TP-Link Archer GX90 Archer GX90US V1 Quick Installation Guide

Method ONE: Via TP-Link Tether App

1. Download the Tether app.

Scan for Tether

Tether

or

Method TWO: Via a Web Browser

The default wireless network names (SSIDs) and password are

printed on the label at the bottom of the router.

1. Connect your device to the router wirelessly

or with an Ethernet cable.

2. Launch a web browser, and enter

http://tplinkwifi.net or http://192.168.0.1 in

the address bar. Create a password to log in.

3. Follow the step-by-step instructions to

set up the internet connection and

register for the TP-Link Cloud service.

Note: If the login window does not appear, please refer to

Q2

of

Need

Help?

in this guide.

http://tplinkwifi.net

Let’s Get Started

Confirm Password

Password

2. Open the Tether app and log in with your

TP-Link ID.

Note: If you don’t have an account, create one first.

3. Tap the

button in the Tether app and

select Gaming router > Archer GX90.

Follow the steps to complete the setup

and connect to the internet.

Choose your device type

Router

Range Extender

Archer AX6000

Set up with videos:

Scan QR code or visit

rt/setup-video/#wi-fi-routers

If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL /

Cable / Satellite modem, connect the Ethernet cable to the router’s

2.5 Gbps WAN/LAN

port, and then

follow steps 3 and 4 to complete the hardware connection.

*Image may differ from actual product.

Connect the Hardware

1

to turn off your modem, if any,

and remove the backup battery if it has one.

Modem

Unplug the power

Hold the antennas from the base and

push them fully into the slots.

Internet

Connect the

powered-off

modem

to the router’s

2.5 Gbps WAN/LAN

port with an Ethernet cable.

1

Power on the modem, and then wait about

2 minutes

for it to restart.

2

Connect the power adapter

to the router and turn it on.

3

SSID:TP-Link_XXXX

SSID:TP-Link_XXXX_5G

SSID:TP-Link_XXXX_5G_Gaming

Wireless Password/PIN: XXXXXXXX

Verify the

LED on the top is solid on (red or white) before moving on.

4

Note: If you want to use the 1 Gbps WAN/LAN port

as the WAN port instead, please refer to

Q1

of

Need

Help?

in this guide.

Configure the Router