TP-Link TD-W8960N Quick Installation Guide
TP-Link TD-W8960N Manual
 |
UPC - 845973060343
View all TP-Link TD-W8960N manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TD-W8960N manual content summary:
- TP-Link TD-W8960N | Quick Installation Guide - Page 1
configure the Router. Turn off all of your network devices, including your computer(s) and the Modem Router. If you currently use a modem, disconnect it now. The Modem Router will replace your current modem. Connect your computer to the Port labeled "1~4" on the Modem Router with an Ethernet cable - TP-Link TD-W8960N | Quick Installation Guide - Page 2
LEDs of the Modem Router display normally as the diagram below describes. Power: Solid light ADSL: Flashing or solid light WLAN: Flashing LAN: Flashing or solid light if the corresponding port is connected Note If the LEDs display abnormally, please check to see if all the cable connectors (power - TP-Link TD-W8960N | Quick Installation Guide - Page 3
two). TP-LINK strongly recommends that you run the setup CD-ROM. Insert the provided Resource CD into your CD-ROM drive. The Setup Wizard will automatically pop up on your computer's screen. Click Start Setup, and then follow the step-by-step instructions until you complete the configuration. The - TP-Link TD-W8960N | Quick Installation Guide - Page 4
. Enter the default values and click OK. User name：admin Password：admin Click OK Note If the dialog box does not pop up, please refer to T3 in the Troubleshooting guide. T2 will help you if you forget the password. The web management page will display after a successful login. Click Quick Setup 4 - TP-Link TD-W8960N | Quick Installation Guide - Page 5
and Password given by your ISP. If you want your Internet to remain permanently connected please uncheck the "Dial on demand" box. If your Internet is charged by time you may want to select this option in order to save money. If your ISP gives you a static DNS IP address, enter them manually. If - TP-Link TD-W8960N | Quick Installation Guide - Page 6
you a static WAN and DNS IP address, enter them manually. If not, select obtain them automatically. Click Next Wireless Parameters Configuration Choose a special name for your wireless network. In order to protect your wireless network from hackers and unauthorized users, it is highly recommended - TP-Link TD-W8960N | Quick Installation Guide - Page 7
in the Troubleshooting guide. Note For the advanced configurations，please refer to the User Guide on the CD-ROM provided. Note The above configurations only need to be set once. If you want other computers in your LAN to access the Internet, please connect the desired computer to the ADSL Router - TP-Link TD-W8960N | Quick Installation Guide - Page 8
to section T1. 2) Use the default user name and password: admin, admin. 3) Try to configure your Modem Router once again by following the instructions in the previous steps of the QIG. T3. What can I do if I cannot access the web-based configuration page? 1) Configure your computer's IP Address. For - TP-Link TD-W8960N | Quick Installation Guide - Page 9
Click Network Connections Right-click Local Area Connection Click Properties Double-click Internet Protocol (TCP/IP) 9 - TP-Link TD-W8960N | Quick Installation Guide - Page 10
Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK Click OK 10 - TP-Link TD-W8960N | Quick Installation Guide - Page 11
For Windows Vista OS Go to Start > Settings > Control Panel, and then you will see the following page. Click View Network Status and Tasks Click View Status Click Properties 11 - TP-Link TD-W8960N | Quick Installation Guide - Page 12
Double-click Internet Protocol Version 4 (TCP/IP) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK 12 - TP-Link TD-W8960N | Quick Installation Guide - Page 13
page again after the settings above. If you still cannot access the configuration page, please restore your Router to its factory default settings and reconfigure your router following the instructions of this QIG. Please feel free to contact our Technical Support if the problem still exists. 13 - TP-Link TD-W8960N | Quick Installation Guide - Page 14
your Modem Router by following the instructions of this QIG. 5) Please feel free to contact our Technical Support if the problem still persists. Note For more details about Troubleshooting and Technical Support contact information, please logon to our Technical Support Website: http://www.tp-link - TP-Link TD-W8960N | Quick Installation Guide - Page 15
Log on to the WEB Management Page. Click Wireless and select Security. Click Security Select Mixed WPA2/WPA-PSK Enter a security key using more than 8 characters (numbers or letters) Click Apply/Save Click Management Click Reboot Click Reboot 15 - TP-Link TD-W8960N | Quick Installation Guide - Page 16
Technical Support „ For more troubleshooting help, go to www.tp-link.com/support/faq.asp „ To download the latest Firmware, Driver, Utility and User Guide, go to www.tp-link.com/support/download.asp „ For all other technical support, please contact us by using the following: Global USA/Canada
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
1
Please use only wired network connections to configure the Router.
Turn off all of your network devices, including your computer(s) and
the
Modem Router. If you currently use a modem, disconnect it now. The
Modem Router will replace your current modem.
Connect your computer to the
Port labeled “1~4” on the
Modem
Router
with
an
Ethernet cable.
Connect the splitter to the wall
jack using a telephone line,
then use the other telephone
line to directly connect it to the
LINE port of the Modem
Router and the MODEM port
of the splitter, also have the
PHONE port of the splitter
connected to a telephone.
If no telephone is needed, please connect the LINE port of the Router to
the wall jack using the telephone line directly.
Note
Note