TP-Link Archer D5 Archer D5 V1 User Guide

TP-Link Archer D5 Manual

Get TP-Link Archer D5 PDF manuals and user guides View all TP-Link Archer D5 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link Archer D5 manual content summary:

  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 1
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router Rev: 1.0.0 1910011021
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 2
    COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 3
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 4
    required Luxembourg None General authorization required for network and service supply(not for spectrum) Norway Implemented Russian Federation None antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 5
    Industry Canada Statement Complies with the Canadian ICES-003 Class B specifications. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 6
    power source.  Don't disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us.  Avoid water and wet locations. This product can be used in the following countries: AT BG BY CA CZ DE DK EE
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 7
    Product Description: AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router Model No.: Archer D5 Trademark: TP-LINK We declare under conformity with the following standards or other normative documents EN 300 328 V1.8.1: 2012 EN 301 489-1 V1.9.2:2011& EN 301 489-17 V2.2.1:2012 EN 55022:2010 EN 55024
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 8
    2.3 Connecting the Modem Router 7 Chapter 3. Quick Installation Guide 9 3.1 TCP/IP Configuration...9 3.2 Quick Installation Guide 10 Chapter 4. Configuring the Modem Router 16 4.1 Login ...16 4.2 Status...17 4.3 Quick Setup ...19 4.4 Operation Mode ...19 4.5 Network...19 4.5.1 WAN Settings...20
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 9
    Settings 5GHz...66 4.10.3 Guest Status 2.4GHz...68 4.10.4 Guest Status 5GHz...68 4.11 USB Settings ...69 4.11.1 USB Mass Storage ...69 4.11.2 User Accounts ...70 4.11.3 Storage Sharing...70 4.11.4 FTP Server ...72 4.11.5 Media Server ...74 4.11.6 Print Server...75 4.12 Route Settings ...75 4.12
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 10
    IPv6 Default Gateway...77 4.13.2 IPv6 Static Route ...78 4.14 Forwarding...79 4.14.1 Virtual Servers ...79 4.14.2 Port Triggering ...81 4.14.3 DMZ ...83 4.14.4 UPnP ...83 4. & Restore...107 4.23.7 Factory Defaults...107 4.23.8 Firmware Upgrade...108 4.23.9 Reboot ...109 4.23.10 Statistics...109
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 11
    4.24 Logout...111 Appendix A: Specifications 112 Appendix B: Troubleshooting 113 Appendix C: Technical Support 116
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 12
     One RJ45 cable  Two RJ11 cables  One ADSL splitter  One Resource CD for Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router, including:  This User Guide  Other Helpful Information  Note: Make sure that the package contains the above items. If any of the listed items are damaged
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 13
    Gigabit ADSL2+ Modem Router User Guide Chapter 1. Product Overview Thank you for choosing the Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router. 1.1 Overview of the Modem Router The Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router integrates 4-port Switch, Firewall, NAT
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 14
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 1.2 Main Features  Complies with IEEE 802.11ac to provide a wireless data rate of up to 300Mbps (2.4GHz) + 867Mbps (5GHz).  Four 10/100/1000Mbps Auto-Negotiation RJ45 LAN ports (Auto MDI/MDIX), one RJ11 port.  Provides
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 15
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 1.3 Panel Layout 1.3.1 The Front Panel Figure 1-1 The modem storage device or printer has connected to the USB port. (USB) Flash Off The USB port is sending or receiving data. No storage device or printer is plugged into the
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 16
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide (LAN) (Wireless) (Internet) (ADSL) (Power) On Off On Off On Off On Flash Off On Off There is a device connected to this LAN port, or the LAN port is sending or receiving data. There is no device connected to this LAN port.
