TP-Link TD-W8950ND User Guide
TP-Link TD-W8950ND Manual
UPC - 845973060404
View all TP-Link TD-W8950ND manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TD-W8950ND manual content summary:
- TP-Link TD-W8950ND | User Guide - Page 1
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router Rev: 1.0.0 1910010316 - TP-Link TD-W8950ND | User Guide - Page 2
are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to - TP-Link TD-W8950ND | User Guide - Page 3
in accordance with the instructions, may cause harmful interference the equipment off and on, the user is encouraged to try to correct the FCC RF radiation exposure limits set forth for an uncontrolled environment grant is applicable to only Mobile Configurations. The antennas used for this transmitter - TP-Link TD-W8950ND | User Guide - Page 4
environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions This device Luxembourg None General authorization required for network and service supply(not for spectrum) Norway Implemented This subsection - TP-Link TD-W8950ND | User Guide - Page 5
150Mbps Wireless Lite N ADSL2+ Modem Router Model No.: TD-W8950ND Trademark: TP-LINK We ETSI EN 300 328 V1.7.1: 2006 ETSI EN 301 489-1 V1.8.1:2008& ETSI EN 301 489-17 V2.1.1:2009 EN60950-1:2006 Recommendation : Yang Hongliang Product Manager of International Business TP-LINK TECHNOLOGIES CO., LTD - TP-Link TD-W8950ND | User Guide - Page 6
Environment Requirements 6 2.3 Connecting the Router ...6 Chapter 3. Quick Installation Guide 8 3.1 TCP/IP Configuration ...8 3.2 Quick Installation Guide 9 Chapter 4. Configuring the Router 14 4.1 Login ...14 4.2 Device Info ...14 4.3 Quick Setup...15 4.4 QSS...15 4.5 Advanced - TP-Link TD-W8950ND | User Guide - Page 7
4.8 Management ...69 4.8.1 Settings ...69 4.8.2 System Log ...70 4.8.3 SNMP Agent ...72 4.8.4 TR-069 Client ...72 4.8.5 Internet Time ...73 4.8.6 Access Control ...74 4.8.7 Update Software ...76 4.8.8 Reboot...77 Appendix A: FAQ...78 Appendix B: Configuring the PC 79 Appendix C: Specifications 83 - TP-Link TD-W8950ND | User Guide - Page 8
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Package Contents The following contents should be found in your package: ¾ One TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router ¾ One Power Adapter for TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router ¾ Quick Installation - TP-Link TD-W8950ND | User Guide - Page 9
Wireless Lite N ADSL2+ Modem Router User Guide Chapter 1. Product Overview Thank you for choosing the TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router. 1.1 Overview of the Router The TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router integrates 4-port Switch. The Wireless Lite N Router - TP-Link TD-W8950ND | User Guide - Page 10
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 1.2 Main Features ¾ Make use of IEEE 802.11n wireless technology to provide a wireless data rate of up to 150Mbps ¾ One RJ11 LINE port, four 10/100M Auto-Negotiation RJ45 LAN ports, supporting Auto MDI/MDIX ¾ Provides WPA/WPA2, WPA- - TP-Link TD-W8950ND | User Guide - Page 11
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 1.3 Panel Layout 1.3.1 The Front Panel The Router's LEDs are located on the front panel. Figure 1-1 The Router's LEDs and the QSS button are located on the front panel (View from left to right). Name Status Description Power ADSL - TP-Link TD-W8950ND | User Guide - Page 12
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 1.3.2 The Back Panel The Router's ports, where the cables are connected, and RESET button are located on the back panel. Figure 1-2 ¾ LINE: Connect to the Modem Port of Splitter or to the telephone line. ¾ Reset: There are two ways to - TP-Link TD-W8950ND | User Guide - Page 13
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Chapter 2. Connecting the Router 2.1 System Requirements ¾ Broadband Internet Access Service (DSL/Cable/Ethernet). ¾ PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors. ¾ TCP/IP protocol on each PC. ¾ Web - TP-Link TD-W8950ND | User Guide - Page 14
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 2-1 7 - TP-Link TD-W8950ND | User Guide - Page 15
Wireless Lite N ADSL2+ Modem Router User Guide Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default IP address - TP-Link TD-W8950ND | User Guide - Page 16
) Note: If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of 192.168.1.2 ~ 192.168.1.254. 3.2 Quick Installation Guide With a Web-based utility, it is easy to configure and manage the TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router. The Web-based utility - TP-Link TD-W8950ND | User Guide - Page 17
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 3-4 ) Note: 1) Do not mix up the user name and password with your ADSL account user name and password which are needed for PPP connections. 2) If the above screen does not pop up, it means that your Web-browser has been set to - TP-Link TD-W8950ND | User Guide - Page 18
