TP-Link TD-W8950N TD-W8950N V1 User Guide 1910010940
TP-Link TD-W8950N Manual
 |
View all TP-Link TD-W8950N manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TD-W8950N manual content summary:
- TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 1
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router Rev: 1.0.0 1910010940 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 3
, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 4
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 5
power source. Don't disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations. This product can be used in the following countries: AT BG BY CA CZ DE DK EE - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 6
150Mbps Wireless N ADSL2+ Modem Router Model No.: TD-W8950N Trademark: TP-LINK We declare under our own responsibility that the above with the following standards or other normative documents ETSI EN 300 328 V1.7.1: 2006 ETSI EN 301 489-1 V1.9.2:2011& ETSI EN 301 489-17 V2.2.1:2012 EN 55022:2010 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 7
8 Chapter 3. Quick Installation Guide 10 3.1 TCP/IP Configuration ...10 3.2 Quick Installation Guide 11 Chapter 4. Configuring the Modem Router 15 4.1 Login ...15 4.2 Device Info ...15 4.3 Quick Setup...16 4.4 Advanced Setup...16 4.4.1 Layer2 Interface ...17 4.4.2 WAN Service...20 4.4.3 MAC Clone - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 8
4.9.3 SNMP Agent ...92 4.9.4 TR-069 client...93 4.9.5 Internet Time ...94 4.9.6 Access Control ...95 4.9.7 Update Firmware...97 4.9.8 Reboot...98 4.10Logout ...98 Appendix A: Specifications 100 Appendix B: Configuring the PC 101 Appendix C: Troubleshooting 105 Appendix D: Technical Support 108 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 9
Package Contents The following contents should be found in your package: One TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router One power Adapter for TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router Quick Installation Guide One RJ45 cable Two RJ11 cables One ADSL splitter One Resource CD - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 10
PSK, WPA-PSK), as well as advanced Firewall protections, the TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router provides complete data privacy. Setup Wizard is supported and detailed instructions are provided step by step in this user guide. Before installing the router, please look through this guide - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 11
Supports bridge mode and router function Supports Web management Supports firmware upgrade Supports Flow Statistics Built-in firewall supporting IP address filtering, MAC address filtering and parental control Built-in DHCP server Supports IPv6 Supports Guest Network Supports WPS - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 12
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide modem router is operating in Bridge mode. Please refer to Note 2 for troubleshooting. (WLAN) Flash Off to the network by WPS function. Please refer to 4.6.2.1 WPS Setup for more information. On There is a device connected to this - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 13
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide , please contact your ISP to make sure if your Internet service is available now. 2. If the Internet LED is off, your ADSL LED is GREEN ON, please check your Internet configuration. You may need to check this part of information with - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 14
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 2) Use the Factory Default RESET button: With the router powered on, use a pin to press and hold the RESET button for at least 5 seconds. And - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 15
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 2. Connecting the Modem Router 2.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet). PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors. TCP/IP protocol on each PC. Web - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 16
problem, please contact your ISP. Before cable connection, cut off the power supply and keep your hands dry. You can follow the steps below to install it. Step 1: Connect the ADSL Line. Method one: Plug one end of the twisted-pair ADSL cable into the ADSL port on the rear panel TD-W8950N - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 17
150Mbps Wireless N ADSL2+ Modem Router User Guide • LINE: Connect to the wall jack • PHONE: Connect to the phone sets • MODEM: Connect to the ADSL port of TD-W8950N Plug one end of the twisted-pair ADSL cable into the ADSL port on the rear panel of TD-W8950N. Connect the other end to the MODEM - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 18
Router User Guide Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default IP address of the TD-W8950N 150Mbps Wireless - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 19
for your PC correct? If the router's IP address is 192.168.1.1, your PC's IP address must be within the range of 192.168.1.2 ~ 192.168.1.254. 3.2 Quick Installation Guide With a Web-based utility, it is easy to configure and manage the TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router. The Web - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 20
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-5 3. Choose the WAN Type for Internet access, and then click Next. Figure 3-6 Note: 1) The Quick Setup Wizard will guide you to configure the WAN Service over ATM interface. 2) If you are unwilling to configure WAN Service now, - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 21
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Note: Figure 3-7 If your country or ISP is not listed, please select Other. Then you can manually enter the VPI/VCI values and select WAN Link Type provided by your ISP. If Ethernet WAN is choosen, please select WAN Link Type provided - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 22
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide the default wireless password, the same as the PIN code, is printed on the bottom label. Click Next to continue. Figure 3-9 6. You will see the Summary screen below, click Confirm to make your settings take effect. Figure 3-10 14 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 23
