TP-Link TD-W9970 TD-W9970 V1 Quick Install Guide

Quick

Installation Guide

300Mbps Wireless N USB VDSL/ADSL Modem Router

TD-W9970/TD-W9970B

Via Web Browser

Option 1

2. Configuring the Modem Router

Connect your computer to the modem router (Wired or Wireless).

Or

Wireless

1

Connect wirelessly by using the default

network name (SSID) and password

on the product label printed on the

bottom of the modem router.

Wired

Ethernet cable

Open a web browser on the computer and configure the modem router according to the following main clues.

2

Enter

http://tplinkmodem.net

or

http://192.168.1.1

in the address bar. Type in

admin

for both the

username and password and click

Login

.

Note: If the login window does not appear, please refer to

FAQ->Q1.

Note: Per FCC regulations, all Wi-Fi products marketed in the

U.S. must be fixed to the U.S. region only.

a

Login

admin

admin

http://tplinkmodem.net

c

d

b

Choose

Quick Setup

in the main menu and then click

Next

to start the configuration. Select your

Region

and

Time Zone

from the drop-down list, and then click

Next

.

Region

Back

Next

United Kingdom

(GMT) Greenwich Mean Time; Dublin, Edinburgh, London, Lisbon

Time Zone

Quick Setup-Region and Time Zone

f

g

e

1. Connecting the Hardware

1

2

7106505744

REV1.0.2

Note: If you don’t need the phone service, just directly connect the VDSL port to the Phone Jack with a phone cable.

Notes:

Please wait 1-2 minutes until the DSL LED is on.

If the Wireless LED is off, please press the WiFi button on the rear panel for

2 seconds, then check the LEDs again in a few seconds.

Connect the splitter and power adapter as follows. Press the ON/OFF button and the

Power LED

turns on.

Check the Power and DSL LED lights to ensure the hardware connection is correct.

Select

Yes

to auto detect your connection type and then click

Next

to continue.

Back

Next

Quick Setup-Auto Detection

Yes.

No. I want to configure the Internet connection myself.

Auto-Detect Connection Type:

Enter the parameters provided by your ISP and then

click

Next

. Here we take

PPPoE

as an example.

Back

Next

XXXXXX

XXXXXX

XXXXXX

Quick Setup-PPPoE

DSL PVC:

Auto-detection has succeeded!

8/35

Encapsulation Mode:

LLC

Connection Type:

PPPoE

Username:

Password:

Confirm Password:

Enable 3G/4G as a backup solution for Internet access.

Quick Setup-3G/4G

Back

Next

Click

Next

to continue.

Note: You may rename your wireless network name and create your own

password.

Finish

Quick Setup-Complete

Operation Mode Configuring:

Success

WAN Connection Configuring:

Success

Gateway and DNS Configuring:

Success

3G/4G Connection Configuring:

Success

Wireless Configuring:

Success

Time Zone Configuring:

Success

Enjoy!

Now your wired and wireless devices

can connect to the Internet !

Note: If you have changed your

wireless network name and password,

you must sign in with the new

names/passwords to regain access to

the Internet.

Click

Save

and wait for your settings to

take effect. Click

Finish

to complete

the setup.

Back

Next

Quick Setup-Wireless

Wireless Network Name:

Password:

TP-LINK_XXXXXX

XXXXXXXX

Channel:

Mode:

Security:

Click

Next

to continue.

Note: You may enable 3G/4G as a backup method for Internet access.

*TD-W9970 is used for demonstration in this QIG.

VDSL

USB

LAN1

LAN2

LAN3

LAN4/WAN

POWER

WiFi

ON/OFF

WPS/

RESET

Phone Jack

Splitter

USB

LAN1

LAN2

LAN3

LAN4/WAN

POWER

WiFi

ON/OFF

WPS/

RESET

Power

On

DSL

On

Wireless

On

TP-Link TD-W9970 TD-W9970 V1 Quick Install Guide

TP-Link TD-W9970 Manual

TP-Link TD-W9970 manual content summary: