TP-Link Archer BE800 Archer BE800US V1.6 User Guide

TP-Link Archer BE800 Manual

Get TP-Link Archer BE800 PDF manuals and user guides View all TP-Link Archer BE800 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link Archer BE800 manual content summary:

  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 1
    User Guide BE19000 Tri-Band Wi-Fi 7 Router Archer BE800 © 2023 TP-Link 1910013397 REV1.0.0
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 2
    Contents About This Guide 1 Chapter 1. Get to Know About Your Router Quick Setup Via TP-Link Tether App 14 4. 3. Manually Set Up Your Internet Connection 15 4. 4. Set Up Set Up an IPv6 Internet Connection 19 Chapter 5. TP-Link Cloud Service 23 5. 1. Register a TP-Link ID 24 5. 2. Change
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 3
    7. 4. Advanced Settings 40 Chapter 8. Wireless Settings 41 8. 1. Specify Wireless Settings 42 8. 2. Schedule Your Wireless Function 45 8. 3. Use WPS for Wireless Connection 46 8. 3. 1.Connect via the Client's PIN 46 8. 3. 2.Connect via the Router's PIN 47 8. 3. 3.Push the WPS Button 47 8.
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 4
    16. 1. Change the Internet Settings 107 16. 2. Change the LAN Settings 109 16. 3. Configure to Support IPTV Service 109 16. 4. Specify DHCP Server Settings 111 16. 5. Set Up a Dynamic DNS Service Account 112 16. 6. Create Static Routes 113 Chapter 17. Manage the Router 116 17. 1. Update the
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 5
    Guide This guide is a complement of Quick Installation Guide. The Quick Installation Guide instructs you on quick internet setup, and this guide Center at https://www.tp-link.com/support/download. The Quick Installation Guide can be found where you find this guide or inside the package of the router
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 6
    -Fi 6E, and features including OFDMA, 1024-QAM, and HE160 require clients to also support the corresponding features. Seven 160MHz channels may not be all available in the 6 GHz LAN port, the rate supported by the network cable, Internet service provider factors and other environmental conditions. 2
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 7
    Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It chapter contains the following sections: • Product Overview • Appearance
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 8
    Chapter 1 Get to Know About Your Router 1. 1. Product Overview TP-Link Wi-Fi 7 router, with the 802.11be Wi-Fi technology and the brand-new 6 GHz band, achieves Wi-Fi performance at its ultimate level. The new features of Wi-Fi 7 and 4k QAM dramatically improve throughput and increase capacity
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 9
    Chapter 1 Get to Know About Your Router Status Indication Establishing a WPS connection. If successful, a √ will appear, if failed, an × will appear The router is being upgraded. The router is disconnected from the internet. LEDs in the top are pulsing in a line, indicating Wi-Fi is off. Buttons
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 10
    cannot be used as the WAN port at the same time. If you choose to one of the ports as the WAN port for internet service, the other ports will be used as LAN port by default. It's recommended to use the RJ45 port in the 10Gbps WAN/LAN Combo pair
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 11
    Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Router • Connect Your Router
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 12
    the router's 10Gbps Combo port to the internet via Ethernet or fiber network. Note: Note: If you want to change the WAN port for internet service, go to the Tether app or web management page to configure it. 1 3 Combo 10 Gbps WAN/LAN 1 2 10 Gbps SFP+ Keep the router vertical Connect
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 13
    Chapter 2 Connect the Hardware Turn off the Wi-Fi on your computer and connect the devices to the LAN port of your router. • Method 2: Wirelessly 1 ) Find the SSIDs (Network Names) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 14
    Chapter 3 Log In to Your Router
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 15
    Chapter 3 Log In to Your Router With a web-based utility, it is easy to configure and manage the router. The web-based utility can be used on any Windows, Mac OS or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. Follow the steps below to log in to
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 16
    successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provides IPv6 service. It contains the following sections: • Use Quick Setup Wizard • Quick Setup Via TP-Link Tether App • Manually Set Up Your Internet Connection • Set Up the Router as an Access Point • Set Up
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 17
    4. 1. Use Quick Setup Wizard The Quick Setup Wizard will guide you to set up your router. Tips: If you need router to the internet. Then follow the step-by-step instructions to connect your router to the internet. 3. To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS, and
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 18
