TP-Link TL-PS110U User Guide

TP-Link TL-PS110U Manual

Get TP-Link TL-PS110U PDF manuals and user guides
UPC - 845973031008
View all TP-Link TL-PS110U manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link TL-PS110U manual content summary:

  • TP-Link TL-PS110U | User Guide - Page 1
    EMBEDDED WEB SERVER ...30 SETUP MENU ...37 INSTALLING PRINT SERVER ON NETWARE 4.X/5.X 42 SETTING UP A MACINTOSH COMPUTER 44 6. NETWORK PRINT MONITOR 48 PREPARATION ...48 TCP/IP PROTOCOL INSTALLATION 49 IPX/SPX-COMPATIBLE PROTOCOL INSTALLATION 49 NETBEUI PROTOCOL INSTALLATION 50 WINDOWS 95/98
  • TP-Link TL-PS110U | User Guide - Page 2
    PROBLEMS 66 WINDOWS 95/98/ME/NT/2000/XP/2003 TROUBLESHOOTING 67 MOVING THE PRINT SERVER TO A NEW SEGMENT 68 MOVING YOUR COMPUTER TO A NEW SEGMENT 69 NOVELL NETWARE TROUBLESHOOTING 69 TCP/IP TROUBLESHOOTING ...69 APPENDIX:...72 FREQUENTLY ASKED QUESTIONS 77 ADDITIONAL INSTALLATION INSTRUCTIONS
  • TP-Link TL-PS110U | User Guide - Page 3
    Trademarks NetWare is a registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP/2003/Vista are registered radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio Part No. PS110U-V1.0 3
  • TP-Link TL-PS110U | User Guide - Page 4
    Features 1-USB Port Print Server ․1 USB2.0 port ․Fast Ethernet network port: RJ-45 for 10Base-T or 100Base-TX ․1 LED to indicate Status(Orange), 2 LED's to indicate 10M(Orange) and 100M(Green) link lights ․1 LED to indicate USB port: Green for USB2.0, Orange for USB1.1 ․One Setup CD for Windows 95
  • TP-Link TL-PS110U | User Guide - Page 5
    (Orange) Connect with USB2.0 printer Connect with USB1.1 printer Before you start, you should prepare the following items: „ One Windows-based computer with print server setup CD „ One printer with a USB port „ One USB printer cable Hardware Installation To install the print servers, you need to
  • TP-Link TL-PS110U | User Guide - Page 6
    Wall-mount Information Note: We are not responsible for damages incurred by insecure wall-mounting hardware. Network Environment Wired Network with Print Server: Printer Print Server HUB Computer Computer Computer 6
  • TP-Link TL-PS110U | User Guide - Page 7
    /XP/2003 ․Apple EtherTalk ․UNIX /Linux system ․Internet (via Internet Printer Connection software) Configuration Solution Table Setup Operating System Function Remarks PSAdmin utility / Setup Wizard Windows Install a single Easy printer installation runs from print server 95/98/Me network on
  • TP-Link TL-PS110U | User Guide - Page 8
    document over Internet, replacing fax, mail Internet Printing Protocol- enabled print server Comment Configuration solution Table has many installations way to setup Windows 95/98/Me, Windows NT/2000/XP/2003, NetWare, UNIX / Linux system and Mac computer. Firstly, we introduce PSAdmin utility
  • TP-Link TL-PS110U | User Guide - Page 9
    print server in NetWare environments. The program can be installed from the setup CD of print server. Installing the PSAdmin and Print Server's Driver 1. To enable network communication with print server, your computer must have a proper IP address, e.g. 192.168.0.100 (the print server's default IP
  • TP-Link TL-PS110U | User Guide - Page 10
    Setup Wizard to install the print server and configure the connected printer. Note: The setup CD will install the print server's driver, PSAdmin and Setup Wizard into your computer. The default installation directory will be C:\Program files\Network Print Monitor. 4. Click Next, the wizard will
  • TP-Link TL-PS110U | User Guide - Page 11
    11
  • TP-Link TL-PS110U | User Guide - Page 12
    want change IP address to the print server, and then click Next. Note: The IP address of print server must be within the same subnet as your network adapter. 7. In the setup wizard, select an already configured printer from the list, click Next, Next and then Finish to complete the installation. or
  • TP-Link TL-PS110U | User Guide - Page 13
    Select Add New Printer if the print server is connected to a printer that hasn't been installed before and does not appear in the list. 13
  • TP-Link TL-PS110U | User Guide - Page 14