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 17
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 1.3.2 The Back Panel Figure 1-2  ADSL: Through the port, these ports, you can connect the modem router to your PC or other Ethernet network devices. In wireless router mode you will be able to connect to Cable/FTTH/VDSL/ADSL
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 18
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Chapter 2. Connecting the Modem Router 2.1 System Requirements  Broadband Internet Access Service (DSL/Cable/Ethernet).  PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors.  TCP/IP protocol on
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 19
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 2-1 8
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 20
    Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 21
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should be lit. 2) Is the TCP/IP configuration for your PC correct? If the modem
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 22
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Note: 1) Do not mix up the user name and password with your ADSL account user as shown in Figure 3-3. Click Quick Setup menu to access Quick Setup Wizard. Figure 3-3 3. The Quick Setup page will appear for you to quickly
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 23
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 5. Select Yes and wait for 1-2 minutes to detect the connection type. Figure 3-6  Note: If the connection type can not be detected, please select No... and click Next to configure it manually (shown in Figure 3-7). Figure
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 24
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Note: If you are using the modem router username and password if you have created a new one. B. Configuration for Dynamic IP or Bridge This type doesn't need to be configured. C. Configuration for Static IP or IPoA Enter the
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 25
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 3-11 8. On this page, please confirm all parameters. Click Back to modify or click the Save button to save your configuration. Figure 3-12 9. You
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 26
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 3-13 The basic settings for your modem router are completed. Please open the web browser and try to log on to http://www.tp-link.com to test your Internet connection. 15
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 27
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Chapter 4. Configuring the Modem Router This chapter will show the right, there are the corresponding explanations and instructions. The detailed explanations for each Web page's key function are listed below. 16
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 28
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.2 Status Choose "Status", you can see the corresponding information about Device Information, DSL, WAN, LAN and Wireless. 17
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 29
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-1 18
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 30
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.3 Quick Setup Please refer to 3.2 Quick Installation Guide. 4.4 Operation Mode Choose "Operation Mode", and you will see the screen as shown in Figure 4-2. Select your desired mode and then click Save. Figure 4-2  DSL
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 31
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.5.1 WAN Settings Choose "Network""WAN Settings", and you will see the WAN Port Information Table in the screen similar to Figure 4-3. There are six different configurations for the connection types, which are Static IP,
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 32
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-4 4.5.1.1 Static IP Select this option if your ISP provides static IP information to you. You should set static IP address, IP subnet mask, and gateway address in the screen below. 21
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 33
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-5 ATM Configuration Mode: Select the encapsulation mode for the Static IP Address. Here you can leave it by default.  ATM Qos Type: Select ATM Qos Type provided by your ISP. The default type is UBR. WAN Service Setup
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 34
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Gateway (Optional): Enter the gateway IP address in dotted-decimal notation provided by your ISP.  DNS Server/ Secondary DNS Server: Here you can set DNS Server (at least one) manually of WAN Service Setup can be
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 35
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-6 Click Advance, advanced selections for WAN Service Setup can be shown.  MTU (bytes):. The default MTU (Maximum Transmission Unit) value is 1500 Bytes. Do not change the default value unless required by your
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 36
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Get IP with Unicast: It is disabled by default. A few ISPs' DHCP Servers do not support the broadcast applications. When the modem router cannot get the IP address normally, you can choose this option. (It is rarely
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 37
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-7  PPP Username/Password/Confirm Password: Enter the User Name, Password Manually: You can manually control the status of a connection. This mode also supports the Max Idle Time function as Connect on Demand mode.
