TP-Link Archer VR200 Archer VR200 V1 User Guide

TP-Link Archer VR200 Manual

Get TP-Link Archer VR200 PDF manuals and user guides View all TP-Link Archer VR200 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link Archer VR200 manual content summary:

  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 1
    Archer VR200 User Guide AC750 Wireless Dual Band Gigabit VDSL2 Modem Router REV1.0.0 1910011417
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 2
    Contents About This Guide 3 Chapter 1. Get to Know About Your Modem Router 4 1. 1. Product 4. 1. Use Quick Setup Wizard 16 4. 2. Manually Set up an Internet Connection 16 4. 3. Set up Network Security 24 6. 1. MAC Filtering 25 6. 2. Access Control 26 6. 3. IP & MAC Binding 28 Chapter 7.
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 3
    Forwarding 53 11. 1. Share Local Resources in the Internet by Virtual Server 54 11. 2. Open Ports Dynamically by Port Triggering 55 11. 3. Make Applications Free from Port Advanced Wireless Settings 68 12. 3. Set Up a Dynamic DNS Service Account 70 12. 4. Interface Grouping 70 12. 5. Create Static
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 4
    13. Administrate Your Network 79 13. 1. Set System Time and Region 80 13. 2. Update the Firmware 81 13. 3. Back up and Restore Configuration Settings 82 13. 4. Change the Administrator CWMP Settings 87 13. 10. SNMP Settings 89 Appendix A: Specifications 91 Appendix B: Troubleshooting 92
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 5
    guide, a Quick Installation Guide is also released with each TP-LINK Guide before you get started with a further configuration. Conventions In this guide the following conventions are used: Convention Description modem router/ router Stands for AC750 to the various firmware versions. Please just
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 6
    Chapter 1 Get to Know About Your Modem Router This chapter introduces what the modem router can do and shows its main features and appearance. This chapter contains the following sections: • Product Overview • Main Features • Panel Layout
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 7
    Chapter 1 Get to Know About Your Modem Router 1. 1. Product Overview What This Product Does TP-LINK's Archer VR200 AC750 Wireless Dual Band Gigabit VDSL2 Modem Router is a combined wired/wireless network connection device with integrated wireless router and VDSL modem, reducing hassle of
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 8
    to expose private Wi-Fi access codes or other personal data. IPv6 Supported Archer VR200 supports IPv6, which is the foundation of the next generation of the Internet and enables a range of new services and improved user experience. 1. 2. Main Features • Supports 802.11ac - The next generation
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 9
    without affecting the modem router's function • Supports firmware upgrade and Web management • Supports Virtual Server, DMZ host and Port Triggering • Supports Dynamic DNS, UPnP and Static Routing • Supports system log and flow Statistics • Supports IPv6 1. 3. Panel Layout 1. 3. 1. Top View The
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 10
    initialization complete. System initializing or firmware upgrading is in process. Bridge mode. Please refer to Note 2 for troubleshooting. USB device is plugged into the USB port. A wireless device has been successfully your ISP to make sure your Internet service is available now. 2. If the Internet
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 11
    ports, buttons and antennas. Refer to the following for detailed instructions. Item Description For connecting the modem router to the Internet. Connect the port to the DSL splitter or directly connect the port ways to reset the modem router's factory defaults. Method one: With the modem router
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 12
    1 1. 3. 3. The Side Panel Get to Know About Your Modem Router The modem router's side panel shows the connection ports and buttons. Refer to the following for detailed instructions. Item Description USB 2.0 For connecting to a USB storage device or a USB printer. LED ON/OFF For turning on
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 13
    Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Modem Router • Connect Your Modem Router
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 14
    Connect the Hardware 2. 1. Position Your Modem Router With the modem router, you can access your network from anywhere within the wireless network coverage. However, the wireless signal strength and adapter. The electrical outlet shall be installed near the device and shall be easily accessible 10
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 15
    port to the LAN port on the modem router Archer VR200 via the Ethernet cable. Method 2: Wirelessly Use the default SSID (Wireless Network Name) and Wireless Password printed on the product label of the modem router to connect wirelessly. Method 3: Use the WPS button Wireless devices that support
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 16
