TP-Link TD-W8151N User Guide - Page 11
Hardware Installation - qss
View all TP-Link TD-W8151N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
TD-W8151N 150Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 2 Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs, locating on the front panel, indicates the device's working status. For details, please refer to LED Explanation. LED Explanation: Name Status Indication Power On Power is on. Off Power is off. On The LINE port is linked up. ADSL Flash The ADSL negotiation is in progress. Off The LINE port is linked down. On A successful PPP connection has been built. Internet Flash Off Data is being transferred over the Internet. There is no successful PPP connection or the Router works on Bridge mode. On The wireless function is enabled but no data is being transmitted. WLAN Flash There is wireless data being transmitted. Off The wireless function is disabled. On There is a successful connection on the LAN port but no activity. LAN Flash Data is being transferred over the LAN port. Off There is no connection on the LAN port or the connection is abnormal. A wireless device is connecting to the network by QSS function. Flash This process will last in the first 2 minutes and then turn off. QSS A wireless device has been successfully added to the network by On QSS function. The QSS LED will keep on for about 5 minutes and then turn off. The QSS function is disabled or a wireless device is failed to add Off the network. 4