TP-Link TD-8616 User Guide
TP-Link TD-8616 Manual
 |
UPC - 845973060220
View all TP-Link TD-8616 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TD-8616 manual content summary:
- TP-Link TD-8616 | User Guide - Page 1
TD-8616 ADSL2/2+ Ethernet Modem Rev: 1.0.1 1910010001 - TP-Link TD-8616 | User Guide - Page 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced - TP-Link TD-8616 | User Guide - Page 3
and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer - TP-Link TD-8616 | User Guide - Page 4
be found in your package: ¾ One TD-8616 ADSL2/2+ Ethernet Modem ¾ One AC power Adapter for TD-8616 ADSL2/2+ Ethernet Modem ¾ Quick Installation Guide ¾ One RJ45 cable ¾ Two RJ11 cables ¾ One ADSL splitter ¾ One Resource CD , including: z This User Guide z Other Helpful Information ) Note: Make sure - TP-Link TD-8616 | User Guide - Page 5
2.3 Installation Environment 3 2.4 Connecting the Modem 3 Chapter 3. Quick Installation Guide 5 3.1 Configure PC...5 3.2 Login ...8 Chapter 4. Software Configuration 10 4.1 Statistics ...10 4.2 Basic Setup ...11 4.2.1 WAN Setting...12 4.2.2 LAN Setting ...12 4.2.3 ADSL ...13 4.3 Maintenance...13 - TP-Link TD-8616 | User Guide - Page 6
via standard Ethernet ports. The ADSL connection is made using ordinary telephone line with standard connectors. Multiple workstations can be networked and connected to the Internet using a single Wide Area Network (WAN) interface and single global IP address. ADSL The TD-8616 supports full - TP-Link TD-8616 | User Guide - Page 7
TD-8616 ADSL2/2+ Ethernet Modem User Guide Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locate on the front panel, which indicate the device's working status. For details, please refer to LED Explanation. LED Explanation: Name LAN ADSL Act Power Status On Off Flash - TP-Link TD-8616 | User Guide - Page 8
TD-8616 ADSL2/2+ Ethernet Modem User Guide ¾ LAN: Through the port, you can connect the Modem to your PC or the other Ethernet network devices. ¾ LINE: Through the port, you can connect the Modem with the telephone. 2.3 Installation Environment ¾ The Product should not be located where it will be - TP-Link TD-8616 | User Guide - Page 9
TD-8616 ADSL2/2+ Ethernet Modem User Guide Figure 2-3 4 - TP-Link TD-8616 | User Guide - Page 10
TD-8616 ADSL2/2+ Ethernet Modem User Guide Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-8616 or connect your adapter to a Hub/Switch which has connected to the Router, you need to configure your PC's IP address. Follow the steps below to configure - TP-Link TD-8616 | User Guide - Page 11
TD-8616 ADSL2/2+ Ethernet Modem User Guide Figure 3-2 Step 3: Select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button. Figure 3-3 6 - TP-Link TD-8616 | User Guide - Page 12
TD-8616 ADSL2/2+ Ethernet Modem User Guide Step 4: Configure the IP address (Figure 3-4): Enter the IP address as 192.168.1.* (* is any value between 2 to 254, Subnet mask is 255.255.255.0). After that, click OK. ) Note: Figure 3-4 1) The users of Windows 98 can open TCP/IP Properties according - TP-Link TD-8616 | User Guide - Page 13
-8616 ADSL2/2+ Ethernet Modem User Guide Figure 3-5 If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Modem. Figure 3-6 You can check it follow the steps below: 1) Is the connection between your PC and the Modem correct? The LEDs of LAN port - TP-Link TD-8616 | User Guide - Page 14
TD-8616 ADSL2/2+ Ethernet Modem User Guide Figure 3-7 After that you will see the page as follow when ADSL connection is OK. Figure 3-8 9 - TP-Link TD-8616 | User Guide - Page 15
TD-8616 ADSL2/2+ Ethernet Modem User Guide Chapter 4. Software Configuration This User Guide recommends using the "Quick Installation Guide" for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, maybe you - TP-Link TD-8616 | User Guide - Page 16
TD-8616 ADSL2/2+ Ethernet Modem User Guide Figure 4-2 Choose "Statistics→Traffic Statistics" menu, and you will be able to view the traffic statistics about the Modem. Figure 4-3 4.2 Basic Setup Choose "Basic Setup", you can see the next submenus: WAN Setting, LAN Setting and ADSL. Figure 4-4 11 - TP-Link TD-8616 | User Guide - Page 17
TD-8616 ADSL2/2+ Ethernet Modem User Guide Click any of them, and you will be able to configure the corresponding function. 4.2.1 WAN Setting Choose "Basic Setup→WAN Setting" menu, you can configure the parameters for WAN ports virtual channel endpoints in an ATM network. The valid range is from 32 - TP-Link TD-8616 | User Guide - Page 18
the Modem's local IP Address, then you can access to the Web-based Utility via the IP Address, the default value is 192.168.1.1. • IP Subnet Mask: Enter the Modem's Subnet Mask, the default value is 255.255.255.0. 4.2.3 ADSL Choose "Basic Setup→ADSL", you can select the ADSL Type and ADSL Mode in - TP-Link TD-8616 | User Guide - Page 19
TD-8616 ADSL2/2+ Ethernet Modem User Guide 4.3.1 Administration Choose "Maintenance→Administrator", you can set new password for admin in the screen (shown in Figure 4-8). Figure 4-8 ) Note: 1) There is only one account that can access Web-Management interface. The default account is "admin", and - TP-Link TD-8616 | User Guide - Page 20
TD-8616 ADSL2/2+ Ethernet Modem User Guide Step 2: Type the path and file name of the update file into the "New Firmware Location" field. Or click the Browse button to locate the update file. Step 3: Click the UPGRADE button. ) Note: 1) New firmware versions are posted at www.tp-link.com and can be - TP-Link TD-8616 | User Guide - Page 21
TD-8616 ADSL2/2+ Ethernet Modem User Guide Figure 4-11 16 - TP-Link TD-8616 | User Guide - Page 22
TD-8616 ADSL2/2+ Ethernet Modem User Guide Appendix A: Specification General ANSI T1.413, ITU G.992.1, ITU G.992.2, ITU G.992.3, G.992.4, ITU Standards and Protocols G.992.5, IEEE 802.3, IEEE 802.3u, TCP/IP, HTTP Safety & Emission Ports FCC、CE 1 10/100M Auto-Negotiation RJ45 port（Auto MDI/MDIX)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
 |
 |
TD-8616
ADSL2/2+ Ethernet Modem
Rev: 1.0.1
1910010001