TP-Link TD-W8950ND Quick Installation Guide
TP-Link TD-W8950ND Manual
 |
UPC - 845973060404
View all TP-Link TD-W8950ND manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TD-W8950ND manual content summary:
- TP-Link TD-W8950ND | Quick Installation Guide - Page 1
network connections to configure the Router. Power down all of your network devices, including your computer(s) and the Modem Router. If you currently use a modem, disconnect it now - the Modem Router will replace your current modem. Connect your computer to the LAN port on the Modem Router with an - TP-Link TD-W8950ND | Quick Installation Guide - Page 2
Modem Router and the other end to a standard electrical wall socket. Power on all your network devices and then check to see if the LEDs of the Router To configure the device, you can either run the setup CD-ROM (method one), or run the Web based Quick Setup Wizard (method two). TP-LINK strongly - TP-Link TD-W8950ND | Quick Installation Guide - Page 3
will pop up and show you how to connect your devices. After that, the Easy Setup Assistant will start. Click START, and then follow the step-by-step instructions until you complete the configuration The configuration has now been completed. Please skip to Step 3 "Testing the Internet Connection". 3 - TP-Link TD-W8950ND | Quick Installation Guide - Page 4
. Enter the default values and click OK. User name: admin Password: admin Click OK Note If the dialog box does not pop up, please refer to T3 in the Troubleshooting guide. T2 will help you if you forget the password. The web management page will display after a successful login. Click Quick Setup 4 - TP-Link TD-W8950ND | Quick Installation Guide - Page 5
skip to WAN Setup - Summary. Click Next Note If you did not get the Connection Type information, please contact your ISP for this information. Note Bridging mode is not recommended because multiple computers are not permitted to share Internet access in this mode. A. Configuration For PPPoE/PPPoA - TP-Link TD-W8950ND | Quick Installation Guide - Page 6
did not get the PPP Username or PPP Password, please contact your ISP for this information. Note The configuration for PPPoA is similar to that of PPPoE. After completing the above configuration, please proceed to Configuration. Wireless B. Configuration For MER Enter the parameters provided by - TP-Link TD-W8950ND | Quick Installation Guide - Page 7
After completing the above configuration, please proceed to Configuration. C. Configuration For IPoA Wireless Manually enter the IP address, Subnet Mask, default gateway and DNS server addresses provided by your ISP Click Next Click Next Note If you did not get the IP Address, Subnet Mask and - TP-Link TD-W8950ND | Quick Installation Guide - Page 8
D. Configuration For Bridge Mode Click Next After completing the above configuration, please proceed to Configuration. Wireless Wireless Configuration Create a unique and easy to remember name for your wireless network. You can also keep the default setting without the device being affected - TP-Link TD-W8950ND | Quick Installation Guide - Page 9
Modem Router while it's rebooting. The basic settings for your Router are completed. Please open the web browser and log on to the following websites: http://www.tp-link.com http://www.google.com If the above websites can be accessed, it indicates that your Router has been configured successfully - TP-Link TD-W8950ND | Quick Installation Guide - Page 10
T1. 2) Use the default user name and password: admin, admin. 3) Try to configure your Router once again by following the instructions in the previous steps of the QIG. T3. What can I do if I cannot access the web-based configuration page? 1) Configure your computer's IP Address For Windows XP OS Go - TP-Link TD-W8950ND | Quick Installation Guide - Page 11
Click Network Connections Right-click Local Area Connection Click Properties Double-click Internet Protocol (TCP/IP) 11 - TP-Link TD-W8950ND | Quick Installation Guide - Page 12
Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK Click OK 12 - TP-Link TD-W8950ND | Quick Installation Guide - Page 13
For Windows Vista OS Go to Start > Settings > Control Panel, and then you will see the following page. Click View network status and tasks Click View status Click Properties 13 - TP-Link TD-W8950ND | Quick Installation Guide - Page 14
Double-click Internet Protocol Version 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK 14 - TP-Link TD-W8950ND | Quick Installation Guide - Page 15
after the above settings have been configured. If you still cannot access the configuration page, please restore your Router's factory default settings and reconfigure your Router following the instructions of this QIG. Please feel free to contact our Technical Support if the problem persists. T4 - TP-Link TD-W8950ND | Quick Installation Guide - Page 16
and try again. 3) If you still cannot access the Internet, please restore your Router to its factory default settings and reconfigure your Router by following the instructions of this QIG. 4) Please feel free to contact our Technical Support if the problem still exists. Note For more details about - TP-Link TD-W8950ND | Quick Installation Guide - Page 17
Technical Support „ For more troubleshooting help, go to: www.tp-link.com/support/faq.asp „ To download the latest Firmware, Driver, Utility and User Guide, go to: www.tp-link.com/support/download.asp „ For all other technical support, please contact us by using the following details: Global Tel
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
 |
 |
1
Please use only wired network connections to configure the Router.
Power down all of your network devices, including your computer(s) and the
Modem Router. If you currently use a modem, disconnect it now - the Modem
Router will replace your current modem.
Connect your computer to the
LAN port on the Modem Router
with an Ethernet cable.
Connect the splitter to the wall
jack using a telephone line, then
use the other telephone line to
directly connect it to the LINE port
of the Modem Router and the
MODEM port of the splitter, also
have the PHONE port of the
splitter connected to a telephone.
Note
If no telephone is needed, please connect the LINE port of the Modem Router
to the wall jack using the telephone line directly.
Note