    8. Click Add New Printer to launch Windows Add Printer Wizard. 9. Click Next and select Local Printer, make sure the Automatically detect and install my Plug and Play printer check box is NOT checked. Then click Next. 14
  • TP-Link TL-PS110U | User Guide - Page 15
    10. Make sure the Use the following port radio-button is clicked and select LPT1: (recommended Printer Port) from the pull-down list. Then click Next. 11. Select Manufacturer and Printer from the lists of printer's driver. Then click Next. 15
  • TP-Link TL-PS110U | User Guide - Page 16
    network user, print a test page (please select No.), etc. Select the appropriate radio-button and click Next and Finish. 14. In the setup wizard, finish the installation by highlighting the installed printer in the Select a Printer list and click Next, NEXT -> Finish. 15. From Windows system, go
  • TP-Link TL-PS110U | User Guide - Page 17
    16. Right-click, select Properties -> Ports and verify that the print server's port appears. 17
  • TP-Link TL-PS110U | User Guide - Page 18
    Note: If you want to install more print servers, start setup wizard from your Windows Start menu: start -> All Programs -> Network Print Server -> PSWizard and repeat the installation procedure. Using PSAdmin After the software of setup CD is successfully installed, starts PSAdmin utility from your
  • TP-Link TL-PS110U | User Guide - Page 19
    select TCP/IP Wizard. 2 Select "Obtain an IP address from DHCP server". If there is a DHCP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server. This setting, by default, is disabled. If you would like to manually specify an
  • TP-Link TL-PS110U | User Guide - Page 20
    in a Print Queue Names. Note: Each print queue corresponds to each print port of the print server. 6. Click OK. 7. Done. 8. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to one of the NetWare print queues serviced by the print server. 20
  • TP-Link TL-PS110U | User Guide - Page 21
    ) In NDS Settings, Select NetWare file server(s), NetWare 4.x or later that print server can do NDS mode. 8. Click OK. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to one of the NetWare print queues serviced by the print server. 21
  • TP-Link TL-PS110U | User Guide - Page 22
    The default value is "Disable". Note: 1.Once this option is enabled, the following IP address, Subnet Mask, Gateway will be grayed out and are not available for editing. 2.While the print server supports DHCP, we strongly recommend you manually specify a fixed IP address to the print server. Specify
  • TP-Link TL-PS110U | User Guide - Page 23
    sure that the upgrade file is located in the same directory as PSAdmin. Reset 1. Click Reset button just like a picture ＜ ＞. 2. Reset allows the user to reset the print server device in order to establish a new connection or for new settings to take effect. Refresh 1. Click Reset button just like
  • TP-Link TL-PS110U | User Guide - Page 24
    " option instead). 10. Reset the print server by clicking the "Reset" icon from the PSAdmin. Done. Note: Please refer to NetWare's Print server/Services manuals for detailed PCONSOLE commands. Uninstalling the PSAdmin on Windows PC To help users easily remove all installed software components of the
  • TP-Link TL-PS110U | User Guide - Page 25
    3. Click Change or Remove Programs tab. 4. Select Network Print Monitor for Windows 95/98/NT/2000/XP/2003 and click Change/Remove button. 5. The un-installation wizard program will be launched. 6. Follow the directions on the screen to complete the un-installation procedure. 25
  • TP-Link TL-PS110U | User Guide - Page 26
    you can use a supported Web Browser, for example, Netscape or IE to view the embedded web server on the print server. Contact your administrator to get the IP address or URL of the printer and browse to the print server's web page. For example, to install Windows 2000 by IPP service you must follow
  • TP-Link TL-PS110U | User Guide - Page 27
    print server's IP address, for example, http://192.168.10.182/lp1. Then Click Next. ** One port should be the port name as lp1. 7.It will check print server to connect to HP printer, if not, it will appear as follow picture. Then Click OK. 8. Select the appropriate printer manufacturer and printer