    wireless networks of the router and enjoy the internet! 4. 3. Manually Set Up Your Internet Connection In this part, you can check your set for the router. 2. Go to Internet. 3. Select a port for internet service. Make sure the cable is securely connected to this port on your router. 4. Select
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 19
    Chapter 4 Set Up Internet Connection 5. Follow the instructions on the page to continue the configuration. Parameters on the figures are just used for demonstration. 1 ) If you choose Dynamic IP, you need to select
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 20
    Chapter 4 Set Up Internet Connection 4 ) If you choose L2TP, enter the username and password and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection you have chosen. 5 ) If you choose PPTP, enter the username and password,
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 21
    go to Advanced > Network > Internet to complete the configuration. • If you still cannot access the internet, refer to the FAQ section for further instructions. 4. 4. Set Up the Router as an Access Point The router can work as an access point, transforming your existing wired network to a wireless
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 22
    Confirm the information and click SAVE. Now, you can enjoy Wi-Fi. Tips: • Functions, such as Parental Controls, QoS and NAT Forwarding, are not supported in the Access Point mode. • Functions, such as Guest Network, are the same as those in the Router mode. 4. 5. Set Up an IPv6 Internet Connection
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 23
    information if your ISP requires. Click SAVE and then click Connect. Note: If your ISP provides two separate accounts for the IPv4 and IPv6 connections, manually enter the username and password for the IPv6 connection. 19
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 24
    Chapter 4 Set Up Internet Connection 4 ) 6to4 Tunnel: An IPv4 internet connection type is a prerequisite for this connection type (Manually Set Up Your Internet Connection). Click Advanced to input further information if your ISP requires. Click SAVE and then click Connect. 5 ) Pass-Through (
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 25
    Chapter 4 Set Up Internet Connection 5. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by your ISP, and click SAVE. 6. Click Status to check whether you have successfully set up an IPv6 connection. Tips: Visit the FAQ section
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 26
    Chapter 5 TP-Link Cloud Service TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your router with a TP-Link ID, and you can easily monitor and manage your
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 27
    Chapter 5 TP-Link Cloud Service 5. 1. Register a TP-Link ID If you have skipped the registration during the ID or click TP-Link ID on the very top of the page. 3. Click Sign Up and follow the instructions to register a TP-Link ID. 4. After activating your TP-Link ID, come back to the TP-Link ID
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 28
    Chapter 5 TP-Link Cloud Service • To change your password: 1. Click behind the Password. 2. Enter the current password, then a new password twice. And click SAVE. 5. 3. Manage the User TP-Link IDs
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 29
    Chapter 5 TP-Link Cloud Service from the same router as Users. All accounts can monitor and manage the router locally or remotely, but user accounts cannot: • Reset the router to
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 30
    Chapter 5 TP-Link Cloud Service 5. 4. Manage the Router via the TP-Link Tether App The Tether app runs on iOS and Android devices, such as smartphones and tablets. 1. Launch the
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 31
    Chapter 6 Network Map
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 32
    Chapter 6 Network Map Network Map outlines device connectivity of your network visually and helps you manage general settings of the network. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Network Map. 3. Click each network device
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 33
    Chapter 6 Network Map • Click Mesh Devices to view the devices that form a mesh network with the router. 29
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 34
    Chapter 6 Network Map • Click Clients to view the client devices in your network. You can block devices so they cannot access your network, or set Speed Limit to limit their upload and download speeds. To limit the speeds of a device: 1. Click in the Speed Limit column. 2. Enable Speed Limit. 3.
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 35
    Chapter 7 Wireless Settings This chapter guides you on how to configure the wireless settings. It contains the following sections: • Specify Wireless Settings • Schedule Your Wireless Function • Use WPS for Wireless Connection • Advanced Wireless Settings
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 36
    Chapter 7 Wireless Settings 7. 1. Specify Wireless Settings The router's wireless network names (SSIDs), password, and security option are preset in the factory. The preset SSIDs and password can be found on the label of the router. You can customize the wireless settings according to your needs.