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 3-6 4. The Connection Type page will display. Here we select PPPoE WAN Link Type for example. Figure 3-7 5. Enter the Username and Password given by your ISP and click Next to continue. 11 - TP-Link TD-W8950ND | User Guide - Page 19
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 3-8 6. The following page will display. Keep the default settings and click Next to continue. Figure 3-9 7. The Wireless -- Setup page will display. Click Next to continue. Figure 3-10 12 - TP-Link TD-W8950ND | User Guide - Page 20
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 8. You will see the Summary screen below, click Save/Reboot to save these settings. Figure 3-11 9. Now, your ADSL Modem Router has been configured and is rebooting. Please do not power off the Router while it's rebooting. After - TP-Link TD-W8950ND | User Guide - Page 21
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Chapter 4. Configuring the Router This chapter will show each Web page's key function and the configuration way. 4.1 Login After your successful login, you will see the six main menus on the left of the Web-based utility. On the right - TP-Link TD-W8950ND | User Guide - Page 22
W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ) Note: Click the other submenus under the main menu Device Info, and you will be able to view the corresponding information about WAN, Statistics, Route, ARP and DHCP. 4.3 Quick Setup Please refer to Section 3.2 Quick Installation Guide - TP-Link TD-W8950ND | User Guide - Page 23
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide I. By PBC If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC) method, you can add it to the network by PBC with the following two methods. Method One: Hardware push button. Step 1: Press the - TP-Link TD-W8950ND | User Guide - Page 24
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-4 Step 3: Wait for a while until the next screen appears. Click Finish to complete the QSS configuration. Figure 4-5 Method Three: Step 1: Keep the default QSS Status as Enabled and click the Add device button in Figure 4-2, - TP-Link TD-W8950ND | User Guide - Page 25
-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-6 Add A New Device Step 2: Choose Press the button of the new device in two minutes and click Connect. Step 3: For the configuration of the wireless adapter, please choose Push the button on my access point in the configuration - TP-Link TD-W8950ND | User Guide - Page 26
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide The QSS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods. Method One: Enter the PIN into my - TP-Link TD-W8950ND | User Guide - Page 27
W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide The QSS Configuration Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method Two: Enter the PIN from my Router Step 1: Get the Current PIN code of the Router - TP-Link TD-W8950ND | User Guide - Page 28
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ) Note: The default PIN code of the Router can be found in its label or the QSS configuration screen as Figure 4-2. c). You will see the following screen when the new device successfully connected to the network. ) Note: 1) The status - TP-Link TD-W8950ND | User Guide - Page 29
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 4.5.1 WAN Choose "Advanced Setup"Æ"WAN", and you will see the page of Wide Area Network (WAN) Setup as shown Figure 4-8 Figure 4-8 There are 4 PVC links in the WAN setup page. Click the Add button or choose the appropriate PVC - TP-Link TD-W8950ND | User Guide - Page 30
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-10 After choosing the proper protocol, enter the correct parameters supported by your ISP. Enable the configurations, and then you will go to the Internet. ) Note: The type of network protocol selected may be different in - TP-Link TD-W8950ND | User Guide - Page 31
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-11 PPP Username: Enter your username for your PPPoA connection to identify and verify your account to the ISP. PPP Password: Enter your password for your PPPoA connection. Authentication Method: Choose a method of - TP-Link TD-W8950ND | User Guide - Page 32
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-12 Click the Next button to enter the next step as shown in Figure 4-13. Click Save to complete the configuration. Figure 4-13 ¾ PPP over Ethernet (PPPoE) If you select the protocol of PPP over Ethernet (PPPoE), you will see - TP-Link TD-W8950ND | User Guide - Page 33