    Chapter 2 Connect the Hardware 3 ) The WPS LED flashes for about two minutes during the WPS process. 4 ) When the WPS LED is on, the client device has successfully connected to the modem router. 12
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 17
    Chapter 3 Log into Your Modem Router
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 18
    easy to configure and manage the Archer VR200 AC750 Wireless Dual Band VDSL2 Modem Router Troubleshooting to configure your computer. 2. Launch a web browser and type in http://tplinkmodem.net or http://192.168.1.1. Set a strong password using 1-15 characters and click Save. 3. Enter the password
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 19
    steps have been successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provided IPv6 service. This chapter includes the following sections: • Use Quick Setup Wizard • Manually Set up an Internet Connection • Set up an IPv6 Connection • Test Internet Connectivity
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 20
    the Internet. Refer to Appendix B: Troubleshooting for details. 4. 2. Manually Set up an Internet Connection To manually add an Internet connection without following the instructions of the Quick Setup wizard: 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 21
    an IPv6 Connection If the DSL line your ISP provided also supports IPv6 connection and your ISP has provided some detailed IPv6 parameters, Configure the WAN settings. 1 ) Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2 ) Go to Advanced > Network > Internet
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 22
    SLAAC is the most commonly used addressing type. IPv6 Gateway: Keep the default setting as Current Connection. Note: If your ISP has provided the IPv6 Leave the rest of the settings as default. 3 ) Click Save to make the settings effective. 3. Done. IPv6 service is available for your network. 18
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 23
    4. 4. Test Internet Connectivity After manually set up the Internet connection, you need to know the Internet connectivity. The modem router provides a diagnostic tool to help you locate the malfunction. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 24
    Chapter 5 Bandwidth Control The Bandwidth Control feature is used to fully utilize your limit bandwidth and optimize the load respectively. With this feature enabled, you can assign a specific minimum or maximum bandwidth for each computer, thus minimizing the impact caused when the connection is
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 25
    address reservation, please refer to Reserve LAN IP Addresses. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Bandwidth Control page. 3. Enable Bandwidth Control. 4. EntertheTotalUpstreamBandwidthandtheTotalDownstream Bandwidth
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 26
    the IP address range, all computers in the range will share the given bandwidth. 2 ) Port Range: Keep the default settings. The default port range of TCP protocol or UDP protocol is from 1 to 65535. 3 ) Protocol: Keep the default setting. Or you can choose the TCP protocol or UDP protocol or both of
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 27
    Chapter 5 Bandwidth Control Done! Now you and your roommate have an independent bandwidth. 23
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 28
    6 Network Security This chapter guides you on how to protect your home network from unauthorized users by implementing these three network security functions. You can block or allow specific client devices to access your wireless network using MAC Filtering, or using Access Control for wired and
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 29
    wireless network with the following capabilities: • My computer is always allowed to access the wireless network. • The unknown device is not allowed to access the wireless network. • I don't have to keep changing my wireless password as often. 1. Visit http://tplinkmodem.net, and log in with the
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 30
    devices (Blacklist) or a list of allowed devices (Whitelist). I want to: How can I do that? Block or allow specific client devices to access my network (via wired or wireless). 1. Visit http://tplinkmodem.net, and log in with the password you set for the router. 2. Go to Advanced > Security
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 31
    Chapter 6 Network Security 3. Select the access mode to either block (recommended) or allow the device(s) in the list. To block specific device(s) 1 ) Select Blacklist and click Save. 2 ) Select the device(s) to be
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 32
    address. This will prevent ARP spoofing and other ARP attacks by denying network access to an device with matching IP address in the Binding list, but spoofing and ARP attacks. 1. Visit http://tplinkmodem.net, and log in with the password you set for the router. 2. Go to Advanced > Security > IP &
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 33
    Chapter 6 Network Security Done! 2 ) Enter the MAC address and IP address that you want to bind. 3 ) Select the checkbox to enable the entry and click OK. Now you don't need to worry about ARP spoofing and ARP attacks. 29