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 37
    or disable OFDMA: OFDMA enables multiple users to transmit data simultaneously, and thus greatly improves speed and efficiency. Noted that only when your clients also support OFDMA, can you fully enjoy the benefits. It is disabled by default. 1. Go to Advanced > Wireless > Wireless Settings. 33
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 38
    > Wireless Settings. 2. Select Hide SSID, and your SSID won't display when you scan for local wireless networks on your wireless device and you need to manually join the network. 34
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 39
    select a transmission Mode according to your wireless client devices. It is recommended to just leave it as default. The 6 GHz network only supports 802.11ax mode, which cannot be changed. 7. 2. Schedule Your Wireless Function The wireless network can be automatically off at a specific time when
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 40
    Chapter 7 Wireless Settings 4. Click Add to specify a wireless off period during which you need the wireless off automatically, and click SAVE. Note: • The Effective Time Schedule is based on the time of the router. You can go to Advanced > System > Time & Language to modify the time. • The
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 41
    use the default PIN or generate a new one. Note: PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is printed on the label of the router. 7. 3. 3. Push the WPS Button
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 42
    Chapter 7 Wireless Settings 7. 4. Advanced Wireless Settings Check advanced wireless settings for your device. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Additional Settings. 3. Configure advanced wireless
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 43
    Chapter 7 Wireless Settings • AP Isolation - This function isolates all connected wireless stations so that wireless stations cannot access each other through WLAN. • Airtime Fairness - This function can improve the overall network performance by sacrificing a little bit of network time on your
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 44
    Chapter 8 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize guest network options to ensure network
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 45
    Enable checkbox for the 2.4GHz, 5 GHz-1, 5GHz-2 or 6GHz wireless network. 2 ) Customize the SSID. Don't select Hide SSID unless you want your guests to manually input the SSID for guest network access. 3 ) Enable Bandwidth Control if you want to limit the network speed of your guests. Then enter the
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 46
    Chapter 8 Guest Network Tips: To view guest network information, go to Network Map and locate the Guest Network section. You can turn on or off the guest network function conveniently. 8. 2. Customize Guest Network Options 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 47
    the USB ports to share files and media from the USB storage devices over your home network locally, or remotely through the internet. The router supports USB external flash drives and hard drives. It contains the following sections: • Access the USB Storage Device • Media Sharing • Time Machine
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 48
    Chapter 9 USB Settings 9. 1. Access the USB Storage Device Insert your USB storage device into the router's USB port and then access files stored there locally or remotely. Tips: • If you use USB hubs, make sure no more than 4 devices are connected to the router. • If the USB storage device
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 49
    Chapter 9 USB Settings • Method 2: Open the Windows Explorer (or go to Computer) and type the server address \\tplinkwifi.net or ftp://tplinkwifi.net in the address bar, then press Enter. Windows computer 1 ) Select Go > Connect to Server. 2 ) Type the server address smb://tplinkwifi.net. 3 )
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 50
    Chapter 9 USB Settings • Share photos and other large files with your friends without logging in to (and paying for) a photo-sharing site or email system. • Get a safe backup for the materials for a presentation. • Remove the files on your camera's memory card from time to time during the journey.
