TP-Link TD-8816 User Guide

TP-Link TD-8816 Manual

Get TP-Link TD-8816 PDF manuals and user guides
UPC - 845973060022
View all TP-Link TD-8816 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link TD-8816 manual content summary:

  • TP-Link TD-8816 | User Guide - Page 1
    TD-8816 ADSL2/2+ Ethernet Router Rev: 1.0.1 1910010016
  • TP-Link TD-8816 | User Guide - Page 2
    COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced
  • TP-Link TD-8816 | User Guide - Page 3
    . This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
  • TP-Link TD-8816 | User Guide - Page 4
    be found in your package: ¾ One TD-8816 ADSL2/2+ Ethernet Router ¾ One AC power Adapter for TD-8816 ADSL2/2+ Ethernet Router ¾ Quick Installation Guide ¾ One RJ45 cable ¾ Two RJ11 cables ¾ One ADSL splitter ¾ One Resource CD , including: z This User Guide z Other Helpful Information ) Note: Make
  • TP-Link TD-8816 | User Guide - Page 5
    Router 4 Chapter 3. Quick Installation Guide 6 3.1 Configure PC...6 3.2 Login ...9 Chapter 4. Software Configuration 12 4.1 Status ...12 4.2 Quick Start ...13 4.3 Interface Setup...13 4.3.1 Internet ...14 4.3.2 LAN...18 4.4 Advanced Setup...21 4.4.1 Firewall ...21 4.4.2 Routing ...21 4.4.3 NAT
  • TP-Link TD-8816 | User Guide - Page 6
    4.6.4 System Restart...46 4.6.5 Diagnostic...46 4.7 Help...46 Appendix A: Specification 48
  • TP-Link TD-8816 | User Guide - Page 7
    and friendly help messages are provided for the configuration. Network and Router management is done through the Web-based Utility which can be accessed through local Ethernet using any web browser. ADSL The TD-8816 supports full-rate ADSL2+ connectivity conforming to the ITU and ANSI specifications
  • TP-Link TD-8816 | User Guide - Page 8
    TD-8816 ADSL2/2+ Ethernet Router User Guide ¾ Supports Multiple PVC (Permanent Virtual Circuit). ¾ Built-in DHCP server. ¾ Built-in firewall, supports IP/MAC filter, Application filter and URL filter. ¾ Supports Virtual Server, DMZ host and IP Address Mapping. ¾ Supports Dynamic DNS, UPnP and Static
  • TP-Link TD-8816 | User Guide - Page 9
    TD-8816 ADSL2/2+ Ethernet Router User Guide Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locates on the front panel, they indicate the device's working status. For details, please refer to LED Explanation. LED Explanation: Name LAN ADSL ACT Power Status On Off Flash
  • TP-Link TD-8816 | User Guide - Page 10
    TD-8816 ADSL2/2+ Ethernet Router User Guide devices. ¾ LINE: Through the port, you can connect the Router with the telephone. 2.3 Installation Environment ¾ The Product should not be located where it will be exposed to moisture or excessive heat. ¾ Place the Router in a location where it can be
  • TP-Link TD-8816 | User Guide - Page 11
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 2-3 5
  • TP-Link TD-8816 | User Guide - Page 12
    TD-8816 ADSL2/2+ Ethernet Router User Guide Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-8816 or connect your adapter to a Hub/Switch which has connected to the Router, you need to configure your PC's IP address. Follow the steps below to
  • TP-Link TD-8816 | User Guide - Page 13
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 3-2 Step 3: Select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button. Figure 3-3 7
  • TP-Link TD-8816 | User Guide - Page 14
    TD-8816 ADSL2/2+ Ethernet Router User Guide Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK. Figure 3-4 ) Note: You can configure the PC to get an IP address automatically, select "Obtain an IP address automatically" and "Obtain DNS server address automatically" in the
  • TP-Link TD-8816 | User Guide - Page 15
    TD-8816 ADSL2/2+ Ethernet Router User Guide If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Router. Figure 3-6 You can check it follow the steps below: 1) Is the connection between your PC and the Router correct? The LEDs of LAN port which
  • TP-Link TD-8816 | User Guide - Page 16
    TD-8816 ADSL2/2+ Ethernet Router User Guide Step 1: Select the Quick Start tab, then click RUN WIZARD, and you will see the next screen. Click the NEXT button. Figure 3-8 Step 2: Configure the time for the Router, and then click the NEXT button. Figure 3-9 Step 3: Select the connection type to
  • TP-Link TD-8816 | User Guide - Page 17
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 3-11 Step 5: Click NEXT to finish the Quick Start. Figure 3-12 11