  • TP-Link TL-PS110U | User Guide - Page 28
    to the print server or any standard printer MIB devices. For more information about a procedure or Windows in the HP Web JetAdmin software, see about HP's relation document. System Requirements HP Web JetAdmin software runs on Microsoft Windows NT, HP-UX, Solaris, Red Hat Linux and SuSE Linux system
  • TP-Link TL-PS110U | User Guide - Page 29
    your browser, navigate to HP Web JetAdmin's URL. For example: http://server.domain:port/ Follow the instructions on the appropriate home page to configure or modify your printer. Note: You can also substitute the server domain with TCP/IP address. Removing HP Web JetAdmin Utility To remove HP Web
  • TP-Link TL-PS110U | User Guide - Page 30
    the print server's System, Printer, NetWare, TCP/IP, SNMP and AppleTalk of status for the time being. Preparation Enter the print server's IP address in the Address field of your Web browser. Press Enter. Then the print server page will appear. From here you can configure all print server settings
  • TP-Link TL-PS110U | User Guide - Page 31
    of the print server. When you start the print server, it will compute the print server from start time to power off time. Firmware Version: This option allows you to view firmware version of the print server. To verify the print server's firmware version is newer in this time. MAC Address: This
  • TP-Link TL-PS110U | User Guide - Page 32
    option allows you to view model of the printer. When the printer connected with the print server, it will be show in the model box. Printing Language Supported: This option allows you to view command to set the printer. When the printer connected with the print server, it will be show in the command
  • TP-Link TL-PS110U | User Guide - Page 33
    network, this option allows the print server to obtain IP-related settings automatically from your DHCP server. IP Address: This option allows you to view IP address from the print server. The IP address must meet the IP addressing requirements of the network segment. (default: 192.168.0.10) Subnet
  • TP-Link TL-PS110U | User Guide - Page 34
    's name would be configured by PSAdmin utility. Polling Time: This option allows you to view polling time from the print server. This function is search for NetWare Server by per time. NetWare NDS Setting: Use NDS Mode: Enable or Disable. Name of the NDS Tree. Name of the NDS Content. Current Status
  • TP-Link TL-PS110U | User Guide - Page 35
    AppleTalk Settings: If no any zone exists, the print server itself displays the zone name as an asterisk (*) in the current AppleTalk Status of the print server in the web browser. Port Name: -xxxxxx-1, where xxxxxx represents the last six digits of the print server's Node ID. Printer Type
  • TP-Link TL-PS110U | User Guide - Page 36
    This option allows you to view SNMP communities from the print server. There are two communities that control message from the network management of the print server. SNMP Traps: This option allows you to view SNMP traps from the print server. SMB Status 3.Click Status, it then appears the sub-menu
  • TP-Link TL-PS110U | User Guide - Page 37
    to configure the print server. The setup menu of the print server helps administrator to setup the print server's System, Printer, NetWare, TCP/IP, SNMP and AppleTalk. Preparation Enter the IP address of the print server as the URL, default: 192.168.0.10. Then the print server's home page will
  • TP-Link TL-PS110U | User Guide - Page 38
    Location name of the print server. To confirm the print server's location name where the print server is located in the office's LAN. Password: This option allows you to input setup password of the print server. When you select setup menu of web configuration from the print server, it then as shown
  • TP-Link TL-PS110U | User Guide - Page 39
    ․User Name: You must be input the default administration user name, admin as login user name. ․Password: The default password is empty. After setup password is completed from the print server, you shouldn't forget this password. TCP/IP Setup: 1. Click Setup, it then appears the sub-menu. 2. Click
  • TP-Link TL-PS110U | User Guide - Page 40
