TP-Link T1600G-28TS T1600G-18TSUN V2 Installation Guide
TP-Link T1600G-28TS Manual
View all TP-Link T1600G-28TS manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link T1600G-28TS manual content summary:
- TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 1
Business Networking Solution Installation Guide Jetstream Smart Switch T1500G-10MPS / T1600G-28TS / T1600G-28PS T1500-28TC (TL-SL2428) / T1500-28PCT (TL-SL2428P) T1600G-18TS (TL-SG2216) / T1600G-52TS (TL-SG2452) T1600G-52PS (TL-SG2452P) / T1700G-28TQ / T1700X-16TS - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 2
- TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 3
Appendix A Troubleshooting Appendix B Hardware Specifications Audience This Installation Guide is for: Network Engineer Network Administrator Conventions • Some models featured in this guide may be unavailable in your country or region. For local sales information, visit http://www.tp-link.com - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 4
Installation 10 Chapter 3 Connection 12 3.1 Ethernet Port 12 3.2 SFP/SFP+ Port 12 3.3 Verify Installation 13 3.4 Power On 13 3.5 Initialization 13 3.6 Accessing the Switch 13 Appendix A Troubleshooting--------- 14 Appendix B Specifications---------- 15 - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 5
workgroups and departments, TP-Link JetStream Smart Switch provides wire-speed performance and abundant L2 management features. It provides a variety of service features and multiple powerful functions with high security. The EIA-standardized framework and smart configuration capacity can provide - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 6
SFP Port Switch Button RJ45 Port and PoE Port The front panel of T1600G-18TS (TL-SG2216) is shown as the following figure. Figure 1-4 Front Panel of T1600G-18TS (TL-SG2216) LEDs Reset 10/100/1000Mbps RJ45 Port SFP Port The front panel of T1600G-28TS is shown as the following figure. Figure - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 7
-28TQ SFP Port LEDs Unit ID LED Reset 10/100/1000Mbps RJ45 Port SFP+ Port Link/Act for T1600G-18TS (TL-SG2216), T1600G28TS, T1700G-28TQ. 1000Mbps On: Running at 1000Mbps. Off: Running at 10/100Mbps or no device is linked to the corresponding port. Note: For T1600G-18TS (TL-SG2216), T1600G-28TS - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 8
device is linked to the T1600G-52PS (TL-SG2452P) has an LED mode switch button which is used to switch the LED status indication. When the Speed LED is on, the port LED is indicating the data transmission rate. When the PoE LED is on, the port LED is indicating the power supply status. By default - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 9
at 10/100Mbps and is transmitting or receiving data. Off: No device is linked to the corresponding port. Note: 1000M for T1500-28PCT. Speed or PoE for T1500G-10MPS, 1-24 ports of T1600G-28PS and 1-48 ports of T1600G-52PS (TL-SG2452P) Green On: The port is supplying power normally. Green Flashing - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 10
LED Mode Switch Button Press this button to switch the LED status indication between Speed and PoE. Reset With the switch powered on, press Reset button for 5 seconds to reset the software setting to its factory default settings. Unit ID LED Designed to display the stack Unit ID of the switch. For - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 11
panel is shown as the following figure. Here we take T1600G-28TS as an example. Figure 1-11 Rear Panel Kensington Security slot please refer to the Lightning Protection Guide from the training center of our website http://www.tp-link.com/en/configuration-guides.html. Power Socket Connect the female - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 12
of the listed items is damaged or missing, please contact your distributor. One Switch One Power Cord Installation Guide Business Networking Solution Installation Guide One Resouce CD Two mounting brackets and the fittings 2.2 Safety Precautions To avoid any device damage and bodily injury - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 13
high/low humidity may lead to bad insulation, electricity leakage, mechanical property changes and corrosions. Too high temperature may accelerate aging of the insulation materials and can thus significantly shorten the service life of the device. For normal temperature and humidity of the device - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 14
the training center of our website http://www.tp-link.com/en/configuration-guides.html. Installation Site When installing the device on a rack or a flat workbench, please note the following items: ■■ The rack or workbench is flat and stable, and sturdy enough to support the weight of 5.5kg at least - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 15
Smart Switch Feet Bottom of the Device Notch ■■ Rack Installation To install the device in an EIA standard-sized, 19-inch rack, follow the instructions described below: 1. Check the grounding and stability of the rack. 2. Secure the supplied rack-mounting brackets to each side of the device with - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 16
JetStream Smart Switch Chapter 3 Connection 3.1 Ethernet Port Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shows. Figure 3-1 Connecting the RJ45 Port RJ45 Port RJ45 Cable 3.2 SFP/SFP+ Port The following figure demonstrates the connection of - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 17
can use Telnet and SSH connection. For the detailed configurations, please refer to the Configuration Guide and CLI Reference Guide. The two guides can both be found on the resource CD or on the download center of our official website: http://www.tp-link.com/en/download-center.html. Connection 13 - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 18
of your PC is set within the subnet of the switch. 5. If you still cannot access the configuration page, please restore the switch to its factory defaults. Then the IP address of your PC should be set as 192.168.0.x ("x" is any number from 2 to 254) and Subnet Mask as 255.255.255.0. 14 Appendix - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 19
PWR, SYS, PoE MA X, FAN, 10/100M or PoE, 1000M, 10/100M PoE T1500G-10MPS: PWR, SYS, PoE MAX, FAN, Speed or PoE, SFP1, SFP2, PoE, Speed T1600G-18TS / T1600G 28TS: PWR, SYS, 1000Mbps, Link/Act T1600G-52TS: PWR, SYS, 10/100/1000Mbps, Link/Act T1600G-28PS / T1600G-52PS: PWR, SYS, FAN, PoE MAX, Speed or - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 20
in accordance with the instruction manual, may cause harmful interference undesired operation. Any changes or modifications not declaration of conformity may be found at http://www.tp-link.com/en/ce Safety Information • When product has service, please contact us. • Avoid water and wet locations. - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 21
BSMI Notice 鉛 鎘 汞 六價鉻 Pb Cd Hg CrVI PBB PBDE PCB ○ ○ ○ ○ ○ ○ 外殼 ○ ○ ○ ○ ○ ○ 備考1. "超出0.1 wt 0.01 wt 2 3 Industry Canada Statement CAN ICES-3 (A)/NMB-3(A) Explanation of the symbols on the product label Symbol Explanation AC voltage - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 22
A VCCI-A - TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 23
- TP-Link T1600G-28TS | T1600G-18TSUN V2 Installation Guide - Page 24
For technical support, User Guide and other information, please visit http://www.tp-link.com/support, or simply scan the QR code © 2017 TP-Link 7106507852 REV3.0.0
Business Networking Solution
Installation Guide
Jetstream Smart Switch
T1500G-10MPS / T1600G-28TS / T1600G-28PS
T1500-28TC (TL-SL2428) / T1500-28PCT (TL-SL2428P)
T1600G-18TS (TL-SG2216) / T1600G-52TS (TL-SG2452)
T1600G-52PS (TL-SG2452P) / T1700G-28TQ / T1700X-16TS