  • TP-Link TD-8816 | User Guide - Page 18
    TD-8816 ADSL2/2+ Ethernet Router User Guide Chapter 4. Software Configuration This User Guide recommends using the "Quick Installation Guide" for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, maybe you
  • TP-Link TD-8816 | User Guide - Page 19
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-2 ) Note: Click the other submenus System Log or Statistics in Figure 4-2, you will be able to view the system log and traffic statistics about the Router. 4.2 Quick Start Please refer to " 3.2: Login". 4.3 Interface Setup Choose "Interface Setup
  • TP-Link TD-8816 | User Guide - Page 20
    TD-8816 ADSL2/2+ Ethernet Router User Guide 4.3.1 Internet Choose "Interface Setup→Internet" menu, you can configure the parameters for WAN ports in the next screen (shown in Figure 4-4). Figure 4-4 ¾ ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path
  • TP-Link TD-8816 | User Guide - Page 21
    TD-8816 ADSL2/2+ Ethernet Router User Guide • Virtual Circuit: Select the VC number you want to setup, PVC0~PVC7. • Status: If you want to use a designed VC, you should activate it. • VPI: Identifies the virtual path between endpoints in an ATM network. The valid range
  • TP-Link TD-8816 | User Guide - Page 22
    TD-8816 ADSL2/2+ Ethernet Router User Guide for WAN interface, including RIP1 ADSL ATU-R supports both IGMP version 1 (IGMP v1) and IGMP v2. Select "Disabled" to disable it. 2. Static IP Address Select this option if your ISP provides static IP information to you. You should set static IP address, IP
  • TP-Link TD-8816 | User Guide - Page 23
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-7 ¾ Username: Enter your username for your PPPoE/PPPoA connection. ¾ Password: Enter your password for your PPPoE/PPPoA connection. ¾ Encapsulation: For both PPPoE/PPPoA connection, you need to specify the type of Multiplexing, either LLC or VC
  • TP-Link TD-8816 | User Guide - Page 24
    TD-8816 ADSL2/2+ Ethernet Router User Guide If you select this type of connection, the modem can be configured to act as a bridging device between your LAN and your ISP. Bridges are devices that enable two or more networks to communicate as if they are two segments of the same physical LAN. Figure
  • TP-Link TD-8816 | User Guide - Page 25
    TD-8816 ADSL2/2+ Ethernet Router User Guide Internet. • IP Address: Enter the Router's local IP Address, then you can access to the Web-based Utility via the IP Address, the default value is 192.168.1.1. • IP Subnet Mask: Enter the Router's Subnet Mask, the default value is 255.255.255.0. • Dynamic
  • TP-Link TD-8816 | User Guide - Page 26
    TD-8816 ADSL2/2+ Ethernet Router User Guide • Lease Time: The length of time for the IP lease. After the dynamic IP address has expired, the user will be automatically assigned a new dynamic IP address. The default is 259200 seconds. • DNS Relay: If you want to disable this feature, you just need to
  • TP-Link TD-8816 | User Guide - Page 27
    TD-8816 ADSL2/2+ Ethernet Router User Guide 4.4 Advanced Setup Choose "Advanced Setup", you can see the next submenus: Figure 4-12 Click any of them, and you will be able to configure the corresponding function. 4.4.1 Firewall Choose "Advanced Setup→Firewall" menu, and you will see the next screen (
  • TP-Link TD-8816 | User Guide - Page 28
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-14 Click ADD ROUTE button to add a new route in the next screen (shown in Figure 4-15). Figure 4-15 ¾ Destination IP Address: This parameter specifies the IP network address of the final destination. ¾ IP Subnet Mask: Enter the subnet mask for
  • TP-Link TD-8816 | User Guide - Page 29
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-16 ¾ Virtual Circuit: Enter Virtual Circuit Index that you plan to setup for the NAT function. ¾ NAT Status: This field shows the current status of the NAT function for the current VC. You can go to the previous screen (shown in Figure 4-4) to
  • TP-Link TD-8816 | User Guide - Page 30
    TD-8816 ADSL2/2+ Ethernet Router User Guide The Virtual Server is the server or server(s) behind NAT (on the LAN), for example, Web server or FTP server, that you can make visible to the outside world even though NAT makes your whole inside network appear as a single machine to the outside world.