    segment. Rendezvous Settings: Enable/Disable the Rendezvous support for Mac OS 10. SMB Workgroup/Shared Name Setting: This option allows you to change the SMB name of print server to support the SMB printing on Windows 2000 and above. NetWare Setup 1.Log into your NetWare file server as a Supervisor
  • TP-Link TL-PS110U | User Guide - Page 41
    the file server for servicing of print queues. Logon Password: This option allows you to input encrypted password from the print server. The print server login to NetWare server that administrator set password from selected print server. Use NDS Mode: To Enable NDS Mode, if you want to setup NDS
  • TP-Link TL-PS110U | User Guide - Page 42
    to finish installing your print server. 7. Log into your NetWare file server as a Supervisor (Admin.) or equivalent via a Bindery connection. 8. Run NetWare's PCONSOLE and add users to the "Queue Users" list. 9. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is
  • TP-Link TL-PS110U | User Guide - Page 43
    Note: Please refer to NetWare's Print Server/Services manuals for detailed PCONSOLE commands. AppleTalk Setup The print server can print jobs submitted from Macintosh workstations connected to an Ethernet using AppleTalk protocol. The basic configuration is for the print server in an AppleTalk
  • TP-Link TL-PS110U | User Guide - Page 44
    change the default Chooser name and Zone name of a PRINT SERVER by using your web browser before proceeding with this installation. Please see the previous section in this chapter for details. 2. If you use Mac OS 8.x or 9.x, please make sure your printer support PostScript. 5. Click Setup... button
  • TP-Link TL-PS110U | User Guide - Page 45
    Only access right in default. When an unusual condition or activity occurs, the SNMP agent alerts the SNMP manager through SNMP traps. Following list summaries SNMP trap messages that the print server will send out. Activities/SNMP Trap Messages Description Link Up or Link Down When the network
  • TP-Link TL-PS110U | User Guide - Page 46
    not correct. Users can set up print server's SNMP functions by using their browsers. 1.Click Setup, it then appears the sub-menu. 2.Click SNMP, it then as shown in the following picture. SNMP Community: The print server supports up to two community names. The default community name is public (case
  • TP-Link TL-PS110U | User Guide - Page 47
    The print server supports the SMB (Server Message Block) protocol, user can send the print jobs through Network Neighborhood without installing print server's driver. 1. Click Setup, it appears the sub-menu. 2. Click SMB, it as shown in the following picture. 3. Workgroup Name: This option allows
  • TP-Link TL-PS110U | User Guide - Page 48
    6. Network Print Monitor Preparation The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows 95/98/Me. Please make sure that the following steps have been completed before proceeding with installation under Windows PC. Select A Desired Protocol TCP/IP … The TCP/IP Protocol must
  • TP-Link TL-PS110U | User Guide - Page 49
    Note: Using TCP/IP protocol to access the print server requires well-configured TCP/IP settings. If you are not familiar with these settings, please consult your network administrator for details or ask for help. IPX/SPX-compatible Protocol Installation 1. Click Start, point to Settings, and select
  • TP-Link TL-PS110U | User Guide - Page 50
    to ensure a smooth installation: 1. Run Setup from the print server's NetWare, Win 95/98/Me/NT/2000/XP/2003 Setup diskette 2. The Network Print Monitor for Windows 95/98/Me Setup will then appear. Click Next. 3. A message reading, "Setup is complete. You may add the Network Print Port by using the
  • TP-Link TL-PS110U | User Guide - Page 51
    reading, "After your printer is installed, Windows can print a test page so you can confirm that the printer is set up properly." Select No and click Finish. 11. Double-click the newly created Printer Name icon. 12. Select Printer and Properties. 13. Click Details tab and select Add Port. 14. In the
  • TP-Link TL-PS110U | User Guide - Page 52