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-14 PPP Username: Enter your username for your PPPoE connection to identify and verify your account to the ISP. PPP Password: Enter your password for your PPPoE connection. PPPoE Service Name: Enter a name for the PPPoE - TP-Link TD-W8950ND | User Guide - Page 34
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-15 Click the Next button to enter the next step as shown in Figure 4-16. Click Save to complete the configuration. Figure 4-16 ¾ MAC Encapsulation Routing (MER) If you select the protocol of MAC Encapsulation Routing (MER), - TP-Link TD-W8950ND | User Guide - Page 35
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-17 Obtain an IP address automatically: This radio button is checked by default. You can obtain the IP address automatically. Use the following IP address and gateway: Check this radio button to enter the information - TP-Link TD-W8950ND | User Guide - Page 36
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-18 Click the Next button to enter the next step as shown in Figure 4-19. Click Save to complete the configuration. Figure 4-19 ¾ IP over ATM (IPoA) If you select the protocol of IP over ATM (IPoA), you will see the Figure 4- - TP-Link TD-W8950ND | User Guide - Page 37
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-20 WAN IP Address: Enter the IP Address provided by your ISP. WAN Subnet Mask: Enter the subnet mask provide by your ISP. Use the following default gateway: Check this radio button then you can choose Use IP Address or - TP-Link TD-W8950ND | User Guide - Page 38
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-22 ¾ Bridging If you select the Bridging protocol, you will see the Figure 4-23. Click the Next button. Figure 4-23 Then you will see the Figure 4-24. Click Save to complete the configuration 31 - TP-Link TD-W8950ND | User Guide - Page 39
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ) Note: Figure 4-24 After completing any setup, the new setup must be saved and the Router must be restarted for the configuration to go into effect. Please click the Save/Reboot button to restart as shown in Figure 4-25. ) Note: - TP-Link TD-W8950ND | User Guide - Page 40
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-26 ¾ IP Address - Enter an IP address for the Router. Then you can access the Web-based Utility via this IP address. The default setting is 192.168.1.1. ¾ Subnet Mask - An address code that determines the size of the network. - TP-Link TD-W8950ND | User Guide - Page 41
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide z End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.1.200 is the default end address. z Sunet Mask: An address code that determines the size of the network. Normally use 255. - TP-Link TD-W8950ND | User Guide - Page 42
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 3. Enter the MAC address in XX:XX:XX:XX:XX:XX format and reserved IP address in dotted-decimal notation of the computer for which you want to reserve an IP address. ) Note: The MAC Address and IP Address added in Figure 4-28 are used - TP-Link TD-W8950ND | User Guide - Page 43
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 4.5.4 NAT NAT (Network Address Translation) allows you to share one WAN (Wide Area Network) IP address for multiple computers on your LAN (Local Area Network). Figure 4-30 ) Note: When you select PPPoA or PPPoE for the WAN Setup, or - TP-Link TD-W8950ND | User Guide - Page 44
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ¾ Virtual Server Table: The table indicates the information about the Virtual Server entries. • Server Name: This is the name of the Virtual Server. It is exclusive and must be filled in. • External Port Start: The base number of - TP-Link TD-W8950ND | User Guide - Page 45
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 2. Select the service which you want to use from the drop-down list. If the list does not have the service you need, type the name of the custom service in the text box. 3. Type the IP Address of the computer in the Server IP Address - TP-Link TD-W8950ND | User Guide - Page 46
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-35 2. Select the application from the drop-down list. If the list does not have the application that you want, select the Custom application radio button, and type the name of the custom application in the text box. 3. Enter - TP-Link TD-W8950ND | User Guide - Page 47
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide You can enter the computer's IP address and then click Save/Apply to activate the DMZ host you set on this page. ) Note: DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must have its DHCP client - TP-Link TD-W8950ND | User Guide - Page 48