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 51
    network files management, which can resume broken file transfers. Use a third-party app for network files management. Tips: Click Set Up a Dynamic DNS Service Account to learn how to set up a domain name for you router. 9. 1. 3. Customize the Access Settings By default, all the network clients
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 52
    Chapter 9 USB Settings 2. Now you can access the USB storage device by visiting \\MyShare (for Windows) or smb://MyShare (for Mac). • To Only Share Specific Content Focus on the File Sharing section. Specify sharing folders that you want to share and click SAVE. • To Set Up Authentication for
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 53
    credential mechanism may cause the following problems: • If the sharing password is on the USB storage device directly from DLNA-supported devices, such as your computer, tablet and storage device is inserted into the router, your DLNA-supported devices (such as your computer and pad) connected to
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 54
    -share by default) in the Media Devices section. Note: Here we take Windows 7 as an example. Windows Computer Tablet • Use a third-party DLNA-supported player. 9. 3. Time Machine Time Machine backs up all files on your Mac computer to a USB storage device connected to your router. 1. Visit http
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 55
    Chapter 9 3. Tick the checkbox to enable Time Machine. 4. Click Select to select a location for Time Machine backups. 5. Set the Size Limit for Backups. Note: 0 means no limit for the space. 6. Click SAVE. USB Settings 51
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 56
    Chapter 10 HomeShield Customize your home network with enhanced security using a kit of features built in TP-Link HomeShield. Whether protecting your sensitive data or limiting the access of kids and guests, TP-Link HomeShield provides you the tools you need to fully manage your network. It contains
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 57
    Chapter 10 HomeShield 10. 1. Network Check Scan your whole network to help analyze and optimize your network. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > HomeShield > Network Check. 3. Click SCAN. 4. Optimize your
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 58
    Chapter 10 HomeShield 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > HomeShield > Parental Controls. 3. Click to create a profile for a family member. 4. Add basic profile information. 1 ) Enter a Name for the
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 59
    Chapter 10 HomeShield 1 ) Select the content categories to block in the Content Filter list. 2 ) You can also block a specific website. Enter a keyword (for example, "Facebook") or a URL (for example, "www.facebook.com"), then click Add. 3 ) Click NEXT. 6. Set time restrictions on internet access
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 60
    Chapter 10 HomeShield 4 ) Enable Bed Time and use the up/down arrows or enter times in the fields. Devices under this profile will be unable to access the internet during this time period. 5 ) Click SAVE. 6 ) After adding a profile, you can click the Insight icon to check the detailed visited
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 61
    Chapter 10 HomeShield 10. 3. QoS QoS (Quality of Service) allows you to prioritize connection of specific devices for a set duration. Devices set as you set for the router. 2. Go to Advanced > HomeShield > More Features. 3. Follow the web instructions to get full features of HomeShield. 57
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 62
    Chapter 10 HomeShield 58
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 63
    Chapter 11 EasyMesh with Seamless Roaming This product is compatible with EasyMesh. This chapter introduces the EasyMesh feature. It contains the following sections: • Add a Router as a Satellite Device • Add a Range Extender as a Satellite Device • Manage Devices in the EasyMesh Network
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 64
    set for the router. 2. Go to Advanced > EasyMesh, and enable EasyMesh. 3. Click ADD SATELLITE DEVICES, select TP-Link Router, then click NEXT. 4. Follow the page instructions to prepare your satellite router, then click DONE. 60
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 65
    Chapter 11 EasyMesh with Seamless Roaming 5. Click ADD. When prompted "This device has been added successfully", click OK, then click FINISH. 11. 2. Add a Range Extender as a Satellite Device 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 66
    Chapter 11 EasyMesh with Seamless Roaming 3. Plug in the extender next to the main router. 4. With in 2 minutes, press the WPS button on main router and on the extender. Wait until the WPS process is complete. 5. Done! You can check the mesh device on the router's web page too. 62
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 67
    Chapter 11 EasyMesh with Seamless Roaming 11. 3. Manage Devices in the EasyMesh Network In an EasyMesh network, you can manage all mesh devices and connected clients on your main router's web page. • To view mesh devices and connected clients in the network: 1. Visit http://tplinkwifi.net, and
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 68
    Chapter 12 Network Security This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can protect your
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 69
    Chapter 12 Network Security 12. 1. Protect the Network from Cyber Attacks The SPI (Stateful Packet Inspection) Firewall protects the router from cyber attacks and validate the traffic that is passing through the router based on the protocol. This function is enabled by default. 1. Visit http://