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 34
    Chapter 7 IPTV IPTV is the abbreviation of Internet Protocol Television. The service can only be delivered through the Internet, and our modem router provides a specific LAN port for IPTV. By automatically seperating IPTV from Internet surfing, we guarantee you a high quality of video streaming and
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 35
    , and log in with the password you set for the router. 2. Go to Advanced > IPTV to open the configuration page. Done! 3. Click Enable IPTV to enable this function. 4. Select DSL Modulation Type provided by your ISP (Inter Service Provider). 5. Specify a LAN port for IPTV connection and connect
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 36
    8 USB Application This chapter describes how to share and access USB devices connected to the modem router among different clients. The modem router only supports USB external flash drives, hard drives and USB printers, and does not support USB 3G/4G modems. This chapter contains the following
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 37
    Access the USB disk 1. Connect Your USB Disk Insert your USB storage device into the modem router's USB port Access Your USB Disk By default all the network clients can access all folders on your USB disk. Refer to the following table for access instructions access Content By default, Share All
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 38
    you will be required to use a username and password to access the USB disk. Refer to To Set up Authentication for Data Security to learn view photos, play music and watch movies stored on the USB disk directly from DLNA-supported devices. Click Media Sharing to learn more. 5. Click OK. Tips: The modem
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 39
    USB Settings > Folder Sharing. USB Application 3. Choose to use the default Account (admin) or use a new account and click Save. 4. the server name and use the name to access your USB disk. 1. Visit http://tplinkmodem.net, then log in with the password you set for the modem router. 2. Select
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 40
    you cannot use this feature because private addresses are not routed on the Internet. 8. 2. 1. Access the USB disk 1. Connect Your USB Disk Insert your USB storage device into the modem router's USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 41
    sharing account for data security. 1 ) Visit http://tplinkmodem.net, then log in with the password you set for the modem router. 2 ) Select Advanced > USB Settings > Folder Sharing. 3 ) Choose to use the default Account (admin) or use a new account and click Save. 4 ) Enable Authentication to apply
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 42
    access the USB disk: Computer • To download, open a web browser and type the server address ftp://:
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 43
    on the USB disk directly from DLNA-supported devices, such as your computer, pad and PS2/3. 8. 3. 1. Access the USB disk 1. Connect Your USB Disk Insert your USB storage device into the modem router's USB port directly or using a USB
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 44
    and click . 2. Access the Media Files on Your USB Disk Now the DLNA-supported devices (such as default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the steps below: 1. Visit http://tplinkmodem.net, then log in with the password
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 45
    modify the media server name or disable the feature of Media Sharing as needed. 1. Visit http://tplinkmodem.net, then log in with the password you set for the modem router. 2. Select Advanced > USB Settings > Folder Sharing. 3. Enter a Network/Media Server Name as you like, such as MyShare
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 46
    to the USB port with the USB cable. Wait several seconds until the USB LED becomes solid on. 3. Install the TP-LINK USB Printer Controller Utility TP-LINK USB Printer Controller Utility helps you access the shared printer. Download and Install the utility on each computer that needs printer service
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 47
    Chapter 8 USB Application Windows Mac 3 ) Click the Auto-Connect for printing tab to pull down a list, then select Set Auto- Connect Printer. Windows Mac 4 ) Select the printer you share, then click Apply. 43
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 48
    Chapter 8 USB Application Windows Mac 5 ) You will see the printer marked as Auto-Connect Printer. Now you can print with this printer. 44
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 49
    Server also allows different clients to share the scan feature of MFPs (Multi-Function Printers). To scan with TP-LINK USB Printer Controller, right-click the printer and select Network Scanner. Then, a scanning window will pop up. Finish the scanning process by following on-screen instructions. 45
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 50
    Chapter 9 Parental Controls This function allows you to block inappropriate, explicit and malicious websites, and control access to specified websites at specified time.