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 38
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide selections for WAN Service Setup can be shown.  Service Name/Server Name: Enter the Service Name and Server Name  Set DNS Server manually: Choose "Set DNS Server manually", you can set DNS Server manually here. The modem
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 39
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-8 4.5.1.5 IPoA If your ISP provides an IPoA connection, select IPoA option for the Connection Type on the screen. 28
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 40
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-9  IP Address/Subnet Mask: default gateway. 4.5.1.6 Bridge If you select this type of connection, the modem router can be configured to act as a bridging device between your LAN and your ISP. Bridges are devices that
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 41
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Note: After you finish the Internet configuration, box to enable the Virtual LAN Ports feature.  Note: It is not allowed to disable the VLAN with Ethernet Connection enabled. To support this feature, you must create mapping
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 42
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-12 Click Save to make the entry effective immediately 4.5.3 LAN Settings Choose "Network""LAN Settings" menu, and you will see the LAN screen (shown in Figure 4-13). Please configure the parameters for LAN ports
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 43
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Enable IGMP Snooping: IGMP Snooping is server is enabled by default. DHCP service will supply IP settings to computers connected to the modem router though the Ethernet port which are configured to automatically obtain IP
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 44
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 2) If DHCPv6 Server is selected, please address assigned by the modem router. After the dynamic IPv6 address has expired, the user will be automatically assigned a new dynamic IPv6 address. The default is 86400 seconds
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 45
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.5.5 MAC Clone Choose menu "Network""MAC Clone clone your current PC MAC, and then click Save. Figure 4-18  Note: Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not be the same with
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 46
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide the gateway to support address and port translation for certain settings. 4.5.7 DSL Settings Choose "Advanced Setup""DSL Settings", you can select the problem. Please check the proper settings with your Internet service
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 47
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-21 This section will guide you to configure a VPN tunnel between two Archer D5s. The topology is as follows. Archer D5 Archer D5  Note: You could also use other VPN Routers to set VPN tunnels with Archer D5.
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 48
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Device2)  Key Exchange Method: Select Auto (IKE) or Manual.  Authentication Method: Select Pre-Shared Key (recommended).  . (For example: Input 12345678)  Perfect Forward Secrecy: PFS is an additional security protocol.
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 49
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Click Show Advanced Settings and then you can configure the Advanced Settings. We recommend you leave the Advanced Settings as default value. Figure 4-23  Mode: Select Main Mode to configure the standard negotiation
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 50
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-24  Enable IPTV: Check the box to enable IPTV function.  VPI (0~255): Identifies the virtual path between endpoints in an ATM network. The valid
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 51
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-25  Group/ IP Address/ Subnet local PCs will forward to the DHCP server runs on WAN side. To have this function working properly, please run on router mode only, disable the DHCP server on the LAN port, and make
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 52
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Note: 1) To use the DHCP server function IP address has expired, a new dynamic IP address will be automatically assigned to the user. Click the Refresh button to update this page. 4.7.3 Address Reservation Choose menu "DHCP
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 53
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-27  MAC Address: The MAC address of the PC for which you want to reserve an IP address.  IP Address: The IP address reserved
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 54
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-29 To add a vendor class: 1. Click the Add New button. Then Figure 4-30 will pop up. 2. Enter parameters for the vendor class. Click the
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 55
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide case-sensitive and must not exceed 32 characters. The default SSID is TP-LINK_2.4GHz_XXXXXX (xx is the last six numbers of MAC address). selection option.  Mode: Select the desired mode. 11b only: Select if all of your
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 56
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide unless you notice interference problems with another nearby or 11bg mixed is selected in the Mode field, the Channel Width selecting field will With this function, the modem router can bridge two or more Wlans. If this
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 57
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Authentication Type: This option should be new device to the existing network manually by clicking this button. b). To add a new device: If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 58
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide You can also keep the default WPS or its documentation for further instructions. II. Enter the client device's PIN on the modem router Use this method if your client device has a Wi-Fi Protected Setup PIN number. Step 1: Keep
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 59
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Step 3: Step 4: Setup process. When the WPS LED is on, the client device has successfully connected to the modem router. Refer back to your client device or its documentation for further instructions modes supported by
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 60
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Encryption: You can select Auto, TKIP or IP: Enter the IP address of the Radius Server.  RADIUS Server Port: Enter the port that radius service used.  RADIUS Server Password: Enter the password for the Radius Server.
