TP-Link TD-W8151N User Guide - Page 40

Advanced Setup - wds

Get TP-Link TD-W8151N PDF manuals and user guides View all TP-Link TD-W8151N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

TD-W8151N 150Mbps Wireless N ADSL2+ Modem Router User Guide • SSID: Wireless network name shared among all points in a wireless network. The SSID must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 characters (use any of the characters on the keyboard). Make sure this setting is the same for all stations in your wireless network. Type the desired SSID in the space provided. • Authentication Type: Select an authentication type from the drop-down list, which allows you to configure security features of the wireless LAN interface. Options available are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/ WPA2-PSK. ¾ WDS Settings: Select On/Off to enable/disable WDS. With this function enabled, the Router can bridge two or more WLANs. • MAC Address: Enter the MAC Address you wish to bridge in the field. ¾ Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network's RADIUS. • Active: If you wish to filter users by MAC Address, select "Activated", and "Deactived" for don't. • Action: To filter wireless users by MAC Address, select "Allow Association" or "Deny Association" the follow Wireless LAN station(s) association. • MAC Address: Enter the MAC Address you wish to filter in the field. 4.4 Advanced Setup Choose "Advanced Setup", you can see the next submenus: Figure 4-22 Click any of them, and you will be able to configure the corresponding function. 4.4.1 Firewall Choose "Advanced Setup→Firewall" menu, and you will see the next screen (shown in Figure 4-23). Figure 4-23 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
TD-W8151N
150Mbps Wireless N ADSL2+ Modem Router User Guide
33
•
SSID:
Wireless network name shared among all points in a wireless network. The SSID
must be identical for all devices in the wireless network. It is case-sensitive and must not
exceed 32 characters (use any of the characters on the keyboard). Make sure this setting
is the same for all stations in your wireless network. Type the desired SSID in the space
provided.
•
Authentication Type:
Select an authentication type from the drop-down list, which
allows you to configure security features of the wireless LAN interface. Options available
are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/
WPA2-PSK.
¾
WDS Settings:
Select On/Off to enable/disable WDS. With this function enabled, the Router
can bridge two or more WLANs.
•
MAC Address:
Enter the MAC Address you wish to bridge in the field.
¾
Wireless MAC Address Filter:
Wireless access can be filtered by using the MAC addresses
of the wireless devices transmitting within your network’s RADIUS.
•
Active:
If you wish to filter users by MAC Address, select “Activated”, and “Deactived” for
don’t.
•
Action:
To filter wireless users by MAC Address, select “Allow Association” or “Deny
Association” the follow Wireless LAN station(s) association.
•
MAC Address:
Enter the MAC Address you wish to filter in the field.
4.4
Advanced Setup
Choose “
Advanced Setup
”, you can see the next submenus:
Figure 4-22
Click any of them, and you will be able to configure the corresponding function.
4.4.1 Firewall
Choose “
Advanced Setup
→
Firewall
” menu, and you will see the next screen (shown in Figure
4-23).
Figure 4-23