
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 109
    Chapter 16 Customize Your Network Settings This chapter guides you on how to configure advanced network features. It contains the following sections: • Change the Internet Settings • Change the LAN Settings • Configure to Support IPTV Service • Specify DHCP Server Settings • Set Up a Dynamic DNS
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 110
    Chapter 16 Customize Your Network Settings 16. 1. Change the Internet Settings After setting up your internet, you can also easily change the internet settings if needed in the future. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 111
    Chapter 16 Customize Your Network Settings You have three options: • Use Default MAC Address - Do not change the default MAC address of your router in case the ISP does not bind the assigned IP address to the MAC address. • Clone Current Device MAC - Select to copy the current MAC address of the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 112
    Chapter 16 Customize Your Network Settings 16. 2. Change the LAN Settings The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. If
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 113
    Chapter 16 Customize Your Network Settings 2. Go to Advanced > Network > LAN, and locate the Link Aggregation section. 3. Enable Link Aggregation. Note: To avoid LAN port conflicts, Link Aggregation and IPTV/VLAN cannot be enabled at the same time. 4. Select the Mode according to your need. It's
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 114
    Chapter 16 Customize Your Network Settings 16. 5. Configure to Support IPTV Service I want to: Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP). How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 115
    parameters, including the LAN port for IPTV connection, are predetermined. If not, select the LAN type to determine which port is used to support IPTV service. 4 ) Click SAVE. 5 ) Connect the set-top box to the corresponding LAN port which is predetermined or you have specified in Step 3. Done! Your
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 116
    the MAC Address will be automatically filled in. Or enter the MAC address of the client device manually. 3. Enter the IP address to reserve for the client device. 4. Click SAVE. 16. 7. Set Up a Dynamic DNS Service Account Most ISPs assign a dynamic IP address to the router and you can use this IP
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 117
    2. Go to Advanced > Network > Dynamic DNS. 3. Select the DDNS Service Provider: TP-Link, NO-IP or DynDNS. It is recommended to select TP-Link have to register first by clicking Register Now. Note: To enjoy TP-Link's DDNS service, you have to log in with a TP-Link ID. If you have not logged
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 118
    8. Create Static Routes Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. I want to: Visit
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 119
    Chapter 16 Customize Your Network Settings *Image may differ from your actual product. Router A Router B Company's server LAN: 192.168.0.1 Switch WAN: 172.30.30.100 LAN: 192.168.0.2 172.30.30.1 PC 192.168.0.100 How can I do that? 1. Change the routers' LAN IP addresses to two different
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 120
    Chapter 16 Customize Your Network Settings network is a single IP, so here enter 255.255.255.255. Default Gateway: The IP address of the gateway device to which the data packets will be sent. This IP address must be on the same subnet with the router's IP which sends out data. In the example, the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 121
    Chapter 17 Manage the Router This chapter will show you the configuration for managing and maintaining your router. It contains the following sections: • Update the Firmware • Backup and Restore Configuration Settings • Change the Login Password • Password Recovery • Local Management • Remote
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 122
    router. Also, the latest firmware will be released at the TP-Link official website www.tp-link.com, and you can download it from the Support page for free. Note: • Back up your router's configurations before firmware update. • Do NOT turn off the router during the firmware update. 17. 1. 1. Auto
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 123
    Chapter 17 Manage the Router 3. Focus on the Online Update section, and click UPDATE if there is new firmware. 4. Wait a few minutes for the update and reboot to complete. Tips: If there's a new and important firmware update for your router, you will see the prompt notification on your computer
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 124
    minutes for the update and reboot to complete. Note: If you fail to update the firmware for the router, please contact our Technical Support. 17. 1. 4. EasyMesh Satellite Update EasyMesh Satellite Update allows you to remotely check and update the firmware of the satellite devices connected to this
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 125
    Chapter 17 Manage the Router • To restore configuration settings: 1. Click BROWSE to locate the backup configuration file stored on your computer, and click RESTORE. 2. Wait a few minutes for the restoring and rebooting. Note: During the restoring process, do not turn off or reset the router. •
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 126
    Chapter 17 Manage the Router Note: • During the resetting process, do not turn off or reset the router. • We strongly recommend you backup the current configuration settings before resetting the router. 17. 3. Change the Login Password The account management feature allows you to change your
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 127
    password. 5. Click SAVE. To recover the login password, please visit http://tplinkwifi.net, click Forgot Password? on the login page and follow the instructions to set a new password. 17. 5. Local Management This feature allows you to limit the number of client devices on your LAN from accessing
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 128
    Chapter 17 Manage the Router • Allow all LAN connected devices to manage the router: Select All Devices for Local Managers. • Allow specific devices to manage the router: 1. Select All Devices for Local Managers and click SAVE. 2. Click Add Device. 124
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 129
    from the Connected Devices list, or enter the MAC address of the device manually. 4. Specify a Description for this entry. 5. Click SAVE. 17. IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. • Allow
