TP-Link TL-MR3420 User Guide - Page 20
TL-MR3420, PPPoE, User Name, Password, Quick Setup - PPPoE - configure
UPC - 845973051495
View all TP-Link TL-MR3420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
TL-MR3420 3G/3.75G Wireless N Router Internet service is successfully detected by the Router. Figure 3-8 ¾ If the connection type detected is PPPoE, the next screen will appear as shown in Figure 3-9. Enter the User Name and Password provided by your ISP. These fields are case sensitive. If you have difficulty with this process, please contact your ISP. Figure 3-9 Quick Setup - PPPoE ¾ If the connection type detected is Dynamic IP, the next screen will appear as shown in Figure 3-11. Then you can go on with the wireless configuration. ¾ If the connection type detected is Static IP, the next screen will appear as shown in Figure 3-10. Enter the parameters in the corresponding blanks. -13-
TL-MR3420
3G/3.75G Wireless N Router
-13-
Internet service is successfully detected by the Router.
Figure 3-8
¾
If the connection type detected is
PPPoE
, the next screen will appear as shown in Figure 3-9.
Enter the
User Name
and
Password
provided by your ISP. These fields are case sensitive. If
you have difficulty with this process, please contact your ISP.
Figure 3-9
Quick Setup – PPPoE
¾
If the connection type detected is Dynamic IP, the next screen will appear as shown in Figure
3-11. Then you can go on with the wireless configuration.
¾
If the connection type detected is Static IP, the next screen will appear as shown in Figure
3-10. Enter the parameters in the corresponding blanks.