(shown in Figure 4-1). The first table indicates the information about the version including Software and Hardware. The second table displays the current status of the TD-W8950N connection. This information will vary depending on the settings of the router configured on the Advanced Setup screen. 15 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 24
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-1 Note: Click the other submenus under the main menu Device Info, and you will be able to view the corresponding information about WAN, Statistics, Route, ARP and DHCP. 4.3 Quick Setup Please refer to Section 3.2 Quick - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 25
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide This Advanced Setup section mainly introduces how to configure the router for adequate use. The detailed explanations for each subsection are provided below. Note: To completely configure the WAN Interface, you need to first select the - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 26
(it is for PPPoE, IPoE, and Bridge), PPPoA (PPP over ATM) and IPoA (IP over ATM). Encapsulation Mode: The mode of the data processing over the Link Type you have selected. Uses the default setting, if you are not sure. Service Category: Select the type of the service assigned by your ISP in the - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 27
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide service, the Quality of Service menu will be added to the Web-based Utility, the detailed configuration will be described in 4.4.8 Quality of Service. 4.4.1.2 ETH Interface Choose "Advanced Setup""Layer2 InterfaceETH Interface", you can - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 28
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.4.2 WAN Service Choose "Advanced Setup""WAN Service", and you will instructions below to complete the further configuration of WAN Interface. There are five different configurations for the connection types, which are PPPoE, IPoE, Bridge - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 29
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-9 4. Enter the following parameters and then click Next. Figure 4-10 PPP Username/Password: Enter the User Name and Password provided by your ISP. These fields are case-sensitive. PPPoE Service Name: Enter the Service Name if - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 30
deployed by some ISP. Unless your ISP specifically requires this setup, do not select it. Use Static IPv4 Address: If your ISP gives you a static WAN, Gateway and DNS IP address, select this option to enter them manually. Enable PPP Debug Mode: Select this option to debug the PPP function and - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 31
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-12 Select DNS Server Interface from available WAN Interfaces: You can select this option to automatically get DNS server information from the selected WAN interface. Use the following Static DNS IP Address: You can select this - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 32
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Remove: Select the check service type on the screen (as shown Figure 4-9), and click Next button to continue. 4. Enter parameters in the following blanks to configure the WAN IP Address and click Next. Figure 4-15 Obtain an IP address - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 33
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Option 61 IAID: IAID (Identity Association following IP Address: If you are provided with a static IP/gateway Address, please select this option, and then enter the WAN IP Address, WAN Subnet Mask and WAN gateway IP Address manually. 5. - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 34
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Note: If you select the Enable NAT checkbox, the NAT menu will be added to the Web-based Utility. We will describe the detailed configuration PVC with IPoA is configured, you must enter static DNS server IP addresses. 8. On the next - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 35
and select IPoA option for DSL Link Type (see 4.4.1.1 ATM Interface). 2. Click the Add button on the screen Figure 4-7 and the next configuration is similar to IPoE (see section 4.4.2.2 ATM-EoA-IPoE). The difference is that you have to manually set the Static IP Address on the screen of Figure 4-15 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 36
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Note: ETH and ATM service can not coexist. If the ATM Interface had configured, you cannot configure any other WAN service over the ETH Interface until the ATM Interface is deleted. 4.4.2.6 ETH-PPPoE If your ISP provides a PPPoE - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 37
4.4.4.1 IPv4 LAN Config Choose "Advanced Setup""LAN" "IPv4 LAN Config", and you will see the LAN screen (shown in Figure 4-21), the section allows you to configure the router's LAN ports settings. Figure 4-21 IP Address: You can configure the router's IP Address and Subnet Mask for LAN Interface - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 38
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Subnet Mask: Enter the router's Subnet Mask, the default value is 255.255.255.0. Enable IGMP Snooping: If you select the option, please choose the IGMP Mode: Standard Mode or Blocking Mode. DHCP Server: These settings allow you to - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 39
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.4.4.2 IPv6 LAN Config Choose "Advanced Setup""LAN" "IPv6 LAN Config", and you will see the LAN screen (shown in Figure 4-23), here you can configure LAN IPv6 interface for your modem router. Figure 4-23 Interface Address (prefix - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 40