  • TP-Link TD-8816 | User Guide - Page 31
    TD-8816 ADSL2/2+ Ethernet Router User Guide 4.4.3.3. IP Address Mapping Choose "Advanced Setup→NAT→IP Address Mapping" in Figure 4-16, you can configure the Address Mapping Rule in the next screen. The IP Address Mapping is for those VCs that configured with multiple IPs. The IP Address Mapping rule
  • TP-Link TD-8816 | User Guide - Page 32
    TD-8816 ADSL2/2+ Ethernet Router User Guide Click the Back button to return to the previous screen. Click the CANCEL button to cancel the configuration which is made just now. 4.4.4 QoS Choose "Advanced Setup→QoS", you can configure the QoS in the next screen. QoS helps to prioritize data as it
  • TP-Link TD-8816 | User Guide - Page 33
    TD-8816 ADSL2/2+ Ethernet Router User Guide DiffServ). ¾ Summary: Click the button to view the configurations of QoS. ¾ Rule: Configure the rules for QoS. If the traffic complies with the rule, then the Router will take the corresponding action to deal with it. • Rule Index: Select the index for the
  • TP-Link TD-8816 | User Guide - Page 34
    TD-8816 ADSL2/2+ Ethernet Router User Guide can communicate as if they were attached to the same wire, when in fact they are located on a number of different LAN segments. Because VLANs are based on logical instead of physical connections, it is very flexible for user/host management, bandwidth
  • TP-Link TD-8816 | User Guide - Page 35
    TD-8816 ADSL2/2+ Ethernet Router User Guide 2. Define VLAN ADSL Choose "Advanced Setup→ADSL", you can select the ADSL Type and ADSL Mode in the next screen. The ADSL feature can be selected when you meet the physical connection problem. Please check the proper settings with your Internet service
  • TP-Link TD-8816 | User Guide - Page 36
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-24 ¾ ADSL Mode: Select the ADSL operation mode which your ADSL connection uses. ¾ ADSL Type: Select the ADSL operation type which your ADSL connection uses. 4.5 Access Management Choose "Access Management", you can see the next submenus: Figure 4-
  • TP-Link TD-8816 | User Guide - Page 37
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-26 ¾ ACL: If Activated, the IP addresses which are contained in the Access Control List can access to the Router. If Deactivated, all IP addresses can access to the Router. ¾ ACL Rule Index: Select the ACL rule index for the entry. ¾ Active:
  • TP-Link TD-8816 | User Guide - Page 38
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-27 ¾ Filter Type Selection: Select the filter type for the next configuration. ¾ IP/MAC Filter Set Index: Select the Set index for the IP Filter entry. This index can match with six IP / MAC Filter Rule Indexes. ¾ Interface: Select the interface
  • TP-Link TD-8816 | User Guide - Page 39
    TD-8816 ADSL2/2+ Ethernet Router User Guide allowed by setting up filters. ¾ IP/MAC Filter Rule Index: Select the Rule index for the IP Filter entry. ) Note: You should set the IP/MAC Filter Set Index and IP/MAC Filter Rule Index together to appoint the address (shown in the Filter List) for the IP
  • TP-Link TD-8816 | User Guide - Page 40
    ) Note: TD-8816 ADSL2/2+ Ethernet Router User Guide If you want to make the rule take effect, please select Yes to active the rule. Step 3: Enter the "Source IP Address", "Destination IP Address", "Subnet Mask" and "Port Number" in the corresponding field. Step 4: Select the Protocol as "TCP" and
  • TP-Link TD-8816 | User Guide - Page 41
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-28 ¾ Rule Type: Select MAC for the MAC Filter rule. ¾ Active: Select "Yes" to make the rule to take effect. ¾ MAC Address: Enter the MAC address for the rule. ¾ Rule Unmatched: If the current rule can not match, and you select Forward, the router
  • TP-Link TD-8816 | User Guide - Page 42
    TD-8816 ADSL2/2+ Ethernet Router User Guide select the Interface "PVC0", and select the Direction "Outgoing" configurations for the entries as shown in Figure 4-27: Enter the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to view or modify the entry. Enter the IP / MAC Filter Set Index and IP