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 70
    Chapter 12 Network Security 2 ) Click and select devices you want to be blocked and Click ADD. 3 ) The Operation Succeeded message will appear on the screen, which means the selected devices have been successfully added to the blacklist. To allow specific device(s): 1 ) Select Whitelist and
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 71
    message will appear on the screen, which means the selected devices have been successfully added to the whitelist. • Add unconnected devices 1 ) Click Add Manually. 2 ) Enter the Device Name and MAC Address of the device you want to be allowed and click ADD. 3 ) The Operation Succeeded message will
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 72
    Chapter 12 Network Security I want to: Prevent ARP spoofing and ARP attacks. How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > IP & MAC Binding. 3. Enable IP & MAC Binding. 4. Bind your
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 73
    need to worry about ARP spoofing and ARP attacks! 12. 4. ALG ALG allows customized NAT traversal filters to be plugged into the gateway to support address and port translation for certain application layer "control/data" protocols such as FTP, TFTP, H323 etc. It is recommended to keep the default
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 74
    IP addresses of the devices. However, it also brings about the problem that an external host cannot initiatively communicate with a specified device on the local network, thus realizing some special functions. The TP-Link router supports four forwarding rules. If two or more rules are set, the
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 75
    , such as HTTP, FTP, DNS, POP3/SMTP and Telnet. Different services use different service ports. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service port number before the configuration. I want to: Share my personal
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 76
    are not clear about which port and protocol to use. • If the service you want to use is not in the common services list, you can enter the corresponding parameters manually. You should verify the port number that the service needs. • You can add multiple port forwarding rules if you want to provide
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 77
    IP is assigned dynamically by the ISP, it is recommended to apply and register a domain name for the WAN referring to Set Up a Dynamic DNS Service Account. Then users on the internet can use http:// domain name to visit the website. • If you have changed the default External Port, you should
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 78
    application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify the external ports the application uses first and enter them into External a team with other players. To solve this problem, set your PC as a DMZ host with all ports open. 74
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 79
    be automatically filled in. Or enter the PC's IP address 192.168.0.100 manually in the DMZ Host IP Address field. 5. Click SAVE. Done! The this router. • Only the application supporting UPnP protocol can use this feature. • UPnP feature needs the support of operating system (e.g. Windows Vista/
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 80
    Chapter 13 NAT Forwarding corresponding ports allowing the following data penetrating the NAT to transmit. Therefore, you can play Xbox online games without a hitch. INTERNET If necessary, you can follow the steps to change the status of UPnP. 1. Visit http://tplinkwifi.net, and log in with your
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 81
    home network in a secured way through the internet. The router supports three types of VPN Server: OpenVPN is somewhat complex but with L2TP/IPSec VPN is more secure but slower than PPTP VPN, and may have trouble getting around firewalls. WireGuard VPN is a secure, fast and modern VPN protocol.
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 82
    > VPN Server > OpenVPN, and tick the Enable box of OpenVPN. Note: • Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time with internet. • The first time you configure the
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 83
    Chapter 14 VPN Server&Client 6. Select your Client Access type. Select Home Network Only if you only want the remote device to access your home network; select Internet and Home Network if you also want the remote device to access internet through the VPN Server. 7. Click SAVE. 8. Click GENERATE
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 84
    Go to Advanced > VPN Server > PPTP, and tick the Enable box of PPTP. Note: Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time with internet. 3. In the Client IP Address field
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 85
    Chapter 14 VPN Server&Client 3 ) Click ADD. Step 2. Configure PPTP VPN Connection on Your Remote Device The remote device can use the Windows built-in PPTP software or a third-party PPTP software to connect to PPTP Server. Here we use the Windows built-in PPTP software as an example. 1. Go to
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 86
    Chapter 14 VPN Server&Client 4. Select Use my Internet connection (VPN). 5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 82
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 87
    Chapter 14 VPN Server&Client 6. Enter the User name and Password you have set for the PPTP VPN server on your router, and click Connect. 7. Click Connect Now when the VPN connection is ready to use. 83
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 88
    VPN Server > L2TP/IPSec, and enable L2TP/IPSec. Note: • Firmware update may be required to support L2TP/IPSec VPN Server. • Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 89
    Chapter 14 VPN Server&Client 3. In the Client IP Address field, enter the range of IP addresses (up to 10) that can be leased to the devices by the L2TP/IPSec VPN server. 4. Keep IPSec Encryption as Encrypted and create an IPSec Pre-Shared Key. 5. Click SAVE. 6. Configure the L2TP/IPSec VPN
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 90
    Chapter 14 VPN Server&Client The remote device can use the Windows or Mac OS built-in L2TP/IPSec software or a third-party L2TP/IPSec software to connect to L2TP/IPSec Server. Here we use the Windows built-in L2TP/IPSec software as an example. 1. Go to Start > Control Panel > Network and Internet
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 91
    Chapter 14 4. Select Use my Internet connection (VPN). VPN Server&Client 5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field, and select the checkbox Don't connect now; just set it up so I can connect later. Click Next. 6. Enter the User name
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 92
    Chapter 14 VPN Server&Client 7. Click Close when the VPN connection is ready to use 8. Go to Network and Sharing Center and click Change adapter settings. 88
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 93
    Chapter 14 VPN Server&Client 9. Find the VPN connection you created, then double-click it. 10. Enter the User name and Password you have set for the L2TP/IPSec VPN server on your router, and click Properties. 89
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 94
    Chapter 14 VPN Server&Client 11. Switch to the Security tab, select Layer 2 Tunneling Protocol with IPsec (L2TP/ IPSec) and click Advanced settings. 12. Select Use preshared key for authentication and enter the IPSec Pre-Shared Key you have set for the L2TP/IPSec VPN server on your router. Then
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 95
    Chapter 14 VPN Server&Client 14. 4. Use WireGuard VPN to Access Your Home Network WireGuard VPN Server is used to create a Wire Guard VPN connection for remote devices to access your home network. Step 1. Set up WireGuard VPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 96
    Chapter 14 VPN Server&Client 3. Set the tunnel IP address and listen port. Do NOT change it unless necessary. 4. Select your Client Access type. Select Home Network Only if you only want the remote device to access your home network; select Internet and Home Network if you also want the remote
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 97
    Chapter 14 VPN Server&Client 8. Connect to the WireGuard server. • For mobile phones, download WireGuard App from Google Play or Apple Store, then use the App to scan the QR Code to connect to this server. • For other devices (e.g. TP-Link WireGuard VPN client), Click EXPORT to save the WireGuard
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 98
    with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Client. Note: Firmware update may be required to support VPN Client. 3. Enable VPN Client, then save the settings. 4. Add VPN servers, and enable the one you need. 1 ) In the Server List section, click Add
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 99
    the configuration file provided by your VPN provider. Note: You can also check the box of Import the CA file or edit the . ovpn file manually, then upload the CA file or
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 100
    Chapter 14 VPN Server&Client • PPTP: Enter the VPN server address (for example: 218.18.1.73) and the VPN username and password provided by your VPN provider. • L2TP/IPSec VPN: Enter the VPN server address (for example: 218.18.1.73), VPN username and password, and IPSec pre-shared key provided by
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 101
    Chapter 14 VPN Server&Client • WireGuard VPN: Give a description, and click BROWSE to import the WireGuard VPN server configuration. Then you will see the detailed parameters. Do NOT change the parameters unless necessary. 97
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 102
    Chapter 14 VPN Server&Client 4 ) Save the settings. 5 ) In the server list, enable the one you need. 98
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 103
    Chapter 14 VPN Server&Client 5. Add and manage the devices that will use the VPN function. 1 ) In the Device List section, click Add. 2 ) Choose and add the devices that will access the VPN server you have configured. 6. Save the settings. 99
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 104
    Chapter 14 VPN Server&Client Done! Now the devices you specified can access the VPN server you enabled. 100
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 105
    Chapter 15 Customize Your Network Settings This chapter guides you on how to configure advanced network features. It contains the following sections: • Change the Internet Settings • Change the LAN Settings • Configure to Support IPTV Service • Specify DHCP Server Settings • Set Up a Dynamic DNS
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 106
    Chapter 15 Customize Your Network Settings 15. 1. Change the Internet Settings After setting up your internet, you can also easily change the internet settings if needed in the future. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 107
    Chapter 15 Customize Your Network Settings 1. Select the internet connection type and configure the settings according to the information provided by your ISP. 2. Optional. Reveal the advanced settings and change the settings if needed. It's recommended to keep the default settings. 3. Click SAVE.