Click Save/Apply to make the configuration take effect. 4.4.5 NAT NAT (Network Address Translation) allows you to share one WAN (Wide Area Network) IP address for multiple computers on your LAN (Local Area Network). Note: When you select PPPoA or PPPoE for the WAN Setup, or when you select Enable - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 41
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.4.5.1 Virtual Servers Choose "Advanced Setup""NAT""Virtual Servers", you can set up virtual servers on the screen below (shown in Figure 4-25). Virtual servers can be used for setting up public services on your LAN, such as DNS, Email - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 42
the service from the drop-down list, the External Port Start, External Port End, Internal Port Start, Internal Port End and the Protocol will be added in the table automatically. You only need to enter the Server IP Address for the Virtual Server. 4.4.5.2 Port Triggering Choose "Advanced Setup""NAT - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 43
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-27 Port Triggering Table: The includes the Protocol and the Start and End value of the Open Ports. WAN Interface: The WAN Service Interface setting the Port Triggering. Add: Click the button to add a new entry. Remove: - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 44
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 3. Enter the Trigger Port Start, Trigger a new static IP Address assigned to it because its IP Address may change while using the DHCP function. 4.4.5.4 ALG Choose "Advanced Setup""NAT""ALG", and then you can configure the basic security - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 45
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-30 Click the Save/Apply button to save your settings. 4.4.6 Security Choose "Advanced Setup""Security", and you will see the security screen including IP Filtering and MAC Filtering (only effective in Bridging mode) submenus. - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 46
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-32 2. Enter the Filter name for the rule, it is exclusive and must be filled. 3. Select the protocol: TCP/UDP, TCP, UDP or ICMP in the drop-down list for the connection between the Source IP address and Destination IP address. 4. - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 47
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-33 Change Policy: There are two policies for the MAC Type in the drop-down list for the rule. 3. Enter Destination MAC Address and Source MAC Address in the text box. 4. Select the WAN interfaces from the drop-down list. 39 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 48
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 5. Click Save/Apply to save this entry and then you will see your settings as shown in Figure 4-34. 4.4.7 Parental Control Choose "Advanced Setup""Parental Control". You can configure the Parental Control on the screen as shown in Figure - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 49
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-37 2. Enter the User Name of the LAN device connected to the router. 3. To restrict the device where the browser is running, select the Browser's MAC Address radio button. The MAC Address allows you to configure the filter rules - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 50
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Disable: URL Filter function not access this URL address on the port. 4.4.8 Quality of Service Choose "Advanced Setup""Quality of Service", you can enable QoS (Quality of Service) on the screen shown save the current configuration. 42 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 51
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Note: The default DSCP mark is used to mark all egress packets that do not match any classification rules. 4.4.8.1 Queue Config Choose "Advanced Setup""Quality of Service""Queue Config", you can set up virtual servers on the screen - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 52
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-42 Name: Set a name for the entry. Enable: Select Enable option to take this entry effect. Interface: Assigned a specific Wan Service for this QoS queue entry. Queue Precedence: Specify precedence for this QoS queue entry. - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 53
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-43 Click the Add button Figure 4-43, and you can configure the QoS on the next screen. Figure 4-44 After you specify the condition, click Apply/Save to save the entry. 4.4.9 Bandwidth Control Choose "Advanced Setup""Bandwidth - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 54
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-45 Enable Bandwidth Control: Check this box to enable the Bandwidth Control function. Total Upstream Bandwidth (Kbps): Enter the upload speed through the WAN port. Total Downstream Bandwidth (Kbps): Enter the download speed - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 55
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-47 Rule Status: Select the status of the rule from the drop-down list to enable or disable the rule. IP Range: Enter a single IP address or a range of IP addresses. Port Range: Enter a single port or a range of ports. - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 56
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Note: The priority, max upstream/downstream rate and min upstream/downstream rate work on allocation of surplus upload/download Setup""Routing""Static Route". You can see the Static Route screen, this screen allows you to configure the - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 57
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-50 To add static routing entries: 1. Click the Add button in Figure 4-50, and you will see the screen as shown in Figure 4-51. 2. Enter the following data: Figure 4-51 IP Version: Select the version of IP. Destination IP - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 58
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.4.10.3 RIP Choose "Advanced Setup""Routing""RIP", you can see the screen as shown in Figure 4-52. Figure 4-52 Note: RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE). 4.4.11 DNS When you select the - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 59