    one of the print server's ports from the list. Uninstalling Network Print Port on Windows 95/98/Me/NT/2000/XP/2003 To provide users an easiest way to remove all of the Network Print Port components from Windows 95/98/Me, the Network Print Port software comes with un-installation wizard program to
  • TP-Link TL-PS110U | User Guide - Page 53
    supports DHCP, we strongly recommend you manually specify a fixed IP address to the print server. By default, the print server's DHCP function is disabled. Windows NT LPR Port Printing Installation 1. Click Start, point to Settings, and select Printer. 2. Run Add Printer. 3. The Add Printer Wizard
  • TP-Link TL-PS110U | User Guide - Page 54
    the appropriate printer manufacturer and printer type list and click Next. 11. Select Shared. Type in a new Share Name or leave it in default and click Next. 12. A message reading, "After your printer is installed, Windows can print a test page so you can confirm that the printer is set up properly
  • TP-Link TL-PS110U | User Guide - Page 55
    Windows 2000/XP/2003 Standard TCP/IP Port Printing Installation 1. Click Start, point to Settings, and select Printer. 2. Run Add Printer, Click Next. 3. The Add Printer Wizard screen will appear, Select Local Printer and click Next. 4. From the type of Create a new port box as shown in the
  • TP-Link TL-PS110U | User Guide - Page 56
    6. In the Add Standard TCP/IP Printer Port Wizard box as shown in the following picture, Select Custom, Click Settings button, and click Next. 7. In the Configure Standard TCP/IP Port Monitor box as shown in the following picture, select LPR form Protocol, type in a queue name, for example, lp1. 8.
  • TP-Link TL-PS110U | User Guide - Page 57
    10. Select the appropriate printer manufacturer and printer type list and click Next. 11. Type in a new Printer name or leave it in default, and click Next button. 12. A message reading, "To confirm that the printer is installed properly, you can print a test page". Select Yes (Recommended) and
  • TP-Link TL-PS110U | User Guide - Page 58
    After the static IP address is assigned, the Print Server is ready to be configured. For some UNIX/Linux systems, we include the detailed installation procedures below. If you can't find the installation procedure corresponding to your UNIX system, please refer to your UNIX manuals for details about
  • TP-Link TL-PS110U | User Guide - Page 59
    Red Hat Linux 7.2/7.3 or later with X-Window system installed. 1. Make sure that the TCP/IP is well configured on your RedHat system, including network interface card's driver and IP-related settings say, IP address, subnet mask, and gateway IP). 2. Log in root. 3. Assign Print Server an IP address
  • TP-Link TL-PS110U | User Guide - Page 60
    7. Click Forward button. 8. In the Name field, type a user-defined name, click Forward. 60
  • TP-Link TL-PS110U | User Guide - Page 61
    . 10. In the Server field, type the IP address of print server 11. In the Queue field, type a print server's port name, which connect to the printer. For example: lp1. 12. Click Forward button. 13. In the Printer field, choose Postscript Printer. 14. Choose the model of printer and click Forward. 61
  • TP-Link TL-PS110U | User Guide - Page 62
    15. Done. 62
  • TP-Link TL-PS110U | User Guide - Page 63
    Log into your NetWare file server as a Supervisor (Admin.) or equivalent. 2. Ensure binary file is located in the PSAdmin directory. 3. Run PSAdmin from your Windows PC. 4. Click the Upgrade icon on tool bar. Upgrading the print server from Windows NT/2000/XP/2003 (Through TCP/IP) 1. Ensure binary
  • TP-Link TL-PS110U | User Guide - Page 64
    transfer to complete. 8. Quit from tftp. 9. Done. Upgrading the print server from Browser 1. Ensure binary file is located in your current working directory. 2. Enter the IP address of the print server as the URL. 3. Click Misc, and then choose Firmware Upgrade, it then as shown in the following
  • TP-Link TL-PS110U | User Guide - Page 65
    4. Click Browse... and select the firmware file. 5. Click Upgrade. 6. Done. 65
  • TP-Link TL-PS110U | User Guide - Page 66