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 51
    , I want to allow my children's devices (e.g. a computer or a tablet) to access only www.tp-link.com and Wikipedia.org from 18:00 (6PM) to 22:00 (10PM) on weekdays and not other time. 1. Visit http://tplinkmodem.net, and log in with the password you set for the router. 2. Go to Basic or Advanced
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 52
    and click OK. 8. Select the restriction mode. 1 ) In Blacklist mode, the controlled devices cannot access any websites containing the specified keywords during the Internet Access Time period. 2 ) In Whitelist mode, the controlled devices can only access websites containing the specified keywords
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 53
    Done! Parental Controls 1 ) Enter a web address (e.g. www.tp-link.com) or a web address keyword (e.g. wikipedia) to only allow or block access to the websites containing that keyword. 2 ) Specify the domain suffix (eg. .edu or .org) to allow access only to the websites with that suffix. 3 ) If you
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 54
    Chapter 10 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 55
    unless you want your guests and other people to manually input this SSID for Wi-Fi access. 3 ) Set Security to WPA/WPA2 Personal, keep the default Version and Encryption values, and set an easy-to-remember password. 4. Click Save. Now your guests can access your guest network using the SSID and
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 56
    to allow the clients in your guest network to access each other. • Allow guests to access my local network Select this checkbox to allow the clients in your Select this checkbox to allow the clients in your guest network to access your router's USB storage sharing. • Enable guest network bandwidth
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 57
    about the problem that external host cannot initiatively communicate with the specified device in the local network. With forwarding feature the TP-LINK modem router includes four forwarding rules. If two or more rules are set, the priority of implementation from high to low is Virtual Servers, Port
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 58
    service uses different service port. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service port in with the password you set for the modem router. 3. Go to Advanced > NAT Forwarding > Virtual Servers, click Add. 54
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 59
    to keep the default settings of Internal Port and Protocol if you are not clear about which port and protocol to use. 2. If the service you want to use is not in the Service Type, you can enter the corresponding parameters manually. You should verify the port number that the service needs. 3. You
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 60
    port triggering rules: 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > NAT Forwarding > Port the parameters manually. You should verify the external ports the application uses first and enter them into External Port field according
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 61
    players. To solve this problem, set your PC as a DMZ with all ports opened. 1. Assign a static IP address to your PC, for example 192.168.0.100. 2. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 3. Go to Advanced > NAT Forwarding > DMZ and select the
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 62
    Forwarding to use applications for multiplayer gaming, peer-to-peer connections, real-time communication (such as VoIP or telephone conference) or remote assistance, etc. Tips: 1. UPnP is enabled by default in this modem router. 2. Only the application supporting the corresponding ports allowing the
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 63
    introduces how to change the default settings or adjust the basic configuration of the modem router using the web-based management page. This chapter contains the following sections: • LAN Settings • Wireless Settings • Set Up a Dynamic DNS Service Account • Interface Grouping • Create Static
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 64
    change your IP address. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Network > LAN group they have not explicitly joined. 6. Leave the rest of the default settings as they are. 7. Click Save to make the settings effective.
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 65
    log in with the password you set for the default and click Save to make your settings effective. Note: 1. The modem router can be configured to work as a DHCP Relay. A DHCP relay is a computer that forwards the same IP address each time when it accesses the DHCP server. If there are some devices
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 66
    Your Network Settings Follow the steps below to reserve an IP address for your device. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Network > LAN Settings page and select IPv4. 3. Scroll down to locate the Address Reservation
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 67
    ) and wireless password: Enter a new SSID using up to 32 characters. The default SSID is TP-LINK_XXXX and the manually join the network. ¾¾ To change the mode or channel: Go to Advanced > Wireless >Wireless Settings page and select the wireless network 2.4GHz or 5GHz. Mode: Select the desired mode
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 68
    be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. Channel Width: Select the channel width from the drop-down list. The default setting is Automatic, which can adjust the channel width for your clients automatically
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 69
    wireless network 2.4GHz or 5GHz according to your wireless client. 3. Keep the default WPS status as Enabled and select the PIN Number radio button. 4. Enter router's PIN. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Wireless >
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 70
    new PIN. 4. On the client device, enter the modem router's PIN. (The default PIN is also labeled on the bottom of the modem router.) 5. The WPS the wireless connection. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Wireless >
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 71
    period you set. 12. 2. 4. View Wireless Information ¾¾ To view the detailed wireless network settings: 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Status page. You can see the Wireless box. 3. Select 2.4GHz or 5GHz to view the
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 72
    settings on this page, it's strongly recommended that you keep the provided default values; otherwise it may result in lower wireless network performance. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Wireless > Advanced Settings
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 73
    AP isolation is disabled by default. • WDS: Select this checkbox to enable the WDS (Wireless Distribution System) Bridging feature to allow the router to bridge with another access point (AP) in a wireless local area network (WLAN). Refer to Appendix B: Troubleshooting for detailed instructions. 69
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 74
    feature on the router to allow you and your friends to access your router and local servers (FTP, HTTP, etc.) using instructions below: 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Network> Dynamic DNS. 3. Select the DDNS service