screen allows you to configure the Dynamic DNS (shown in Figure 4-54). The modem router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP Address. The Dynamic DNS service allows you to alias a dynamic IP address to a static - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 60
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-54 To add a DDNS entry: 1. Click the Add button Save/Apply to save your settings. 4.4.12 DSL Choose "Advanced Setup""DSL", you can see the DSL Settings screen, this screen allows you to configure the DSL (shown in Figure 4-56). 52 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 61
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-56 You can select the modulation type, phone line pair and the capability of Bitswap or SRA. After you set them up, click Save/Apply to save the configurations. 4.4.13 UPnP Choose "Advanced Setup , obtain an IP address, convey its - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 62
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.4.14 Interface Grouping Choose "Advanced Setup""Interface Grouping", you can configure multiple ports to PVC and bridging groups to perform as an independent network. Figure 4-58 To support this feature, you must create mapping groups - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 63
If a vendor ID is configured for a specific client device, please REBOOT the client device attached to the modem to allow it to obtain an appropriate IP address. 4.4.15 IP Tunnel IPv6 tunnel is a kind of transition mechanism to enable IPv6-only hosts to reach IPv4 services and to allow isolated IPv6 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 64
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide IPv4 Address: The IPv4 address of the border relay router of 6RD tunnel. Click Save/Apply to make the configuration take Setup"""IP Tunnel""IPv4inIPv6". You can see the 4in6 tunnel configuration screen, this screen allows you to configure - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 65
the IPv6 address of the remote node. Click Save/Apply to make the configuration take effect Setup""IPSec", you can Add/Remove or Enable/Disable the IPSec tunnel connections on the screen as shown in Figure 4-64. Figure 4-64 This section will guide you to configure a VPN tunnel between two TD-W8950Ns - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 66
150Mbps Wireless N ADSL2+ Modem Router User Guide Note: You could also use other VPN routers to set VPN tunnels with TD-W8950N. TD-W8965N supports up to 10 VPN tunnels simultaneously. Click Add New Connection in Figure 4-64 and then you will enter the screen shown in Figure 4-65. Figure 4- - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 67
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Remote IPSec Gateway Address (URL/IPv4): Enter the destination gateway IP address in the box which is the public WAN IP or Domain Name of the remote VPN server endpoint. Tunnel access from local IP addresses: Choose Subnet if you want - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 68
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-66 Main Mode: Select Main Mode to configure the standard negotiation parameters for IKE phase1. Aggressive Mode: Select Aggressive Mode to configure Setup""Multicast", you can configure the IGMP protocol on the screen. 60 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 69
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-67 Click Apply/Save to save your settings. 4.5 IPTV Choose "IPTV", and you will see the screen as shown in Figure 4-68. Figure 4-68 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 70
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide VPI (0~255): Identifies the virtual path the min and max download speed through the WAN port. Click the Save/Apply button to save your settings. 4.6 Wireless Choose "Wireless", there are six submenus to configure Wireless LAN settings. - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 71
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide This page allows you to configure . BSSID: Show the MAC address of the router. Country: configure security features of the wireless LAN interface by manually setting the network authentication or through WPS (Wi-Fi Protected Setup - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 72
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.6.2.1 WPS Setup This section will guide you to add a new wireless device to an existing network quickly by WPS (or called QSS) method. Note: 1) This feature is available only when OPEN, WPA-PSK, WPA2-PSK or Mixed WPA2/WPA-PSK mode is - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 73
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Step 2: Press and hold the WPS button of the adapter directly for 2 or 3 seconds. Step 3: Wait for a while until the next screen of adapter appears. Click Finish to complete the WPS configuration. Figure 4-72 Method Two: Step 1: Press the - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 74
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-73 Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration. Figure 4-74 II. By PIN If the new device supports Quick Security Setup and the PIN method, you can add it to the network by - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 75
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Method One: Enter the PIN of wireless adapter Note: The PIN code of the adapter is always displayed on the WPS configuration screen. Step 2: For the configuration of the wireless adapter, please choose "Enter a PIN into my access point or - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 76
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-76 Note: In this example, the default PIN code of this adapter is 16952898 as the preceding figure shown. Method Two: Enter the PIN - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 77
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-77 Step 2: For the configuration of the wireless adapter, please choose "Enter a PIN from my access point" in the configuration utility of the WPS as below, and enter the PIN code of the router into the field after "Access Point - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 78