    five times, contact your dealer for a replacement or repair. LAN (Green: 100Mbps; Orange: 10Mbps) USB (Green: USB2.0; Orange: USB1.1) Print server is being connected with USB printer. Power Related Problems The print server requires an external AC power adapter in order for it to function. If you
  • TP-Link TL-PS110U | User Guide - Page 67
    connection. If the pins are damaged, contact your dealer for a replacement connector. Windows 95/98/Me/NT/2000/XP/2003 Troubleshooting Multi-Segment LAN Environment Installation (through the Network Print Port) If your print server and Windows 95/98/Me/NT/2000/XP/2003 are located on two different
  • TP-Link TL-PS110U | User Guide - Page 68
    network segment to another after the initial installation, through the Network Print Port, the print server must be reconfigured on the original Windows NT server or on each Windows 95/98 computer using this print server in order for the print server's driver on each computer to re-establish a new
  • TP-Link TL-PS110U | User Guide - Page 69
    instructions. Novell NetWare Troubleshooting Many printing problems can be traced back to incorrect or incomplete print server installations. It is always wise to check the installation configurations first. In some cases, if necessary, delete the print server, print queue(s) or other setting
  • TP-Link TL-PS110U | User Guide - Page 70
    an unused IP address for your print server. C. The print server is on one segment and your Windows NT server is on the other segment. (This troubleshooting guide will also apply to a multiple-segmented network while installing the print server) For example, assuming the print server is on Segment
  • TP-Link TL-PS110U | User Guide - Page 71
    step you must specify an IP address which is valid on Segment B, such as 192.72.214.100 in this example, rather than 192.72.214.68. 7. Type, for example, "tftp 192.72.214.68 put config.txt" to save this new configuration back to print server. 8. Move the print server back to the Segment
  • TP-Link TL-PS110U | User Guide - Page 72
    Appendix: SMB Printing with Windows XP 1. Enable the SMB settings from the print server's WEB configuration. Assume your computers use the "WORKGROUP" as the SMB workgroup name in Windows. Please assign the same SMB name to your print server. If print server uses the different SMB name from
  • TP-Link TL-PS110U | User Guide - Page 73
    3. Double click it again. 4. Now you have to install the printer's driver. 73
  • TP-Link TL-PS110U | User Guide - Page 74
    5. Choose it from the "Add Printer Wizard". 6. Install printer successfully. 74
  • TP-Link TL-PS110U | User Guide - Page 75
    7. Now, you can find your printer's icon and you can use the SMB printing mode. 75
  • TP-Link TL-PS110U | User Guide - Page 76
    ! Perform a Factory Default: 1. Disconnect the external power adapter. 2. Hold down the reset button. 3. Reconnect the external reset button. Wait about 5~6 seconds. 4. Release the reset button. 5. The print server will restart. WARNING: This will erase all settings of print server to default and
  • TP-Link TL-PS110U | User Guide - Page 77
    the printer can cause printing errors. Install the proper printer driver. If these printer drivers are not available to you, please contact your printer manufacturer. Question C The upgrading process indication bar stops and does not seem to proceed again while upgrading the print server. Possible
  • TP-Link TL-PS110U | User Guide - Page 78
    exists in the specific NetWare file server as the one you specified in the Auto Setup dialogue box. Solution Specify a new print server name or queue name in the Auto Setup. Question G The setup Wizard can't find print server. Possible Explanation The Personal Firewall installed in your computer
  • TP-Link TL-PS110U | User Guide - Page 79
    Additional Installation Instructions Panasonic KX-P6100/6300/6500 If you are using a Panasonic KX-P6100/6300/6500 laser printer with the print server through the Network Print Port under Windows 95/98, please redirect the printer named "Panasonic KX-P6100 PCL" or "Panasonic KX-P6300 PCL", or "
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
T
ABLE OF
C
ONTENTS
C
OPYRIGHT
........................................................................................................................................