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 75
    Chapter 12 How can I do that? Specify Your Network Settings 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Network > Interface Grouping to open the configuration page where some interfaces can be grouped together. 3. Click
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 76
    isolated group! Note: VLAN function is enabled by default. You cannot disable it when IPTV is enabled. specific host or network. Data from one point to another will always follow the same Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 3. Go to Advanced
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 77
    on the same subnet with the router's IP which sends out the data. In the example, the data packets will be sent to the LAN port of 73
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 78
    default gateway should be 192.168.0.2. • Interface: Determined by the port (WAN/LAN) that sends out the data packets. In the example, the data is sent to the gateway through the LAN port modem router in my office and the device in headquarter both support IPSec VPN feature, so I decide to set up a
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 79
    ) and site B (remote network)'s LAN IP and WAN IP. 2. Configuration on site A (local network). 1 ) Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2 ) Go to Advanced > Network > IPSec VPN to open the configuration page. Click Add to set up a VPN tunnel. 75
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 80
    B's WAN IP address. 5 ) To configure Site A's LAN: In the Tunnel access from local IP addresses column, here we take Subnet Address as an example. Then input Mask of Site A. 6 ) To configure Site B's LAN: In the Tunnel access from local IP addresses column, here we take Subnet Address as an example.
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 81
    Pre-Shared Key for IKE authentication. Then keep Perfect Forward Secrecy enabled. Note: The key should consist of visible characters without blank space. Make sure Site A and Site B use the same key. 9 ) Leave the Advanced Settings as default value. Then click OK to save. 3. Configuration on Site
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 82
    replies from host in Site B), the IPSec connection is working properly now. Done! Now IPSec VPN is implemented to establish a connection. Note: 1. The product supports a maximum of ten simultaneous connections. 2. If one of the site has been off line for a while, for example, if Site A has been
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 83
    settings and administrate your modem router's network. This chapter contains the following sections: • Set System Time and Region • Update the Firmware • Back up and Restore Configuration Settings • Change the Administrator Account • Local Management • Remote Management • System Log • Monitor the
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 84
    Parental Controls and Wireless Schedule. You can manually set how to get the system time. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced the Internet. Make sure your modem router can access the Internet before you select this way to get
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 85
    file from our website: www.tp-link.com and upgrade the firmware to the latest version. Follow the steps below to update your firmware to the latest. 1. Download the latest firmware file from our website: www.tp-link.com. 2. Visit http://tplinkmodem.net, and log in with the password you set for the
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 86
    the restoring and then the modem router will automatically reboot. To reset the modem router to factory default settings: 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Click Advanced > System Tools > Backup & Restore page. 3. Click Factory Restore
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 87
    the local management. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > System Tools> Administration page. Locate the Local Management section. 3. Keep the Port as the default setting. Enter the IP address or MAC address of the local
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 88
    Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced Tick the checkbox to enable Remote Management. Keep the Port as the default setting. Leave the IP/MAC Address field blank. Service Account if you want to log in to the router through a domain name
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 89
    router does not work properly, you will need to save the system log and send it to the technical support for troubleshooting. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Click Advanced > System Tools > System Log page. To view the system logs
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 90
    sent and received packets, allowing you to monitor the volume of Internet traffic statistics. 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > System Tools > Statistics. 3. Toggle on Traffic Statistics, and then you can monitor the
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 91
    modem router offers CWMP feature. The function supports TR-069 protocol which collects information, diagnoses the devices and configures the devices automatically via ACS (Auto-Configuration Server). 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 92
    will be sent to the ACS. • ACS URL: Enter the web address of the ACS which is provided by your ISP. • ACS Username/Password: Enter the username/password to log in to the ACS server. • Interface used by TR-069 client: Select which interface to be used by the TR-069 client
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 93
    Port: Enter the port that connects to the ACS server. • Connection Request URL: Enter the URL that connects to the ACS server. • Get RPC methods: Click to get the methods to support . 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced >
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 94
    , and triggering SNMP traps when an event occurs. • Read-only Community: Displays the default public community string that protects the router from unauthorized access. • Set Community: Displays the default read and write community string that protects the router from unauthorized changes. • System
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 95
    802.3u, TCP/IP, PPPoA, PPPoE, SNTP, HTTP, DHCP, ICMP, NAT Safety & Emission Ports FCC, CE Four 10/100M Auto-Negotiation RJ45 ports (Auto MDI/MDIX) One RJ11 port One USB 2.0 port, one USB 3.0 port Network Medium 10Base-T: UTP category 3, 4, 5 cable 100Base-TX: UTP category-5, 5e cable 1000Base
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 96
    password? Web Management page password: Restore the modem router to its factory default settings and then set a new password using 1-15 characters. Wireless Network password: 1. The default Wireless Password address automatically. • Make sure the default access you input is right. • Check your
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 97
    4 ) Click LAN settings, deselect the following three options and click OK; 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 93
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 98
    Reset the modem router to factory default settings: With the modem router login fails, please contact the technical support. T4. What can I do if I cannot access the Internet? 1. Check to see T3 and then try to see if you can access the Internet. If the problem persists, please go to the next step.
