TP-Link TD-VG5612 TD-VG5612 V1 Telephony Feature Guide

TD-VG5612

300Mbps Wireless N VoIP VDSL/ADSL Modem Router

Telephony Feature Guide

www.tp-link.com

TP-LINK TECHNOLOGIES CO., LTD.

E-mail: [email protected]

Website: www.tp-link.com

Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK

TECHNOLOGIES CO., LTD. Other brands and product names are trademarks of their respective

holders. Copyright©2015 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.

7106505724 REV1.0.0

This feature allows

three people to communicate at the same time.

To set up a three-way call, please follow the steps below:

1.

Press the

FLASH

button to put the first call on hold.

2.

Dial the destination number.

3.

Wait for the third party to answer and then press

FLASH

followed by the number 3. Now the three-way call is

successfully set up.

4.

To drop yourself out of the call, simply hang up.

A three-way call can also be set up during a call with Call Waiting enabled. When hearing the call waiting tone during a

call, press

FLASH

followed by the number 3.

Note: The call will end if the initiator of the three-way call hangs up. However, the call will not end if anyone of the other two

parties hangs up. The left two parties remain connected to each other.

This feature allows you to create short numbers for your frequently used telephone numbers to make your

dialing more convenient. You just need to press one or two digits and the key # instead of the original

phone number to make a call.

With this feature enabled, a call will be automatically directed to a specified party without taking any

additional action when the phone goes off-hook for a certain time. To use this feature, you need to set

warm line numbers first on the web management page.

Three-way Call

Warm Line

DND (Do Not Disturb)

With this feature enabled, all the incoming calls will be blocked and the caller will hear the busy tone.

Speed Dial