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide • FORWARDED means that all MAC layer frames will be forwarded except those matching with any of the specified rules in the following table. • BLOCKED means that all MAC layer frames will be blocked except those - TP-Link TD-W8950ND | User Guide - Page 49
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-42 The IP address filtering feature makes it possible for administrators to control user's access to the Internet, which is based on user's IP. The IP address filtering includes Outgoing and Incoming, the detailed - TP-Link TD-W8950ND | User Guide - Page 50
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 4. Enter a Source IP Address in dotted-decimal notation format and then type the Source Subnet Mask and Source Port (port or port: port) in the text boxes separately. 5. Enter a Destination IP Address in dotted-decimal notation format - TP-Link TD-W8950ND | User Guide - Page 51
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-46 2. Enter the Filter name for the rule, it is exclusive and must be filled in. 3. Select Protocol in the drop-down list, enter Source IP address, Source Subnet Mask, Source Port, Destination IP address, Destination Subnet - TP-Link TD-W8950ND | User Guide - Page 52
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide URL Filtering Global Policy - The default setting is FORWARDED. • FORWARDED means that all MAC layer frames will be forwarded except those matching with any of the specified rules in the following table. • BLOCKED means that all MAC - TP-Link TD-W8950ND | User Guide - Page 53
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-50 Select the desired application and click Save/Apply to make the setting effective. 4.5.5.5 Parental Control Choose "Security→Parental Control" menu, you can configure the parental control rule in the screen as shown in - TP-Link TD-W8950ND | User Guide - Page 54
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-52 To remove an existing entry, follow the steps below. 1. Check the box in the Remove column of the entry as shown in Figure 4-51. 2. Click the Remove button below. 4.5.6 Quality of Service Choose "Advanced Setup→Quality of - TP-Link TD-W8950ND | User Guide - Page 55
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 4.5.6.1 Queue Config Choose "Advanced Setup→Quality of Service→Queue Config", you can set configure QoS queues on the screen below. Figure 4-54 Click the Add button in Figure 4-54, and you can configure the QoS queue entry on the next - TP-Link TD-W8950ND | User Guide - Page 56
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-56 Click the Add button Figure 4-56, and you can configure the QoS on the next screen. Figure 4-57 After you specify the condition, click Save/Apply to save the entry. 4.5.7 Routing Choose "Advanced Setup→Routing" menu, you - TP-Link TD-W8950ND | User Guide - Page 57
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 4.5.7.1 Default Gateway Choose "Routing→Default Gateway" menu, you can configure the Default Gateway routing in the next screen as shown in Figure 4-59. Figure 4-59 ¾ Enable Automatic Assigned Default Gateway - Select this checkbox, - TP-Link TD-W8950ND | User Guide - Page 58
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 5. Click Save/Apply to save your configurations. Then you will go back to Figure 4-60 and see your new entry. Figure 4-61 4.5.8 DNS When you select the connection type PPPoE, PPPoA or IPoA for WAN configuration, you will see the DNS - TP-Link TD-W8950ND | User Guide - Page 59
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Click the Apply/Save button to save the new configuration. 4.5.8.2 Dynamic DNS Choose "Advanced Setup→DNS→Dynamic DNS", you can see the Dynamic DNS screen, this screen allows you to configure the Dynamic DNS (shown in Figure 4-64). - TP-Link TD-W8950ND | User Guide - Page 60
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 4.5.9 DSL Choose "Advanced Setup→DSL" menu, you can view and configure the parameters in the screen as shown in Figure 4-66. Figure 4-66 If you want to make some advanced settings, click Advanced Settings button in Figure 4-66 to go - TP-Link TD-W8950ND | User Guide - Page 61
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide If you want to select the tone, click the Tone Selection button to go to the ADSL Tone Settings page as shown in Figure 4-68. Figure 4-68 4.5.10 Port Mapping Choose "Advanced Setup→Port Mapping" menu, you can view and configure the - TP-Link TD-W8950ND | User Guide - Page 62
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-70 2. Enter the Group name and select interfaces from the available interface list and add it to the grouped interface list using the arrow buttons to create the required mapping of the ports. The group name must be unique. - TP-Link TD-W8950ND | User Guide - Page 63