  • TP-Link TD-8816 | User Guide - Page 43
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-29 ¾ Filter Type Selection: Select the Application Filter for the next configuration. ¾ Application Filter: Activate or deactivate the function. ¾ ICQ & MSN & YMSG & Real Audio/Video: Select Allow or Deny for these applications. If you select
  • TP-Link TD-8816 | User Guide - Page 44
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-30 ¾ Filter Type Selection: Select the URL Filter for the next configuration. ¾ Active: Select "Yes" to make the rule to take effect to delete the entry. 4.5.3 SNMP Choose "Access Management→SNMP", you can see the SNMP screen. The Simple Network 38
  • TP-Link TD-8816 | User Guide - Page 45
    TD-8816 ADSL2/2+ Ethernet Router User Guide Management Protocol (SNMP) is used for exchanging information between network devices. Figure 4-31 ¾ Get Community: Select to set the password for the incoming Get and Get next requests from the management station. ¾ Set Community: Select to set the
  • TP-Link TD-8816 | User Guide - Page 46
    TD-8816 ADSL2/2+ Ethernet Router User Guide 4.5.5 DDNS Choose "Access Management→DDNS", you can configure the DDNS function in the screen (shown in Figure 4-33). The router offers a Dynamic Domain Name System (DDNS) feature. The feature lets you use a static host name with a dynamic IP address. User
  • TP-Link TD-8816 | User Guide - Page 47
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-34 ¾ CWMP: Select activate the CWMP function. ¾ URL: Enter the website of ACS which is provided by your ISP. ¾ User Name/Password: Enter the User Name and password to login the ACS server. ¾ Path: Enter the path that connects to the ACS server. ¾
  • TP-Link TD-8816 | User Guide - Page 48
    Figure 4-36). TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-36 ) Note: 1) There is only one account that can access Web-Management interface. The default account is "admin", and the password is "admin". Admin has read/write access privilege. 2) When you change the password, you should enter
  • TP-Link TD-8816 | User Guide - Page 49
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-37 ) Note: The ADSL Router built-in some NTP Servers, when the Router connects to the Internet, the Router will get the system time automatically from the NTP Server. You can also configure the NTP Server address automatically, and then the Router
  • TP-Link TD-8816 | User Guide - Page 50
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-39 4.6.3 Firmware Choose "Maintenance→Firmware", you can upgrade the firmware of the Router in the screen (shown in Figure 4-40). Make sure the firmware or romfile you want to use is on the local hard drive of the computer. Click Browse to find
  • TP-Link TD-8816 | User Guide - Page 51
    TD-8816 ADSL2/2+ Ethernet Router User Guide the router is not experiencing difficulties, there is no need to download a more recent firmware version, unless the version has a new feature that you want to use. 2) When you upgrade the router's firmware, you may lose its current configurations, so
  • TP-Link TD-8816 | User Guide - Page 52
    TD-8816 ADSL2/2+ Ethernet Router User Guide Step 1: Click the Browse button to can select to restart the device with current settings or restore to factory default settings in the screen (shown in Figure 4-43). Figure 4-43 4.6.5 you can view the help information for configuration of any function. 46
  • TP-Link TD-8816 | User Guide - Page 53
    TD-8816 ADSL2/2+ Ethernet Router User Guide Figure 4-45 ) Note: Click the tab, and you will be able to get the corresponding information. 47
  • TP-Link TD-8816 | User Guide - Page 54
    TD-8816 ADSL2/2+ Ethernet Router User Guide Appendix A: Specification General ANSI T1.413, ITU G.992.1, ITU G.992.2, ITU G.992.3, ITU G.992.5 Standards and Protocols IEEE 802.3, IEEE 802.3u, TCP/IP, PPPoA , PPPoE, SNTP, HTTP, DHCP, ICMP, NAT,CWMP Safety & Emission FCC、CE Ports 1 10/100M
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
TD-8816
ADSL2/2+ Ethernet Router
Rev: 1.0.1
1910010016