3
1.
INTRODUCTION
............................................................................................................................
4
P
RODUCT
O
VERVIEW
........................................................................................................................
4
C
OMPONENTS AND
F
EATURES
..........................................................................................................
4
H
ARDWARE
I
NSTALLATION
.................................................................................................................
5
N
ETWORK
E
NVIRONMENT
..................................................................................................................
6
W
IRED
N
ETWORK WITH
P
RINT
S
ERVER
:
...........................................................................................
6
2. PRINT SERVER INSTALLATION
..............................................................................................
7
P
REPARATION
....................................................................................................................................
7
C
ONFIGURATION
S
OLUTION
T
ABLE
...................................................................................................
7
3. SOFTWARE INSTALLATION
.....................................................................................................
9
I
NSTALLING THE
PSA
DMIN AND
P
RINT
S
ERVER
’
S
D
RIVER
...............................................................
9
U
SING
PSA
DMIN
..............................................................................................................................
18
W
IZARD
............................................................................................................................................
19
M
ANUAL
S
ETUP
...............................................................................................................................
21
R
EFRESH
..........................................................................................................................................
23
M
ULTIPLE
P
RINT
Q
UEUES
C
ONFIGURATION
...................................................................................
24
U
NINSTALLING THE
PSA
DMIN ON
W
INDOWS
PC
............................................................................
24
4. INTERNET PRINTER CONNECTION AND HP WEB JETADMIN
.....................................
26
IPP
O
VERVIEW
................................................................................................................................
26
HP
W
EB
J
ET
A
DMIN
O
VERVIEW
.......................................................................................................
28
I
NSTALLING
HP
W
EB
J
ET
A
DMIN
......................................................................................................
29
R
EMOVING
HP
W
EB
J
ET
A
DMIN
U
TILITY
.........................................................................................
29
5. CONFIGURATION FROM EMBEDDED WEB SERVER
......................................................
30
O
VERVIEW
........................................................................................................................................
30
U
SING
E
MBEDDED
W
EB
S
ERVER
....................................................................................................
30
S
ETUP
M
ENU
...................................................................................................................................
37
I
NSTALLING
P
RINT
S
ERVER ON
N
ET
W
ARE
4.
X
/5.
X
.........................................................................
42
S
ETTING
U
P A
M
ACINTOSH
C
OMPUTER
..........................................................................................
44
6. NETWORK PRINT MONITOR
..................................................................................................
48
P
REPARATION
..................................................................................................................................
48
TCP/IP
P
ROTOCOL
I
NSTALLATION
..................................................................................................
49
IPX/SPX-
COMPATIBLE
P
ROTOCOL
I
NSTALLATION
.........................................................................
49
N
ET
BEUI
P
ROTOCOL
I
NSTALLATION
..............................................................................................
50
W
INDOWS
95/98/M
E
/NT/2000/XP/2003
MANUAL
I
NSTALLATION
P
ROCEDURE
...........................
50
U
NINSTALLING
N
ETWORK
P
RINT
P
ORT ON
W
INDOWS
95/98/M
E
/NT/2000/XP/2003
.................
52
7. TCP/IP LPR PORT PRINTING INSTALLATION
...................................................................
53
B
ASIC
TCP/IP
I
NSTALLATION
O
VERVIEW
.......................................................................................
53
A
SSIGNING AN
IP
A
DDRESS
.............................................................................................................
53
W
INDOWS
NT
LPR
P
ORT
P
RINTING
I
NSTALLATION
.......................................................................
53
W
INDOWS
2000/XP/2003
S
TANDARD
TCP/IP
P
ORT
P
RINTING
I
NSTALLATION
...........................
55
UNIX
I
NSTALLATION
........................................................................................................................
58
1