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ) Note: You could also use other VPN Routers to set VPN tunnels with TD-W8950ND. TD-W8950ND supports up to 10 VPN tunnels simultaneously. Click Add New Connection in Figure 4-71 and then you will enter the screen shown in Figure 4-72. - TP-Link TD-W8950ND | User Guide - Page 64
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ¾ Remote IPSec Gateway Address: Enter the destination gateway IP address in the box which is the public WAN IP or Domain Name of the remote VPN server endpoint. (For example: Input 219.134.112.247 in Device1, Input 219.134.112.246 in - TP-Link TD-W8950ND | User Guide - Page 65
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ¾ Main Mode: Select Main Mode to configure the standard negotiation parameters for IKE phase1. ¾ Aggressive Mode: Select Aggressive Mode to configure IKE phase1 of the VPN Tunnel to carry out negotiation in a shorter amount of time. ( - TP-Link TD-W8950ND | User Guide - Page 66
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 4.6 Wireless Choose "Wireless", there are five submenus to configure Wireless LAN settings. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below - TP-Link TD-W8950ND | User Guide - Page 67
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ¾ Channel: This field determines which operating frequency will be used. The default channel is set to Auto, so the AP will choose the best channel automatically. It is not necessary to change the wireless channel unless you notice - TP-Link TD-W8950ND | User Guide - Page 68
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide more WLANs. If this checkbox is selected, you will have to set the following parameters as shown below. Make sure the following settings are correct ¾ SSID(to be bridged): The SSID of the AP your Router is going to connect to as a - TP-Link TD-W8950ND | User Guide - Page 69
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-74 ¾ Disable Security: If you do not want to use wireless security, select this check box, but it's strongly recommended to choose one of the following modes to enable security. ¾ WEP: It is based on the IEEE 802.11 standard. - TP-Link TD-W8950ND | User Guide - Page 70
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide • Type: you can choose the type for the WEP security on the pull-down list. The default setting is Automatic, which can select Open System or Shared Key authentication type automatically based on the wireless station's capability and - TP-Link TD-W8950ND | User Guide - Page 71
Wireless Lite N ADSL2+ Modem Router User Guide should be 30 or above. Enter 0 to disable the update. ¾ WPA-PSK/WPA2-PSK: It's the WPA/WPA2 authentication type based on pre-shared passphrase. • Version: you can choose the version of the WPA-PSK security on the drop-down list. The default setting - TP-Link TD-W8950ND | User Guide - Page 72
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-78 To filter wireless users by MAC Address, click Enable. The default setting is Disable. ¾ MAC Address: The wireless station's MAC address that you want to filter. ¾ Status: The status of this entry either Enabled or - TP-Link TD-W8950ND | User Guide - Page 73
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide To modify or delete an existing entry: 3. Click the Modify in the entry you want to modify. If you want to delete the entry, click - TP-Link TD-W8950ND | User Guide - Page 74
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-80 ¾ Beacon Interval: Enter a value between 40-3500 milliseconds. The Beacon Interval value indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Router to synchronize the wireless network. The - TP-Link TD-W8950ND | User Guide - Page 75
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-81 ¾ MAC Address - The connected wireless station's MAC address ¾ Current Status - The connected wireless station's running status, one of STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN - TP-Link TD-W8950ND | User Guide - Page 76
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 4.8 Management Figure 4-82 Choose "Management", and you can see the submenus as shown in Figure 4-83 Figure 4-83 4.8.1 Settings Choose "Management→Settings" menu, and you will see the submenus as shown in Figure 4-84. Figure 4-84 - TP-Link TD-W8950ND | User Guide - Page 77
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 4.8.1.1 Backup Choose "Settings→Backup" menu, and you can save the current configuration of the Router as a backup file in Figure 4-85. Click Backup Settings button to save your current configuration. Figure 4-85 4.8.1.2 Update Choose - TP-Link TD-W8950ND | User Guide - Page 78