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.6.2.2 Manual Setup AP Follow the instructions below to configure security features of the wireless LAN interface manually. You can set the network authentication method, select data encryption, specify whether a network key is required to - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 79
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide encryption to associate with it. Follow the instructions below to configure the Shared Keys. Figure 4-80 Figure 4-81 Encryption strength: Select the appropriate level of encryption, 64-bit or 128-bit. 71 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 80
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Current Network Key: To indicate which WEP key to use, select a transmission key number. Network Key 1-4: If you want to manually enter the WEP keys, then enter them in the network Key 1-4 fields. Configure WEP Settings 1. Select Shared - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 81
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 2. WPA WPA security for wireless communication has been developed to overcome some of the shortcomings of WEP. WPA combines the key generation with the authentication services of a RADIUS server. Figure 4-83 WPA Group ReKey Interval: - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 82
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 7. Click Save/Apply to save the new configuration. Figure 4-84 3. WPA-Personal WPA-Personal requires a shared key and does not use a separate server for authentication. PSK keys can be ASCII or Hex type. 74 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 83
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-85 Wireless Network Key: Enter the key shared by the router and your other network devices. It must have 8-63 ASCII characters or 8-64 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 84
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-86 Note: If you click the option "Click here to display", the Figure 4-87 will pop-up, and it shows the password you have - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 85
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-88 WPA2 Preauthentication: Select Enable from the function, while leave it blank or enter "0" to disable it. 5. WPA2-Personal To configure WPA2-Personal settings, select the WPA2- Personal option from the drop-down list. The menu - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 86
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-89 6. Mixed WPA2/WPA Enterprise To configure Mixed WPA2/WPA Enterprise settings, select the Mixed WPA2/WPA Enterprise option from the drop-down list. The menu will change to offer the appropriate - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 87
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-90 7. Mixed WPA2/WPA-Personal To configure Mixed WPA2/WPA-Personal settings, select the Mixed WPA2/WPA-Personal option from the drop-down list. The menu will change to offer the appropriate - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 88
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-91 4.6.3 Wireless Schedule Choose menu "Wireless""Wireless Schedule", you can configure the Task Schedule as shown below. Figure 4-92 80 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 89
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Note: The time you set is the period you need the wireless off. Before configure the wireless Add: Click this button to add the MAC Address. Remove: Select the item of the MAC Address and click this button to remove it. When you click - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 90
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-94 When you finished making changes to the MAC Filter List screen, click Save/Apply to save the changes. 4.6.5 Wireless Bridge Choose "Wireless""Wireless Bridge", you will see the screen of Wireless--Bridge settings shown as below - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 91
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-96 Enabled (Scan): Select this option to enables wireless bridge restriction, method support wireless bridge, you should choose "Wireless""Security" to change authentication method to "open" or "shared" mode first. - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 92
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-98 Channel: Select the channel you want to use from the drop-down List. This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 93
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide : This option will allow you to configure the wireless transmit power. High transmit power connected wireless station's MAC address. Associated: Displays of the values on this page. To update this page and to show the current connected - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 94
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Key Update Period: Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update. Control: With this function, you can configure the Upstream Bandwidth and Downstream Bandwidth for guest - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 95
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.7.2 Station list Choose menu "Guest Network""Station list", you can see the MAC Address, Associated, Authorized, SSID and Interface. Figure 4-101 MAC: Displays the connected wireless station's MAC address. Associated: Displays - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 96
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.9.1 Settings This section provides three important functions for managing the router; they are Backup, Update and Restore Default (shown in Figure 4-103). The detailed manipulations are described below. Figure 4-103 4.9.1.1 Export Choose - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 97
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-105 2. Click the Save button, and save the file as the appointed file (shown in Figure 4-106). Figure 4-106 4.9.1.2 Import Choose "Management""Settings""Import", - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 98