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 99
    access the Internet, please restore your modem router to its factory default settings and reconfigure your modem router by following the instructions in Use Quick Setup Wizard. 6. Please contact our Technical Support if the problem still exists. T5. How to configure MAC Clone? You can manually
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 100
    in with password you set for the modem router. 3. Go to Advanced > Operation Mode page. 4. Select the Wireless Router Mode option or the 3G/4G Router Mode, then click Save to make the settings effective. Note: IPTV function is not supported in Wireless Router Mode. T7. How to use the WDS Bridging
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 101
    filled in. Configure the Security settings as the AP you choose to be bridged. 7. Click Save to make the settings effective. 8. Go to Advanced router) can have different SSID and password from the root router, you can change your modem router's SSID and password on Basic > Wireless page. T8.
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 102
    blocked somehow; 2 ) Clicking on Troubleshoot and windows might be able to fix the problem by itself. On Windows XP 1 TP-LINK Utility, for example); 3 ) Select and right click on My Computer on desktop, select Manage to open Computer Management window; 4 ) Expand Services and Applications > Services
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 103
    5 ) Select Wireless Zero Configuration, right click, and then select Properties; 6 ) Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK. 99
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 104
    signal. 4. Connect to wireless network. ¾¾ If you can find your wireless network but fail to connect, please follow the steps below: 1. Authenticating problem, password mismatch. 1 ) Sometimes it will ask you to type in a PIN number when you connect to the wireless network for the first time. This
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 105
    you cannot find the PIN or PIN failed, you may choose "Connecting using a security key instead", and then type in the Network Security Key/Wireless Password; 3 ) If it continues on saying network security key mismatch, it is suggested to confirm the wireless
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 106
    the router closer and try again; 2 ) Change the wireless Channel of the router to 1,6,or 11 to reduce interference from other networks; 3 ) Re-install or update the driver for your wireless adapter of the computer; 4 ) Connect to wireless network. 102
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 107
    COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 108
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 109
    outside of own premises, general authorization is required Luxembourg Norway Russian Federation None Implemented None General authorization required for network and service supply(not for spectrum) This subsection does not apply for the geographical area within a radius of 20 km from the centre
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 110
    of DFS mechanism described in ETSI standard EN 301 893 V1.3.1 and subsequent versions General authorization required if used outside Luxembourg Russian Federation Turkey None General authorization required for network and service supply(not for spectrum) No info Not implemented Defence systems
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 111
    Korea Warning Statements: NCC Notice & BSMI Notice: 項工作。 Safety Information • When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 112
    • Don't disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. • Avoid water and wet locations. This product can be used in the following countries: AT BG BY CA CZ DE DK EE
  • TP-Link Archer VR200 | Archer VR200 V1 User Guide - Page 113
    Band Gigabit VDSL2 Modem Router Model No.: Archer VR200 Trademark: TP-LINK We declare under our own responsibility that the product is in conformity with the following standards or other normative documents EN 300 328 V1.8.1 EN 301 489-1 V1.9.2 & EN 301 489-17 V2.2.1 EN 55022: 2010 + AC: 2011 EN
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
REV1.0.0
1910011417
Archer VR200
User Guide
AC750 Wireless Dual Band Gigabit
VDSL2 Modem Router