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 61
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Key Type: You can select the WEP key length (64-bit, or 128-bit.) for encryption. "Disabled" means this WEP key entry is invalid. 64-
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 62
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.8.5 Wireless MAC Filtering Choose menu " Figure 4-38: Figure 4-38 To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 63
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide To edit or delete an existing entry: 1. Click in the Description field. 3) Select Enabled in the Status drop-down list. 4) Select TP-LINK_2.4GHz for the Host. 5) Click the Save button. The filtering rules that configured
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 64
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-39  Transmit Power: Here you can specify the transmit power of the modem router. You can select 100%, 50% or 25%. 100% is the
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 65
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.8.7 Wireless Status Choose menu "Wireless 2.4GHz""Wireless Status", you can see the MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 66
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-41  SSID: Wireless network name. Enter a desired SSID which is case-sensitive and must not exceed 32 characters. The default SSID is TP you set the Mode 11a/n/ac mixed. problems the modem router can bridge two or more
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 67
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  SSID (to be bridged): The SSID of the AP your modem router is going to connect to as a client. You can also use the search function to select the SSID to join.  BSSID (to be bridged network manually by clicking this 56
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 68
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide button. b). To add a new device: If the wireless adapter supports Wi-Fi Protected Setup instructions. II. Enter the client device's PIN on the modem router Use this method if your client device has a Wi-Fi Protected Setup
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 69
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-44 Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Connect button. Step 3: "Connect
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 70
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-45  Disable Wireless Security: If you do not want to use wireless security, check this radio button. But it's strongly recommended to choose one of the below modes to ensure security.  WPA/WPA2-Personal - It's the
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 71
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Authentication Type: Authentication Type: IP: Enter the IP address of the Radius Server.  RADIUS Server Port: Enter the port that radius service used.  RADIUS Server Password: Enter the password for the Radius Server.
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 72
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Be sure to click the Save button to save your settings on this page. 4.9.4 Wireless Schedule Choose menu "Wireless 5GHz""Wireless Schedule", you can configure
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 73
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-47 To filter wireless users by MAC Address, 38: Figure 4-48 To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 74
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 3. Click the Save button. Click the A/B in the Description field. 3) Select Enabled in the Status drop-down list. 4) Select TP-LINK_5GHz for the Host. 5) Click the Save button. The filtering rules that configured should be
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 75
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-49  Transmit Power: Here you can specify the transmit power of the modem router. You can select 100%, 50% or 25%. 100% is the
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 76
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-50  MAC Address: The connected wireless station's MAC address  Current Status: The connected wireless station's running status, one of STA-AUTH/ STA-ASSOC/ STA-
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 77
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-51  Guest Network: When enable this a name that easily distinguishes it from your primary network. The default name is TP-LINK Guest_2.4GHz.  Security: It's strongly recommended to enable WPA/WPA2-Personal.
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 78
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-52  Guest Network: When enable this a name that easily distinguishes it from your primary network. The default name is TP-LINK Guest_5GHz.  Security: It's strongly recommended to enable WPA/WPA2-Personal. WPA/WPA2
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 79
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.10.3 Guest Status 2.4GHz Choose menu "Guest Network""Guest Status 2.4GHz", you can see the MAC Address, Current Status, Received Packets and Sent Packets for
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 80
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.11 USB Settings There are six submenus under the USB Settings menu, USB Mass Storage, User below. Figure 4-55  Volume: The volume name of the USB drive the users have access to.  File System: The system of the USB drive. 
