TP-Link TF-3239D User Guide
TP-Link TF-3239D Manual
 |
View all TP-Link TF-3239D manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TF-3239D manual content summary:
- TP-Link TF-3239D | User Guide - Page 1
of the TP-LINK TF-3239D/ TF-3239DL Adapter, please contact us. TP-LINK TECHNOLOGIES CO., LTD. Add: Fl.3, Bldg.R1-B, High-Tech Industrial Park, Shennan Road, Shenzhen, China E-mail: [email protected] Website: http://www.tp-link.com User's Guide TF-3239D/TF-3239DL 10/100M Fast Ethernet Adapter Ver - TP-Link TF-3239D | User Guide - Page 2
10/100M Fast Ethernet Adapters. This guide is to provide the installation and usage of the Products for network installers or users. The Product complies with PCI 2.1/2.2 specification and supports half/full duplex feature which can double network speed. The Adapters support both 10Mbps and 100Mbps
-
1 -
2
 |
 |
2
Ø
Supports ACPI, PCI power management
Ø
Complies with the IEEE802.3u
Fast Ethernet, 100Base-TX
standard and IEEE802.3 CSMA/CD 10Base-T standard
Ø
Supports Full Duplex Flow Control (IEEE 802.3x)
Ø
Full duplex design to double the performance
Ø
Supports Auto-Negotiation function
Ø
Auto-setups IRQ and I/O address
Ø
Contains
two large (2Kbyte) independent receive and transmit
FIFOs
Ø
One STP/UTP connector for 10Mbps or 100Mbps network Speed
Ø
Provides diagnostic software and one LED
to indicate network
Link/activity
Ø
Supports smart remote boot ROM and provides the help for
RPL/PXE(Exclude TF-3239DL)
Ø
Supports ODI Driver for NetWare 3.x, 4.x, NDIS Driver for LAN
Manager, Windows 95, Windows NT, Windows 2000, Packet
driver
forTCP/IP
Chapter 2 Installation
Card Installation
To insert The Product into your computer, follow
the steps list below.
1
Turn off
the computer
and
remove
its
cover.
2
Insert The Product into a PCI slot.
3
Secure the Product to the rear of the computer chassis and put
back the computer cover.
4
Connect the Product to
the network using
twisted-pair cables.
Driver Installation
Use the drivers supplied by the diskette included in The Product. For
detail description, please refer to "help" in the diskette provided by the
Product.
Appendix A: Troubleshooting
If you experience any problems with the adapter, first make sure the
appropriate driver is loaded, the proper cable is connected to the
adapter port and the hub complies with the adapter specification, such
as 10Mbps 10Base-T or 100Mbps 100Base-TX. Then recheck the LED.
The Product provided one
LEDs to indicate network status.
LINK/ACTIVE
LED
A red LED indicates if the 10 or 100Mbps STP/UTP has been link OK or
not and is working or not. When the light is OFF, it indicates
that the
STP/UTP port
has not been connected or link not OK; When the light
is ON, it indicates that the STP/UTP port link OK. When the light is
BLINKING, it indicates that the STP/UTP port is
receiving data or
transmitting data.
Appendix B: Technical Specification
Topology: Star
Connector Supported: RJ45
Standard: IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
Transmission Rate: 100Mbps or 200Mbps
Hardware: IBM PC compatibles(It must have PCI slot)
IRQ Line:
Assigned by system
I/O Address: Assigned by system
Software: ODI driver for NetWare 3.x, 4.x, NDIS driver for Microsoft
LAN manager and Windows 98, Windows ME, Windows NT, Windows
2000 Packet driver for TCP/IP
o
o
Temperature:
0
C to 40
C (Operating)
Humidity:
5% to 95% (Non-condensing)
Power consumption:
1W(Max)
Appendix C: Contact Information
TP-LINK TECHNOLOGIES CO., LTD.
For help with the installation or operation of the TP-LINK TF-3239D/
TF-3239DL Adapter, please contact us.
Add:
Fl.3, Bldg.R1-B, High-Tech Industrial Park, Shennan Road,
Shenzhen, China
E-mail:
Website:
4
3
5
User's Guide
10/100M Fast Ethernet Adapter
TF-3239D/TF-3239DL
71030429
Made in China
Ver: 2.0