TP-Link Archer BE800 Archer BE800US V1.6 Quick Installation Guide

TP-Link Archer BE800 Manual

Get TP-Link Archer BE800 PDF manuals and user guides View all TP-Link Archer BE800 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link Archer BE800 manual content summary:

  • 1
  • 2
2
Internet
Fiber-Optic Cable
Optical Module
Connect via fiber
a. Connect to your optical
module (sold separately).
b. Connect to the router’s
SFP+ Port 2
.
c.
Turn on your modem, and wait
about
2 minutes
for it to restart.
Internet
Ethernet Cable
b.
Connect to the router’s
WAN Port 1 (recommended)
or WAN Port 3.
a.
Turn off
your modem, and
remove the backup battery if any.
Note:
If your internet comes from an Ethernet outlet
instead of a modem, simply connect the router’s 10 Gbps
RJ45 port to it.
Connect via Ethernet
Keep the router vertical
2
1
Combo
3
10 Gbps WAN/LAN
1
OR
10 Gbps SFP+
LED Screen
Commonly used functions and information can be visually displayed: weather,
graphics, time, and more.
Pulsing LEDs. The router is starting up or being reset.
Cycling graphics. The router is ready for setup.
Establishing a WPS connection. If successful, a
√
will appear, if failed, an
×
will appear
The router is being upgraded.
LEDs in the top are pulsing in a line, indicating Wi-Fi is off.
The router is disconnected from the internet.
Display the information set in Tether, and cycle through the emoji by default.
The router works fine and can access the internet.
Button Explanation
Set Up the Network
1. Connect your device to the router wirelessly or with an Ethernet cable.
New Password:
Let’s Get Started
Confirm Password:
http://tplinkwifi.net
Method TWO: Via a Web Browser
2. Launch a web browser and enter http://tplinkwifi.net or http://192.168.0.1
in the
address bar. Create a password to log in.
3. Follow the step-by-step instructions to set up the internet connection and
register for the TP-Link Cloud service.
Note: If the login window does not appear, please refer to
Q2
of
Need Help
in this guide.
Method ONE: Via the TP-Link Tether App
1. Download the Tether app.
To enjoy a more complete service from TP-Link, bind your TP-Link ID to
the router.
Scan for Tether
Tether
or
2. Open the Tether app and log in with your TP-Link ID.
3. Tap the
button in the Tether app and select Wireless Router > Archer BE800.
Follow the steps to complete the setup and connect to the internet.
Note: If you don’t have an account, create one first.
The default wireless network names (SSIDs) and password are printed on the
label at the back of the router.
Model: Archer AX3000
AX3000 Gigabit Wi-Fi Router
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
SSID:TP-Link_XXXX_6G
2
Choose Your Device Type
Gaming Router
Range Extender
Wireless Router
*Images may differ from your actual products.
•
Keep the router vertical while working. Refer to
Q5
of
Need Help
to place the router for optimal Wi-Fi performance.
•
The combo port pairs a RJ45 port with an SFP+ port.
Only one port
in the pair can be used at a time.
Wait until the LED screen cycles through graphics before
moving on.
3
Connect the router’s
10 Gbps Combo
port to the internet
via Ethernet or fiber network.
1
Connect the power adapter to the router and press the
Power
button to turn it on.
2
Note:
If you want to change the WAN port for internet service, refer to
Q1
of
Need Help
in this guide.
Three physical buttons are located on the front of the router.
Press the WPS button, and immediately press the WPS button on your
client device to start the WPS process. A
√
will appear on the LED screen,
indicating a successful WPS connection.
Press the LED button to turn on or off the LED of your router.
Press and hold this button for about 2 seconds to turn on or off the wireless
function of your router.
LED Button
Wi-Fi Button
WPS
Button
1
Connect the Hardware