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-88 Click the View System Log button, and you will go to the System Log page and see the logs similar to Figure 4-89. Figure 4-89 Click the Configure System Log button, and you will go to the Configuration page as shown in - TP-Link TD-W8950ND | User Guide - Page 79
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide logged. ¾ Display Level - All logged events above or equal to the selected level will be displayed. ¾ Mode - Select Local, Remote or Both. If the selected mode is Remote or Both, events will be sent to the specified IP address and UDP - TP-Link TD-W8950ND | User Guide - Page 80
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ¾ ACS URL: Please accept this information from your ISP. And through ACS (Auto-Configuration Server) you can perform auto-configuration, provision, collection, and diagnostics to this router. ¾ ACS User Name: Please accept this User - TP-Link TD-W8950ND | User Guide - Page 81
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-94 ¾ Automatically synchronize with Internet time servers: Select the checkbox to make your router synchronize its time with Internet time severs. ¾ First/Second NTP time server: Select a time server for your router. ¾ Time - TP-Link TD-W8950ND | User Guide - Page 82
-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-96 4.8.6.2 IP Address Choose "Access Control→IP Address" menu, and can view and configure the IP address access control in the screen as shown in Figure 4-97. If enabled, only PCs with IP addresses listed are allowed to access - TP-Link TD-W8950ND | User Guide - Page 83
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-99 4.8.7 Update Software Choose "Management→Update Software", you can see the screen (shown in Figure 4-100) which allows you to upgrade the latest version software to keep the Router up to date. Figure 4-100 ¾ Browse: Click - TP-Link TD-W8950ND | User Guide - Page 84
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide 3) Do not turn off the Router or press the Reset button while the software is being updated. 4) The Router will reboot after the Upgrading is finished. 4.8.8 Reboot Choose "Management→Reboot", you can see the screen (shown in Figure - TP-Link TD-W8950ND | User Guide - Page 85
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Appendix A: FAQ 1. How do I configure the Router to access Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router - TP-Link TD-W8950ND | User Guide - Page 86
-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Appendix B: Configuring the PC In this section, we'll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter's manual if necessary. 1. Configure - TP-Link TD-W8950ND | User Guide - Page 87
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 0-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Now you have two ways to configure the TCP/IP protocol below: ¾ Setting IP address automatically Select Obtain - TP-Link TD-W8950ND | User Guide - Page 88
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 0-3 ) Note: For Windows 98 OS or before, the PC and Router may need to be restarted. ¾ Setting IP address manually 1 Select Use the following IP address radio button. And the following items available. 2 If the Router's LAN IP - TP-Link TD-W8950ND | User Guide - Page 89
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Now: Click OK to keep your settings. Figure 0-4 82 - TP-Link TD-W8950ND | User Guide - Page 90
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Appendix C: Specifications General Standards Protocols Ports Cabling Type LED Safety & Emissions ANSI T1.413, ITU G.992.1, ITU G.992.2, ITU G.992.3, ITU G.992.5, IEEE 802.3, IEEE 802.3u, IEEE 802.11b , IEEE 802.11g , 802.11n TCP/IP - TP-Link TD-W8950ND | User Guide - Page 91
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver - TP-Link TD-W8950ND | User Guide - Page 92
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ¾ DNS (Domain Name Server) - The IP address of your ISP's server, which translates the names of websites into IP addresses. ¾ Domain - A specific name for a network of computers. ¾ DSL (Digital Subscriber Line) - An always-on - TP-Link TD-W8950ND | User Guide - Page 93
-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ¾ Network - A series of computers or devices connected for the purpose of data sharing, storage, and/or transmission between users. ¾ Ping (Packet Internet Groper) - An Internet utility used to determine whether a particular IP address - TP-Link TD-W8950ND | User Guide - Page 94
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide ¾ UDP (User Datagram Protocol) - A network protocol for The identifier of the VP contained in the ATM cell header. ¾ Update - To replace existing software or firmware with a newer version. ¾ VLAN (Virtual Local Air Network) - Logical
TD-W8950ND
150Mbps Wireless Lite N ADSL2+ Modem Router
Rev: 1.0.0
1910010316