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 81
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide when volume is non-shared, you can click the Activate button to share the volume. Click Disconnect to safely remove the USB storage device that is connected to USB port.  Note: Before removing the USB storage device, you
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 82
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-57  Server Status: Indicates the Storage Sharing's current status.  Anonymous access to all the volumes: This function is enabled by default, so that users follow the instructions below. 1. Click Add New Folder. 71
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 83
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-58 2. Click the Browse button, and then select the Select Volume from the drop-down list. 3. Enter the display name of the share folder
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 84
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-59  Server Status: Indicates the FTP Server's current status.  Internet Access: If Internet Access is enabled, user(s) in public network can access FTP server via Internet Address.  Internet Address: If Internet
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 85
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-60 2. Click the Browse button, and then select a new share folder for your media server, please follow the instructions below: a) Click Add New Folder button, and you will see the screen as shown in Figure 4-62. 74
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 86
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide b) Enter the name of the share folder turned on, and no user is using the print services at present. You can click the Stop button to stop the print service.  Offline: Indicates the print service feature is disabled. You
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 87
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.12.1 Default Gateway Choose "Route Settings""Default Gateway", you can see the Default Gateway screen. You can select a WAN Interface from the drop-down list
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 88
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide static route.  Subnet Mask: It determines which portion of an IP Address is the network portion, and which portion is the host portion.  Gateway: Type
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 89
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-68 Click the Add Interface button, travel to reach a specific host or network. Figure 4-69 To add a new entry, follow the instructions below. 1. Click the Add New button in Figure 4-69, and you will see the screen as
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 90
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Prefix Length: The prefix length of the destination IPv6 address.  Gateway: Type in the correct IPv6 Gateway address for the IPv6 Static Route.  Interface: Select
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 91
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  IP Address: The IP address of the PC running the service application.  Protocol: The protocol used for this application. The options are TCP, UDP, or All (all protocols supported by the modem router).  Status: The status
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 92
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide System Tools -> Manage Control page to be any other value except 80 such as 8080. Otherwise there will be a conflict to disable the virtual server. 4.14.2 Port Triggering Choose menu "Forwarding"→ "Port Triggering", you can
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 93
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-74  Interface: Display the default gateway you have set in 4.5.1 WAN Settings.  Trigger Port: The port for outgoing traffic. An outgoing connection using this port will trigger this rule.  Trigger Protocol: The
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 94
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Note: 1. When the trigger connection is released, the corresponding opened ports will be closed. 2. Each rule can only be used by one host on the LAN at a time. The trigger connection of other hosts on the
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 95
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Current UPnP Status: UPnP can be request.  Status: Either Enabled or Disabled. "Enabled" means that the port is still active; otherwise, the port is inactive. Click the Enable button to enable UPnP. Click the Disable
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 96
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-77  Enable Parental Control: Check the box if you want this function to take effect. This function is disabled by default.  MAC Address of
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 97
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.16 Firewall There are four submenus under the Firewall menu: Rule, LAN Host, WAN Host and Schedule. Click any of them, and you will be
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 98
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide The methods to add a new rule: 1. Click the Add New button and the next screen will pop up as shown in Figure 4-79. 2. Give a name (e.g.
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 99
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Edit: To modify an existing entry. To add a new entry, please follow the steps below. 1. Click the Add New button. 2. In the Mode .  Details: The details can be IP address, port, or domain name.  Edit: To modify an
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 100
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 1) In Description field, create a unique description for the host (e.g. Host_1). 2) In IP Address field, enter the IP address. If you select MAC Address, the screen
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 101
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-85  Description: Here displays the description of the schedule and this description is unique.  Edit: Here you can modify an existing schedule. To add a
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 102
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.17 IPv6 Firewall There are four submenus under the IPv6 Firewall menu: IPv6 Rule, IPv6 LAN Host, IPv6 WAN Host and IPv6 Schedule. Click any
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 103
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-88 2. Give a name (e.g. Rule_1) for the rule in the Description field. 3. Select a host from the IPv6 LAN Host drop-down list or choose "Add
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 104
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide  Edit: To modify an existing entry. To WAN and this description is unique.  Details: The details can be IPv6 address, prefix length or port.  Edit: To modify an existing entry. To add a new entry, please follow the steps
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 105