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 108
    , and the new LAN IP address is not in the same subnet with the old one, then you should reconfigure these features. 15. 3. Configure to Support IPTV Service I want to: Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP). How can I do that? 104
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 109
    to any of the router's Ethernet port. If IGMP is not the technology your ISP applies to provide IPTV service: 1 ) Tick Enable IPTV/VLAN. 2 ) Select the appropriate Mode according to your ISP. • Select Bridge the LAN type to determine which port is used to support IPTV service. 4 ) Click SAVE. 105
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 110
    Chapter 15 Customize Your Network Settings 5 ) Connect the set-top box to the corresponding LAN port which is predetermined or you have specified in Step 3. Done! Your IPTV setup is done now! You may need to configure your set-top box before enjoying your TV. 15. 4. Specify DHCP Server Settings
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 111
    the MAC Address will be automatically filled in. Or enter the MAC address of the client device manually. 3. Enter the IP address to reserve for the client device. 4. Click SAVE. 15. 5. Set Up a Dynamic DNS Service Account Most ISPs assign a dynamic IP address to the router and you can use this IP
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 112
    account. 15. 6. Create Static Routes Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. 108
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 113
    Chapter 15 Customize Your Network Settings I want to: Visit multiple networks and servers at the same time. For example, in a small office, my PC can surf the internet through Router A, but I also want to visit my company's network. Now I have a switch and Router B. I connect the devices as shown
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 114
    Chapter 15 Customize Your Network Settings route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of Router A. In the example, the IP address of the company network is the destination IP address, so here enter 172.30.30.1. Subnet Mask: Determines the destination network with
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 115
    Chapter 16 Manage the Router This chapter will show you the configuration for managing and maintaining your router. It contains the following sections: • Update the Firmware • Backup and Restore Configuration Settings • Change the Login Password • Password Recovery • Local Management • Remote
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 116
    router. Also, the latest firmware will be released at the TP-Link official website www.tp-link.com, and you can download it from the Support page for free. Note: • Back up your router's configurations before firmware update. • Do NOT turn off the router during the firmware update. 16. 1. 1. Auto
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 117
    Chapter 16 Manage the Router 3. Focus on the Online Update section, and click UPDATE if there is new firmware. 4. Wait a few minutes for the update and reboot to complete. Tips: If there's a new and important firmware update for your router, you will see the prompt notification on your computer
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 118
    for the update and reboot to complete. Note: If you fail to update the firmware for the router, please contact our Technical Support. 16. 2. Backup and Restore Configuration Settings The configuration settings are stored as a configuration file in the router. You can backup the configuration
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 119
    Chapter 16 Manage the Router 2. Wait a few minutes for the resetting and rebooting. Note: • During the resetting process, do not turn off the router. • After reset, you can still use the current login password or the TP-Link ID to log in to the web management page. • To reset the router to factory
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 120
    username and password. 5. Click SAVE. To recover the login password, please visit http://tplinkwifi.net, click Forgot Password? on the login page and follow the instructions to set a new password. 116
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 121
    Chapter 16 Manage the Router 16. 5. Local Management This feature allows you to limit the number of client devices on your LAN from accessing the router by using the MAC address-based authentication. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 122
    CONNECTED DEVICES and select the device to manage the router from the Connected Devices list, or enter the MAC address of the device manually. 4. Specify a Description for this entry. 5. Click SAVE. 16. 6. Remote Management This feature allows you to control remote devices' authority to manage the
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 123
    WAN IP address of the router on Network Map > Internet. • The router's WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. • Allow a specific device to manage the router remotely: 119
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 124
    Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. 16. 7. System Log When the router does not work normally, you can save the system log and send it to the technical support for troubleshooting. • To save the system log locally: 1. Visit
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 125
    Chapter 16 Manage the Router 4. In the Save Log section, click SAVE TO LOCAL to save the system logs to a local disk. • To send the system log to a mailbox at a fixed time: For example, I want to check my router's working status at a fixed time every day, however, it's too troublesome to log in to
