TP-Link TL-POE260S TL-POE260SUN V1.6 Installation Guide
TP-Link TL-POE260S Manual
 |
View all TP-Link TL-POE260S manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-POE260S manual content summary:
- TP-Link TL-POE260S | TL-POE260SUN V1.6 Installation Guide - Page 1
PoEInjector Note: For simplicity, we will take TL-POE160S for example in this Guide. Connection LED Explanation PWR On: Power on Off: Power off PoE (Only for TL-POE170S) On: Normal power supply Off: No powered device connected Flashing: - TP-Link TL-POE260S | TL-POE260SUN V1.6 Installation Guide - Page 2
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. The plug on the power supply cord is used as doesn't have a gigabit PoE port? A: Yes. All RJ45 ports of the PoE injector support 10/100/1000 Mbps. Q2. What can I do if my PoE injector doesn't supply - TP-Link TL-POE260S | TL-POE260SUN V1.6 Installation Guide - Page 3
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential (level VI) Polarity of d.c. power connector Class II equipment Caution Operator's manual
-
1 -
2 -
3
 |
 |
Installation Guide
Note:
1. The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE AP and PoE IP Phone through an Ethernet cable.
2. For TL-POE170S, plug the product into the wall outlets with earthing connection through the power supply cord.
PoE
Injector
Connection
IP Camera
AP
IP Phone
Powered Device (PD)
PWR
PWR+DATA OUT
DATA IN
Ethernet Device
(switch, router, etc.)
PoE+ Injector
Note:
For simplicity, we will take TL-POE160S for example in this Guide.
LED Explanation
On:
Power on
Off:
Power off
PWR
On:
Normal power supply
Off:
No powered device connected
Flashing:
Abnormal power supply
PoE
(Only for TL-POE170S)
© 2023 TP-Link
7106510148
REV1.2.0