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-92 2. Create a unique description for the host (e.g. Host_1) in the Description field. 3. Enter an IPv6 address in the IPv6 Address field. 4. Enter the prefix
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 106
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure mechanism to enable IPv6-only hosts to reach IPv4 services and to allow isolated IPv6 hosts and networks to It is a temporary solution for networks that do not support native dual-stack, where both IPv6 and IPv4 run
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 107
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-95  Enable: Check the box to enable IPv6 Tunnel function. It is disabled by default.  Mechanism: Select a type for IPv6 tunnel from the drop-down list. DS-Lite, 6RD and 6to4 are supported. 1) DS-Lite This type is
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 108
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-97  WAN Connection: Select a WAN for this tunnel. Auto means to obtain the following parameters automatically while Manual means you set them up manually. If Auto is selected, only Dynamic IP WAN connection can be
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 109
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.19 Bandwidth Control Choose menu " Total Upstream Bandwidth: The upload speed through the WAN port.  Total Downstream Bandwidth: The download speed through the WAN port.  Enable IPTV Bandwidth Guarantee: Check the box
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 110
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-100 3. Click the Save button. Click the Enable/ Disable Selected button to make selected entries enabled or disabled. Click the Delete Selected button to
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 111
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide When you want to add or modify an IP & MAC Binding entry, you can click the Add New button or Edit button, and then you
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 112
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Click the Delete Selected button DDNS service providers such as www.no-ip.com. The Dynamic DNS client service provider will give you a password or key. Figure 4-104  Service Provider: This field displays the service provider
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 113
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.23 System Tools Figure 4-105 Choose menu "System Tools", and you can see the submenus under the main menu: System Log, Time Settings, Manage Control,
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 114
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-106  Log Type: Select the log type : If Save Remotely is selected, events will be sent to the specified IP address and UDP port of the remote system log server. Click the Save button to save your settings. 4.23.2
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 115
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-108  Time Zone: Select daylight saving function.  Start/End: Select the correct Start time and End time. To set time manually: 1. Select your local time zone. 2. Enter the Date in Year/Month/Day format. 3. Enter
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 116
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-109  Current User Status: This box displays the information about User Type, User Name, Host IP Address and Host MAC Address.  Account Management: Here you can set the account user information about New User Name
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 117
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-110  CWMP: Select Enable to User Name and Password for the ACS server to log in the modem router.  Connection Request Path: Enter the path that connects to the ACS server.  Connection Request Port: Enter the port
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 118
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-111 An SNMP Agent is an file in your local computer. To upgrade the modem router's configuration, follow these instructions. 1. Click the Browse button to find the configuration file which you want to restore
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 119
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-113 Click the Restore button to reset all configuration settings to their default values.  The default User Name: admin  The default Password: admin  The default Subnet Mask: 255.255.255.0  Note: All changed
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 120
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide want to use. 2) When upgrade the modem router's firmware, you may lose its current configurations, so please write down some of your customized settings before upgrading the firmware Management Port.  Upgrade the firmware of
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 121
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Figure 4-116  Traffic Status: If it is disabled, the function of DoS protection in Security settings will be disabled.The default value is disabled. To
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 122
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Operation Reset Delete Reset the value of the entry to zero. Delete the existing entry in the table. 4.24 Logout Choose "Logout", and you will back to the login screen as shown in Figure 4-117. Figure 4-117 111
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 123
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Appendix A: Specifications General ANSI T1.413 ICMP, NAT Safety & Emission FCC, CE Ports Four 10/100/1000M Auto-Negotiation RJ45 ports（Auto MDI/MDIX) One RJ11 port Two USB 2.0 ports LEDs WPS, USB, Power (LAN), Wireless
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 124
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Appendix B: Troubleshooting T1. How do I . 2) Use the default user name and password: admin, admin. 3) Try to configure your modem router once again by following the instructions in 3.2 Quick Installation Guide. T3. What can
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 125
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4） Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. For Windows 8 1） Move your mouse to the lower right corner
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 126
    the instructions in 3.2 Quick Installation Guide. 5) Please contact our Technical Support if the problem still exists.  Note: For more details about Troubleshooting and Technical Support contact information, please log on to our Technical Support Website: http://www.tp-link.com/en/support 115
  • TP-Link Archer D5 | Archer D5 V1 User Guide - Page 127
    Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Appendix C: Technical Support Technical Support  For more troubleshooting help, go to: http://www.tp-link.com/en/support/faq  To download the latest Firmware, Driver, Utility and User Guide, go to: http://www.tp-link.com/
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
Archer D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem
Router
Rev: 1.0.0
1910011021