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 130
    Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. 17. 7. System Log When the router does not work normally, you can save the system log and send it to the technical support for troubleshooting. • To save the system log locally: 1. Visit
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 131
    Chapter 17 Manage the Router 4. In the Save Log section, click SAVE TO LOCAL to save the system logs to a local disk. • To send the system log to a mailbox at a fixed time: For example, I want to check my router's working status at a fixed time every day, however, it's too troublesome to log in to
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 132
    Chapter 17 Manage the Router 1 ) Email From: Enter the email address used for sending the system log. 2 ) Select Require Password. Tips: Generally, Require Password should be selected if the login of the mailbox requires username and password. 3 ) Username: Enter the email address used for sending
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 133
    Chapter 17 Manage the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Diagnostics. 3. Enter the information: 1 ) Choose Ping or Traceroute as the diagnostic tool to test the connectivity; • Ping is used to
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 134
    Chapter 17 Manage the Router The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through Traceroute. 17. 9. Set System Time and Language System time is the time displayed while the router is running. The system time you configure here
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 135
    Time field, select Get from Managing Device. 2. The time of your computer will then be displayed and click SAVE. • To manually set the date and time: 1. In the Set Time field, select Manually. 2. Set the current Date (In MM/DD/YYYY format). 3. Set the current Time (In HH/MM/SS format). 4. Click
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 136
    Chapter 17 Manage the Router 2. Select the correct Start date and time when daylight saving time starts at your local time zone. 3. Select the correct End date and time when daylight saving time ends at your local time zone. 4. Click SAVE. • To set system language: Select the language from the
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 137
    Chapter 17 Manage the Router 4. Specify the Reboot Time when the router reboots and Repeat to decide how often it reboots. 5. Click SAVE. 17. 11. Control the LED The LED of the router indicates its activities and status. You can enable the Night Mode feature to specify a time period during which
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 138
    to log in, or you have enabled the Password Recovery feature of the router, click Forgot password on the login page and then follow the instructions to reset it. • Alternatively, press and hold the Reset button of the router until the Power LED blinks to restore factory default settings, and then
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 139
    4 ) Click LAN settings and deselect the following three options and click OK. 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 135
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 140
    settings and try again. If login still fails, please contact the technical support. Note: You'll need to reconfigure the router to surf the internet try again: • Your computer might not recognize any DNS server addresses. Please manually configure the DNS server. 1 ) Go to Advanced > Network > DHCP
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 141
    • Restart the modem and the router. 1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it gets a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. •
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 142
    existing ADSL modem/router. If so, the router is not able to communicate with your modem and you can't access the internet. To resolve this problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168.2.1. 1 ) Visit http://tplinkwifi.net, and log
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 143
    . • Please upgrade the firmware of the router. If you've tried every method above but still cannot access the internet, please contact the technical support. Q5. What should I do if I can't find my wireless network or I cannot connect the wireless network? If you fail to find any wireless network
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 144
    function is disabled or blocked somehow. 2 ) Click Troubleshoot and windows might be able to fix the problem by itself. • On Windows XP 1 ) ) Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK. If you can find other wireless network
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 145
    2 ) If you cannot find the PIN or PIN failed, you may choose Connecting using a security key instead, and then type in the Wireless Password/Network Security Key. 3 ) If it continues to show note of Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 146
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 147
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 148
    • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 149
    /125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/ RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 150
    and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca National Restrictions Attention: This device may only be used indoors in Great Britain. UK 146
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 151
    Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 152
    5,925-7,125 GHz est interdite pour le contrôle ou les communications avec des systèmes d'avions sans pilote. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 153
    • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended. • Do
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 154
    • Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't hesitate to contact us. • Operating Temperature: 0℃ ~ 40℃ (32℉ ~ 104℉) • This product uses radios and other components that emit electromagnetic fields.
  • TP-Link Archer BE550 | Archer BE550US V1.6 User Guide - Page 155
    Symbol Explanation Frame or chassis Functional earthing Caution, hot surface Caution Operator's manual Stand-by "ON"/"OFF" (push-push) Fuse Fuse is used in neutral N RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
© 2023 TP-Link
1910013423
REV1.0.0
User Guide
BE9300 Tri-Band Wi-Fi 7 Router
Archer BE550