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 126
    Chapter 16 Manage the Router 1 ) Email From: Enter the email address used for sending the system log. 2 ) Select Require Password. Tips: Generally, Require Password should be selected if the login of the mailbox requires username and password. 3 ) Username: Enter the email address used for sending
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 127
    Chapter 16 Manage the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Diagnostics. 3. Enter the information: 1 ) Choose Ping or Traceroute as the diagnostic tool to test the connectivity; • Ping is used to
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 128
    Chapter 16 Manage the Router The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through Traceroute. 16. 9. Set System Time and Language System time is the time displayed while the router is running. The system time you configure here
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 129
    Time field, select Get from Managing Device. 2. The time of your computer will then be displayed and click SAVE. • To manually set the date and time: 1. In the Set Time field, select Manually. 2. Set the current Date (In MM/DD/YYYY format). 3. Set the current Time (In HH/MM/SS format). 4. Click
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 130
    Chapter 16 Manage the Router 2. Select the correct Start date and time when daylight saving time starts at your local time zone. 3. Select the correct End date and time when daylight saving time ends at your local time zone. 4. Click SAVE. • To set system language: Select the language from the
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 131
    Chapter 16 Manage the Router 4. Specify the Reboot Time when the router reboots and Repeat to decide how often it reboots. 5. Click SAVE. 16. 11. Control the LED The LED of the router indicates its activities and status. You can enable the Night Mode feature to specify a time period during which
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 132
    Chapter 16 Manage the Router 16. 12. Volume Control You can disable the speaker or adjust the volume of the device's speaker, and you can also enable Do Not Disturb mode to schedule when the speaker is off. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 133
    to log in, or you have enabled the Password Recovery feature of the router, click Forgot password on the login page and then follow the instructions to reset it. • Alternatively, press and hold the Reset button of the router for about 6 seconds until the Power LED blinks to restore factory default
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 134
    4 ) Click LAN settings and deselect the following three options and click OK. 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 130
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 135
    settings and try again. If login still fails, please contact the technical support. Note: You'll need to reconfigure the router to surf the internet try again: • Your computer might not recognize any DNS server addresses. Please manually configure the DNS server. 1 ) Go to Advanced > Network > DHCP
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 136
    • Restart the modem and the router. 1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it gets a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. •
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 137
    existing ADSL modem/router. If so, the router is not able to communicate with your modem and you can't access the internet. To resolve this problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168.2.1. 1 ) Visit http://tplinkwifi.net, and log
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 138
    . • Please upgrade the firmware of the router. If you've tried every method above but still cannot access the internet, please contact the technical support. Q5. What should I do if I can't find my wireless network or I cannot connect the wireless network? If you fail to find any wireless network
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 139
    function is disabled or blocked somehow. 2 ) Click Troubleshoot and windows might be able to fix the problem by itself. • On Windows XP 1 ) ) Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK. If you can find other wireless network
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 140
    2 ) If you cannot find the PIN or PIN failed, you may choose Connecting using a security key instead, and then type in the Wireless Password/Network Security Key. 3 ) If it continues to show note of Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 141
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 142
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 143
    • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 144
    /125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/ RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 145
    and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca National Restrictions Attention: This device may only be used indoors in Great Britain. UK 141
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 146
    Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 147
    5,925-7,125 GHz est interdite pour le contrôle ou les communications avec des systèmes d'avions sans pilote. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 148
    • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended • Do
  • TP-Link Archer BE800 | Archer BE800US V1.6 User Guide - Page 149
    Explanation DC voltage AC voltage Class II equipment Polarity of output terminals Energy efficiency Marking Indoor use only Caution Operator's manual RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
© 2023 TP-Link
1910013397
REV1.0.0
User Guide
BE19000 Tri-Band Wi-Fi 7 Router
Archer BE800