: Click this button to restore the router's configuration to the factory defaults, and then follow the on-screen instructions to complete it. Account and Password: The default account name and its password are both admin. The default IP Address: 192.168.1.1. The default Subnet Mask: 255 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 99
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.9.2 System Log Choose "Management""System Log", you can see the System Log screen, this screen (shown in Figure 4-109) allows you to view the system log and configure the system log options. Figure 4-109 To View the System Log: Click the - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 100
be sent to the specified IP address and UDP port of the remote system log server. If the selected mode is Both, events will be sent to the local memory and the remote system log server. 4.9.3 SNMP Agent Choose "Management""SNMP Agent", you can see the SNMP-Configuration screen as shown below. SNMP - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 101
to notify when problems occur. System Contact: The location of the person that is identified as the system contact. Trap Manager IP: Enter the IP address of the SNMP Manager，where the SNMP Agent forwards trap notifications. Select the desired values and click Save/Apply to configure the SNMP - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 102
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-113 Inform: You can select the checkbox log on the router and manage it. Select the desired values and click Save/Apply to configure the TR-069 client options. 4.9.5 Internet Time Choose "Management""Internet Time", you can see - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 103
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.9.6 Access Control Figure 4-114 There are two submenus under the Access Control menu: Passwords and Remote router. The default password is the same as the user name, which is admin/admin, support/support, and user/user respectively. 95 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 104
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide To change the password: Figure 4-115 1. Select the access the DSL modem router, view configuration settings and statistics, as well as, update the router's software. 2) Both of admin and support accounts can do remote management. For - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 105
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-116 Web：Select this box, you can access your modem router via web. Telnet: Select this box, you can access your modem router via command line. ICMP(ping): Select this box, PC in public network can ping the WAN address of the - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 106
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide To update the router's software: 1. Download the latest software upgrade file from the TP-LINK website (http://www.tp-link 7) If necessary, reconfigure your PC's IP address to match your new configuration. 4.10 Logout Choose "Logout", and you - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 107
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-119 99 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 108
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Appendix A: Specifications General Standards Protocols Ports Cabling Type LED Safety & Emissions ANSI T1.413, ITU G.992.1, ITU G.992.2, ITU G.992.3, ITU G.992.5, IEEE 802.3, IEEE 802.3u, IEEE 802.11b , IEEE 802.11g , 802.11n TCP/IP, IPoA - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 109
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Appendix B: Configuring the PC In this section, we'll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter's manual if necessary. 1. Configure TCP/ - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 110
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure B-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Now you have two ways to configure the TCP/IP protocol below: Setting IP address automatically Select Obtain an IP - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 111
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Note: Figure B-3 For Windows 98 OS or before, the PC and Router may need to be restarted. Setting IP address manually 1 Select Use the following IP address radio button. And the following items available 2 If the modem router's LAN - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 112
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Now: Click OK to keep your settings. Figure B-4 104 - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 113
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Appendix C: Troubleshooting T1. What can I do if configuration settings will be lost and you will need to re-configure the router. T3. What can I do if I cannot access the web-based configuration page? 1) Configure your computer's IP Address - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 114
have been configured. If you still cannot access the configuration page, please restore your modem router's factory default settings and reconfigure your modem router following the instructions in 3.2 Quick Installation Guide. Please feel free to contact our Technical Support if the problem still - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 115
instructions in 3.2 Quick Installation Guide. 5) Please feel free to contact our Technical Support if the problem still exists. Note: For more details about Troubleshooting and Technical Support contact information, please log on to our Technical Support Website: http://www.tp-link.com/en/support - TP-Link TD-W8950N | TD-W8950N V1 User Guide 1910010940 - Page 116
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Appendix D: Technical Support Technical Support For more troubleshooting help, go to: http://www.tp-link.com/en/support/faq To download the latest Firmware, Driver, Utility and User Guide, go to: http://www.tp-link.com/en/support/
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
 |
 |
TD-W8950N
150Mbps Wireless N ADSL2+ Modem Router
Rev: 1.0.0
1910010940